Pcb Layout Engineer Jobs

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a PCB Layout Engineer to design high-density electronics for next-generation robotic systems. You will own PCB layout from floor planning through fabrication release, working closely with electrical, SI/PI, mechanical, and manufacturing teams. This role is based in San Francisco and requires in-person presence four days per week. In this role, you will: Own PCB layout, component placement, routing, and fabrication release for complex robotic systems. Collaborate with SI/PI engineers to refine layouts based on simulation results. Implement high-speed routing, controlled impedance, power distribution, decoupling, grounding, EMI/EMC, thermal, and mechanical-integration requirements. Work directly with fabricators and assembly partners to define stack-ups, establish design rules, drive DFM/DFA/DFT reviews, and close findings before release. Prepare fabrication and assembly documentation, including drawings, ODB++, drill files, stack-up tables, and manufacturing notes. Inspect newly received PCBAs and participate in board-level manufacturing failure analysis. Contribute to reusable design constraints and layout workflows, and maintain component-library assets such as symbols, footprints, and 3D models. You might thrive in this role if you: Have 6+ years of experience designing complex, multilayer PCBs. Are fluent in Cadence Allegro PCB Designer and Constraint Manager. Have strong HDI design experience, including fine-pitch BGAs, microvias, blind and buried vias, via-in-pad, and sequential lamination.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We're looking for an experienced Electrical Engineer to help develop the next generation of robotic systems at OpenAI. This role spans the full lifecycle of hardware development, from early concept exploration and prototyping through circuit design, component selection, PCB layout, bring-up, integration, and deployment. Engineers in this role are expected to independently drive significant hardware efforts from initial concept through deployment. You will translate ambiguous goals into concrete engineering plans, make key technical decisions, coordinate closely with cross-functional partners, and own execution through the iterations required to deliver a successful system. Many of the systems we build are still being defined. You will work closely with mechanical, firmware, software, controls, and research teams to evaluate new ideas, develop novel hardware, and integrate it into robotic platforms. Success in this role requires strong engineering judgment, comfort operating in ambiguous spaces, and the ability to balance rapid experimentation with the discipline required to build reliable and scalable systems. The ideal candidate enjoys building things from first principles and is equally comfortable evaluating a new technology, debugging a prototype on the bench, reviewing PCB layout details, and driving system integration efforts. You should be able to move quickly when appropriate, but also know when investing in robustness, simplicity, or infrastructure will create leverage for future development. This role is

What you’ll do Be the generalist EE for the scanner system: integration, bring-up, debugging, and making the electrical side of the device reliable and serviceable. Own ultrasound experimentations that feeds the image reconstruction team Design and execute experiment setups for transducer characterization (element sensitivity, bandwidth, cross-talk mapping, beam profile measurements) and ex vivo / phantom clinical testing. Acquire, process, and analyze RF and baseband signals for data quality assessment and benchmarking. Design simple boards and adapters as needed (monitoring, power/safety, interface/conditioning), and take them from prototype through a stable revision. Prototype quickly, then harden what works: wiring/harnessing, grounding, safety interlocks, and reliable integration across subsystems. Own practical test setups and documentation (fixtures, scripts, procedures) that make experiments repeatable and results comparable over time. What we’re looking for Strong hands-on EE background with experience building, debugging, and iterating on real systems in the lab. Solid understanding of signal processing fundamentals — knows what to measure, how to condition and digitize it, and how to evaluate signal quality in the context of an imaging system (SNR, bandwidth, dynamic range, artifacts). Comfortable spanning system integration + occasional design work (schematics/layout reviews or light PCB design) in a fast-moving environment. Ability to work at the boundary between hardware and algorithms: measure reality, communicate constraints, and help close gaps vs simulation. High agency and practicality: able to set up experiments, get trustworthy data, and unblock others on a lean team. Useful experience Analog/mixed-signal, or high-speed data capture experience; strong instincts for instrumentation and noise/debugging. Ultrasound or acoustic sensor handling: hydrophone calibration and field mapping, transducer impedance characterization, element-level sensitivity

PCB Layout Designer — Boise, ID - Main Site. Apply via Workday.

