Electronics Assembly Operator in San Francisco

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a PCB Layout Engineer to design high-density electronics for next-generation robotic systems. You will own PCB layout from floor planning through fabrication release, working closely with electrical, SI/PI, mechanical, and manufacturing teams. This role is based in San Francisco and requires in-person presence four days per week. In this role, you will: Own PCB layout, component placement, routing, and fabrication release for complex robotic systems. Collaborate with SI/PI engineers to refine layouts based on simulation results. Implement high-speed routing, controlled impedance, power distribution, decoupling, grounding, EMI/EMC, thermal, and mechanical-integration requirements. Work directly with fabricators and assembly partners to define stack-ups, establish design rules, drive DFM/DFA/DFT reviews, and close findings before release. Prepare fabrication and assembly documentation, including drawings, ODB++, drill files, stack-up tables, and manufacturing notes. Inspect newly received PCBAs and participate in board-level manufacturing failure analysis. Contribute to reusable design constraints and layout workflows, and maintain component-library assets such as symbols, footprints, and 3D models. You might thrive in this role if you: Have 6+ years of experience designing complex, multilayer PCBs. Are fluent in Cadence Allegro PCB Designer and Constraint Manager. Have strong HDI design experience, including fine-pitch BGAs, microvias, blind and buried vias, via-in-pad, and sequential lamination.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

We're looking for a Senior Mechanical Engineer for Midjourney Medical — from precision electromechanical assemblies up to the large-scale structures and mechanisms that hold everything together and make it move. This role spans the full range of scale: one week you might be refining a compact transducer mount, the next you're architecting a structural frame or designing the motion system that positions hardware within it. This is a hands-on role on a small cross-functional team. You'll take problems from whiteboard sketch to working hardware yourself — designing in CAD, prototyping in the shop, testing, iterating, and integrating with research teams, electrical and software engineers along the way. We move fast and expect you to drive your own work: identifying what needs to happen next, making sound engineering calls without waiting for permission, and shipping hardware that works. What you'll do Own parts of the mechanical systems end to end — structures, mechanisms, and electromechanical integration Design large-scale structures: frames, weldments, enclosures, and support systems, with attention to stiffness, weight, manufacturability, and serviceability Design mechanisms: linkages, motion stages, actuation systems for precise, reliable positioning and articulation Integrate transducers, electronics, cabling, and thermal management into large physical systems Perform engineering analysis (tolerance stack-ups, structural/FEA, mechanism kinematics) to de-risk designs before committing to hardware Build and test relentlessly — 3D printing, rapid prototyping, and hands-on fabrication are core to how you'll validate designs Select parts and materials for system-level integration, balancing performance, cost, and lead time Drive projects independently from concept through validation, and collaborate closely with a small cross-disciplinary team to hit project goals What we're looking for Bachelor's degree in Mechanical Engineering or a related field 5+ years of experien

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.

About the Team The OpenAI Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role OpenAI Robotics depends on high-quality real-world robot data from a large, live operational environment. That environment has many deployed workcells, changing configurations, and little tolerance for downtime. We are seeking a Field Engineer to help keep that environment running well. You will own the day-to-day technical health of robotic workcells used in ongoing data acquisition operations, diagnose and resolve failures across hardware and software, and build the practical tools, documentation, and support workflows that make operators and technicians more effective. The work is close to the floor, close to the failure modes, and close to the research impact. This role sits at the intersection of software, robotics hardware, and live operations. The best people in it are practical, technically sharp, calm under pressure, and motivated by making real systems work reliably at scale. This role will be based in San Francisco, CA 5 days per week and offer relocation assistance to new employees. In this role, you will: Serve as an engineering owner for keeping a fleet of robotic workcells online in daily operation. Diagnose, fix, mitigate, or escalate issues spanning mechanics, electronics, controls, software interfaces, logs, and configuration. Partner closely with technicians, operators, and engineering teams to improve scalable fleet support processes. Build or spec lightweight hardware and software tools that improve monitoring, diagnostics, recovery, and handoffs. Create documentation, SOPs, and diagnostic playbooks that turn en

