F 18 General Mechanic in United States

F-18 General Mechanic Company: Boeing Aerospace Operations Boeing Global Services is searching for F-18 General Mechanic willing to on 1st or 2nd shift at Naval Air Station (NAS) Joint Reserve Base (JRB) New Orleans in Belle Chase, Louisiana. This position is eligible for a Stipend payment in addition to salary for eligible candidates. Position Responsibilities: Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. General Mechanic: Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs coordinated combat turns and hot pit refuels. Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment. Uses technical data to diagnose and address maintenance problems on aircraft systems. Interprets and advises on maintenance procedures and

F-18 Landing Gear Technical Support Specialist Company: Boeing Aerospace Operations Boeing Global Services (BGS) is seeking an F/A-18 Landing Gear Technical Support Specialist in Fort Walton Beach, FL. This individual will compile, analyze and format data to produce engineering lifecycle products, services and processes. The specialist will verify regulatory conformance and contractual compliance, enforce configuration control, and maintain design and maintenance documentation to company, contractual and Navy standards. Position Responsibilities: Compile, analyze and format technical and maintenance data to produce and maintain engineering lifecycle products, spreadsheets, web pages (e.g., SENTINAL), and other documentation Verify regulatory conformance and contractual compliance of products using standard guidelines; identify and document nonconformances and follow through to resolution Maintain configuration control and design documentation per company, contractual and Navy standards (CNAFINST 4790.2 Series / NAMP) Read, interpret and apply Navy Technical Directives (TD), Supplemental Technical Certificates (STC), Airworthiness Directives (AD), and engineering guidance to ensure compliant repairs and configuration actions Create, update and maintain Assembly Service Records (ASR), Equipment History Records (EHR), and Scheduled Component Repair (SRC) cards IAW CNAFINST 4790.2 Series Administer and update the OOMA NALCOMIS Configuration Management Database to manage logsets, track life limits and record component histories Use and maintain Navy databases (e.g., NATEC, Deckplate) to support configuration and maintenance actions Process and track aircraft components for overhaul per OEM instructions

Associate Systems Engineering Support Analyst Company: The Boeing Company Boeing Defense, Space & Security (BDS has an exciting opportunity for an Associate Systems Engineering Analyst (Level 2) for Flight Simulation Labs , located in Berkeley, MO . The Flight Simulation Labs organization has expertise supporting marketing, design, development, integration, test and training objectives for Boeing military aircraft. As a Systems Engineering Analyst, you will be responsible for researching, analyzing, and compiling technical data to optimize system performance throughout the program lifecycle. You will apply systems engineering processes, methodologies, and tools to develop and refine system architectures, functional requirements, and product designs for programs such as T-7, F-15, F-18, and MQ-25. Position Responsibilities Apply systems engineering methodologies to design, develop, and maintain systems, tools, and new product solutions Serves as system administrator for Engineering tools in the Flight Simulation Labs organization Identifies opportunities and implements data analysis and automation including dashboard and reporting for the organization Derives and develops basic architecture, functional requirements, and product designs, ensuring alignment with project objectives Collaborates with cross functional project teams including engineering, IT, cyber, networking, software, customers, and suppliers to achieve organizational goals Engages in continuous improvement initiatives for all Flight Simulation Labs processes and tools This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government re

F/A-18 Super Hornet Avionics Technician Company: Boeing Aerospace Operations Boeing Global Services is searching for a F/A-18 Super Hornet Avionics Technician to join the team at NAS JRB New Orleans in Belle Chasse, LA. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at NAS JRB New Orleans in Belle Chasse, Louisiana. This position may be required to work at Stennis Facility in Kiln, Mississippi as required Position Responsibilities: Technician maintains the following: Aircraft avionics/electrical and associated equipment Remove and install avionics/electrical and related components and gear Perform Daily, pre and post flight and periodic aircraft inspections. Perform flight operation activities to include daily, turnaround, launch and recovery including plane captain activities Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mecha

