Structural Analysis Engineer Jobs

Structural Analysis Engineer (Structural Analysis) — USA - Seal Beach, CA. Apply via Workday.

Structural Analysis Engineer - Experienced/ Senior — 5 Locations. Apply via Workday.

Senior Structural Analysis Engineer – Interiors Stress Company: The Boeing Company 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Interiors Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Aircraft Interiors products. Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. Leads development, integration and documentation of structural requirements to establish the Interior Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems an

Expert Structural Analysis Engineer – Systems Stress — USA - North Charleston, Seychelles. Apply via Workday.

Lead Structural Analysis Engineer — USA - Berkeley, MO. Apply via Workday.

Experienced and Lead Level Structural Analysis Engineer — USA - Long Beach, CA. Apply via Workday.

We're looking for a Senior Mechanical Engineer for Midjourney Medical — from precision electromechanical assemblies up to the large-scale structures and mechanisms that hold everything together and make it move. This role spans the full range of scale: one week you might be refining a compact transducer mount, the next you're architecting a structural frame or designing the motion system that positions hardware within it. This is a hands-on role on a small cross-functional team. You'll take problems from whiteboard sketch to working hardware yourself — designing in CAD, prototyping in the shop, testing, iterating, and integrating with research teams, electrical and software engineers along the way. We move fast and expect you to drive your own work: identifying what needs to happen next, making sound engineering calls without waiting for permission, and shipping hardware that works. What you'll do Own parts of the mechanical systems end to end — structures, mechanisms, and electromechanical integration Design large-scale structures: frames, weldments, enclosures, and support systems, with attention to stiffness, weight, manufacturability, and serviceability Design mechanisms: linkages, motion stages, actuation systems for precise, reliable positioning and articulation Integrate transducers, electronics, cabling, and thermal management into large physical systems Perform engineering analysis (tolerance stack-ups, structural/FEA, mechanism kinematics) to de-risk designs before committing to hardware Build and test relentlessly — 3D printing, rapid prototyping, and hands-on fabrication are core to how you'll validate designs Select parts and materials for system-level integration, balancing performance, cost, and lead time Drive projects independently from concept through validation, and collaborate closely with a small cross-disciplinary team to hit project goals What we're looking for Bachelor's degree in Mechanical Engineering or a related field 5+ years of experien

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

As an FEA Analyst (ANSYS) will be responsible for performing finite element analysis and simulations to assess the structural integrity and fatigue life calculation various wind turbine components products. The role involves collaboration with cross-functional teams to enhance designs using advanced simulation tools. Source: Adani Group | Job ID: 50348

We are seeking an experienced Senior Structural Engineer to lead the civil and structural design of RCC and structural steel projects across industrial and township developments. The role requires strong expertise in analysis, design review, tender engineering, multidisciplinary coordination, and site support, with a focus on safety, quality, compliance, and cost optimization Source: Adani Group | Job ID: 51874

Experienced Low Observables Mission Systems Integration Engineer Company: The Boeing Company We are seeking a Low Observables (LO) Design & Integration Engineer to support design and analysis activities for stealth/low-signature systems. The engineer will perform LO material and structure design, electromagnetic analysis, integration and test support, data processing, and technical reporting. The role requires practical experience with LO materials and technologies, solid electromagnetics knowledge, and hands-on expertise with computational electromagnetic (CEM) solvers used to design and optimize LO solutions. Key Responsibilities Perform design and analysis tasks for LO materials, coatings, treatments, and structural treatments to minimize radar, infrared, and other signatures. Develop and validate LO integration concepts for aircraft/vehicle structures and subsystems, including manufacturability and testability considerations. Use CEM solvers to model, simulate, and optimize LO components and systems (e.g., surface treatments, RAM, apertures, seams, RAM-structure interactions). Perform sensitivity studies and trade-offs across materials, geometry, and integration approaches to meet system-level LO requirements. Process and analyze measured test data from laboratory and flight/field tests; compare test results to simulation and iterate designs. Produce technical documentation: detailed analysis reports, integration guidance, test plans, and summaries suitable for engineering and program management audiences. Communicate technical results and recommendations to multidisciplinary teams and support design reviews. Support manufacturing and test engineering to ensure LO design intent is preserved through fab