Staff Engineer - PCB Design — Bengaluru, India. Apply via Workday.

Dear Candidate We have immediate vacancies for the post of Electronics Engineer Fresher / Production / Quality / Design / PCB / Testing Engineer / Embedded / Software Engineer. Qualification : BE / B.Tech Freshers and Experienced Salary : 5 Lakhs Per Annum to 12 LPA Contact Mr Vasanth Managing Director 7353549756 / 8722187029 Karnataka Information Solution No.6, Basement Floor, ASVNV Bhavan, Opp State Bank Of India, K.G Road, Majestic, Bangalore - 09 PH : 080 22260106.

SJ Environmental Solutions is a leading provider and pioneer in water and wastewater treatment systems across Odisha. We specialize in the manufacturing, installation, and complete maintenance of advanced STP, ETP, and RO water purification technologies for diverse sectors. Join our growing team to build a long-term technical career in sustainable environmental infrastructure. We are looking for a skilled and responsible STP (Sewage Treatment Plant) & ETP (Effluent Treatment Plant) Operator to manage, monitor, and maintain our water treatment systems. The ideal candidate will ensure smooth daily operations, troubleshoot technical glitches, and maintain treated water quality strictly according to Pollution Control Board (PCB) standards. Timing : 8 AM to 5 PM Benefits 1. Training will be provided for fresher candidates. 2. Food & Accomodation will be provided. 3. PF & ESIC will be provided.

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role We’re looking for a product manufacturing engineer, who will be responsible for driving technical initiatives related to manufacturing to ensure product success from concept to launch and through mass production with a specific focus on PCB and PCBa manufacturing and process. You’ll have the opportunity to work with a wide range of stakeholders, from design engineering and operations teams,TPMs, external industry vendors and partners to ensure that all products are developed and delivered on time and to the highest quality standards. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: In this role, you’ll be responsible for driving manufacturing and quality initiatives to ensure product success from concept to launch Lead the product design and the manufacturing process for next-gen AI hardware system development, you will have the opportunity to work with a wide range of stakeholders, from design engineering and operations teams, TPMs and external industry vendors and partners to ensure that all products are developed and delivered on time and to the highest quality standards. Lead the team to establish NPI product manufacturing process, systems and quality controls, defining clear milestones and deliverables, drive internal process improvements across multiple terms and functions Provide hands-on product manufacturing analysis during desi

IoT Hardware Engineer Build the Future of Smart Connected Devices Join our growing team as an IoT Hardware Engineer and work on exciting IoT solutions that combine electronics, embedded systems, and smart technologies. We are looking for a passionate, hands-on engineer who enjoys designing, building, testing, and improving real-world connected devices. Key Responsibilities: Design, develop, and prototype IoT devices using ESP32 microcontrollers. Develop and integrate firmware, hardware components, and embedded systems. Select and evaluate sensors, actuators, communication modules, and electronic components for IoT applications. Participate in hardware design reviews and product improvement discussions. Assemble, test, and debug electronic prototypes for performance and reliability. Troubleshoot hardware and software issues using professional debugging techniques. Required Skills & Experience: ITI, Diploma in IT Hardware Engineering, Computer Engineering, Electronics, or related field (highly preferred). Strong experience in programming and working with microcontrollers, especially ESP32. Experience with embedded platforms such as ESP32, STM, and similar systems. Knowledge of sensor interfacing using I2C, SPI, UART, and other communication protocols. Excellent PCB soldering skills and experience building complex electronic prototypes. Strong understanding of electronics fundamentals including resistors, voltage levels, power management, and circuit design. Ability to use testing tools such as oscilloscopes and logic analyzers for debugging circuits. Preferred Skills: Experience with KiCad or other hardware design tools. Knowledge of low-power design techniques for battery-operated IoT devices. Understanding of power optimization and embedded system efficiency. Familiarity with Agile development methodologies. Who We’re Looking For: A creative and skilled IoT enthusiast who loves turning ideas into working hardware products. If you enjoy experimenting with e