About the Team OpenAI’s Healthcare team is working to ensure that advances in AI meaningfully improve health for everyone. We build AI systems that support patients, clinicians, and healthcare organizations while setting a high standard for deploying AI responsibly in a high-stakes domain. On the Healthcare team, we are building products and infrastructure that bring OpenAI’s capabilities into healthcare organizations and clinical workflows. We serve health care systems, insurance companies, and the broad range of healthcare IT companies. Our products include connecting ChatGPT with healthcare data and systems and building reliable enterprise experiences that can operate within complex security, privacy, compliance, and interoperability requirements. We work closely with product, research, design, security, privacy, GTM, and our healthcare customers to turn powerful AI capabilities into dependable products that clinicians and healthcare organizations use in their everyday work. About the Role We are looking for backend and full-stack software engineers to build the systems behind OpenAI’s healthcare products. You will work across backend services, APIs, data systems, integrations, and product surfaces to connect AI with healthcare workflows and enterprise data. You’ll tackle the technical challenges involved in making these systems secure, reliable, observable, and scalable enough for real-world healthcare environments. This is a product-engineering role for someone who can move between customer problems and complex system architecture, and who is comfortable owning ambiguous problems end-to-end. In this role, you will: Design and build backend and full-stack systems powering OpenAI’s healthcare products. Build services, APIs, and data pipelines that connect OpenAI products with healthcare systems and enterprise data. Develop integrations with electronic health records and other healthcare data sources. Design systems that meet demanding requirements around privacy,

About the Team OpenAI develops models that can reason through complex problems and hardware designed for the demands of advanced AI. AI for Chips connects these efforts: applying increasingly capable AI systems to the work of semiconductor engineering. Our goal is to help engineers develop better chips and shorten design cycles. This work brings research, model training, and hardware expertise together to build tools that engineers can use on real designs, with correctness and measurable performance at the center. About the Role We’re hiring a Software Engineer to build the research infrastructure and tooling that help OpenAI models design silicon. You’ll turn chip-design workflows into reliable environments for reinforcement learning and evaluation, and make it easier for researchers to run experiments and iterate on new ideas. You’ll move between software engineering, tool integration, and open research problems. We value strong coding fundamentals, clear technical judgment, and independent execution. Prior chip-design experience is helpful, but you can learn the domain alongside the team’s hardware specialists. In this role, you will: Build and maintain infrastructure for reinforcement learning environments, evaluations, and long-running experiments. Integrate electronic design automation (EDA) tools into workflows for RTL generation, verification, and physical design optimization. Improve experiment reliability, reproducibility, observability, and performance; debug failures across tools, services, and infrastructure. Develop tooling and model harnesses that let researchers test ideas quickly and measure correctness and power, performance, and area (PPA). Collaborate with researchers and engineers to turn successful experiments into reusable systems and training workflows. Own ambiguous projects end to end, communicate progress, and use results to guide the next iteration. You might thrive in this role if you: Have strong software engineering fundamentals, with

Who are we? Cohere is the leading security-first enterprise AI company. We build cutting-edge foundation AI models and end-to-end products that are designed to solve real-world business problems. We’re training and deploying frontier models for enterprises who are building AI systems. We believe that our work is instrumental to the widespread adoption of AI and we are looking for folks that want to be part of that. We obsess over what we build. Each one of us is responsible for contributing to increasing the capabilities of our models and the value they drive for our customers. Cohere is a team of researchers, engineers, designers, and more, who are all passionate about their craft. We are a global technology company headquartered in Toronto with key offices in London, New York City, San Francisco, Montreal, Paris, Berlin and Seoul. Join us! About the Role Cohere is seeking an Indirect Tax Sr. Associate / Tax Manager to manage global indirect tax compliance, strategy, and reporting, focusing on VAT/GST and sales tax in Canada, the U.S., and other key markets. You’ll manage tax audits, optimize processes, collaborate cross-functionally, drive process and efficiency initiatives, and implement strategies to minimize liabilities while ensuring compliance. Key Responsibilities Manage end-to-end indirect tax compliance, including filings, registrations, and remittances for global VAT/GST, and US sales and use tax Streamline tax workflows, leverage tax automation tools and AI, and enhance data governance to improve efficiency Develop and implement indirect tax strategies aligned with Cohere’s business growth, product offerings (e.g., SaaS, AI services, Sovereign AI), and international expansion. Manage responses to tax audits and inquiries from authorities. Identify and mitigate tax risks, ensuring alignment with global tax regulations and internal policies Address digital services taxes and electronic services implications. Partner with Finance, Legal, and Product teams t