Associate Loads and Dynamics Engineer Company: The Boeing Company The Boeing Defense, Space & Security (BDS) organization is seeking an Associate Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri . As an Associate Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the Air Dominance division. This position requires strong analytical problem solving skills and familiarity with one or more of the following: external loads, structural dynamics, aeroelastic stability, aerodynamics, aircraft stability and control, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in

Customer Quality & RMA Engineer Job Description POSITION OVERVIEW COMPANY OVERVIEW Infinitum Electric is a technology company pioneering the next generation of axial flux electric motors — lighter, more efficient, and more sustainable than conventional motor designs. Our motors are deployed in mission-critical applications for leading customers including hyperscale data center operators and industrial OEMs. As we scale rapidly in revenue, our Quality function is the backbone of customer trust and product integrity. POSITION SUMMARY The Customer Quality & RMA Engineer serves as the primary technical interface between Infinitum and its customers on all quality-related matters — including field complaints, warranty returns, RMA processing, corrective action management, and customer-facing quality reporting. This role owns the complete RMA lifecycle from customer notification through root cause resolution and verified closure, and is responsible for ensuring that every customer quality event is investigated with rigor, communicated with transparency, and resolved permanently. KEY RESPONSIBILITIES RMA Management & Field Complaint Resolution Own the end-to-end RMA process — from initial customer notification through receipt, inspection, root cause analysis, corrective action, and verified closure Triage and prioritize incoming field complaints and warranty returns based on customer impact, failure mode severity, and strategic account importance Conduct or coordinate physical inspection and failure analysis of returned motors and assemblies Maintain accurate, real-time RMA tracking data including cycle time, failure mode distribution, and cohort maturity trends Communicate RMA status, findings, and corrective actions to customers in a professional, timely, and technically credible manner Drive RMA rate reduction through systemic root cause analysis and closed-loop corrective action — targeting the structural elimination of recurring failure modes Custome

About the Team Industrial Compute is building the world's most advanced AI infrastructure. Working alongside our capital partners, engineering teams, and construction organizations, we design and deliver large-scale, mission-critical compute campuses that power the next generation of AI. Our Design organization brings together engineering, construction, and digital design to ensure facilities are coordinated, constructible, and optimized from the earliest planning phases through deployment. About the Role We are seeking a BIM Designer & Coordinator to support the planning and design of large-scale industrial and mission-critical facilities. In this role, you will develop, coordinate, and maintain multidisciplinary BIM models across Civil, Electrical, Mechanical, Architectural, and Structural disciplines, enabling early design validation, constructability reviews, equipment planning, and cross-functional coordination. You will partner closely with internal engineering teams, external design consultants, contractors, and project stakeholders to produce coordinated BIM deliverables that improve design quality, reduce project risk, and support efficient execution across Industrial Compute's global infrastructure portfolio. Key Responsibilities: Develop and maintain conceptual and schematic BIM models for large-scale industrial and MEP-intensive facilities. Coordinate BIM models across Civil, Electrical, Mechanical, Architectural, and Structural disciplines. Create and maintain federated models used for design reviews, spatial coordination, constructability analysis, and clash detection. Model major building systems including equipment layouts, utility corridors, electrical rooms, mechanical rooms, structural framing, site infrastructure, and architectural constraints. Coordinate equipment clearances, maintenance access, routing zones, shafts, risers, utility entrances, and major MEP pathways. Translate engineering sketches, basis-of-design documents, equipment lists

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. This Notice is provided as a result of the filing of applications for permanent alien labor certification for the positions noted below. Any person may provide documentary evidence bearing on an application to the Certifying Officer, U.S. Department of Labor, Employment and Training Administration, Office of Foreign Labor Certification, 200 Constitution Avenue NW, Room N–5311, Washington, DC 20210. Employer: Micron Technology, Inc. Job Title: Firmware Engineer Job Requisition: JR42883 Job Location: Longmont, Colorado Job Type: Full Time Rate of Pay: $100,000 to $254,000 Duties: Develop high-performance controller firmware for innovative volatile and non-volatile memory systems. Assist in evaluating, designing, building, bench testing, debugging, and failure analyzing firmware for new high-performance memory controllers and Solid State Drives that will increase performance, while reducing power, latency and SoC (System on Chip) complexity for the target markets. Work closely with system test engineers, system failure analysis engineers, firmware engineers, firmware test engineers, system hardware design engineers, product engineers, memory design engineers, firmware tools developers, and production engineers to solve cross-functional product development issues. Validate customer requirements and perform failure analysis on FW related issues. Develop structure