F/A-18 Senior Systems Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Senior Systems Engineer to join the F/A-18 Systems Engineering Integration and Test (SEIT) Team in Berkeley, MO . The Senior Systems Engineer is responsible for leading cross-functional integration to drive engineering excellence in the execution of our F/A-18 software development activities. The individual selected for this role will be primarily focused on the Technical Integration role for Software Development and Advanced Systems activities. Position Responsibilities Ensure Engineering Excellence: Responsible for leading integration across multiple engineering and program teams to ensure safety, technical excellence, and product integrity. Drives adherence to Boeing and program processes, setting high standards for quality and performance Systems Engineering Approach: Ensure an integrated systems engineering approach. Take ownership to manage requirements and ensure full traceability. Manage the configuration of the integrated system to ensure dependencies are well understood. Responsible for ensuring comprehensive certification and verification activities, demonstrating a commitment to excellence Build Strategic Partnerships: Develop and nurture strong relationships with the United States Navy (USN), engineering functions, and program management. Leverage these partnerships to enhance collaboration and drive program success Manage Technical Baseline: Oversees the technical baseline, including mission systems configuration, technical performance measures, architecture diagrams, and Risk Identification and Opportunity (RIO) assessments. Foster

Early Career Mechanical Design Engineer Company: The Boeing Company Boeing Test & Evaluation (BT&E) is looking for an Early Career Mechanical Design Engineer to support the Environmental Test Design Engineering team in Berkeley, MO. The primary focus of this position is to support St. Louis Environmental Lab testing for local Boeing Defense & Space (BDS) programs. The design team works in partnership with the lab test teams to provide the designs and hardware needed to complete testing. Test capabilities within the Environmental labs include vibrational/structural dynamics, acoustic, airflow systems, fuel flow systems, high temperature flow impingement, and environmental control chambers, where temperature, humidity, and pressure are varied. Mechanical Design Engineers on the team design and modify test articles, fixtures, and support structures that integrate with our lab facilities. Design work ranges from adapters and fixtures to full test rigs and complete aircraft subsystems with their support structures. Responsibilities include designing interfaces to facility infrastructure such as supplied pressure, heating/cooling, power, hydraulics, and a full suite of instrumentation. Design Engineers support fabrication, installation, connection, and acceptance/check-out to deliver test-ready hardware. Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. As part of this team, you will have the opportunity to work on the latest military aircraft and weapons programs such as T-7A, F-15, F/A-18, MQ-25, JDAM, SDB, in addition to Phantom Works proprietary efforts. Position Responsibilities: Develop mechanical design criteria from

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time. Position Summary 21.00 Hourly &#43; 0 .75 Shift Differential. M-F 3pm-11pm Perform various duties to check orders and load store merchandise onto trailer and remove and palletize store returns, empty trays, and other materials from returning trailers. Required Qualifications Must be at least 18 years of age Ability to read, write, and count accurately Ability to operate and be certified as an operator of motorized material handling equipment Ability to stand for extended periods of time Good written and verbal communication skills Must be detail-oriented and have a high degree of accuracy Normal eyesight (natural or corrected) Ability to lift 100 lbs. Ability to work overtime Preferred Qualifications Previous warehouse experience Education High School diploma or equivalent preferred but not required Anticipated Weekly Hours 40 Time Type Full time<p style

F-22 Lead System Designer Company: The Boeing Company The Boeing F-22 Raptor team is seeking a Lead System Designer in Berkeley, MO to join the F-22 Raptor Mission System Design Team with a focus on developing cutting edge engineering solutions to continue to advance the world’s premier air superiority fighter, located in Berkeley, MO. The Lead System Designer will interact directly with customers, suppliers, partners, program management, integration, software, and test engineers. The selected applicant will be a member of a geographically dispersed, high-performing, collaborative team, and must be self-motivated with a strong work ethic, excellent time-management, and strong communication and interpersonal skills. The team operates in the Scaled Agile Framework (SAFe) to support all aspects of product development. The applicant will be expected to actively help the team to continuously improve and develop innovative and creative solutions to products and processes and to coach the team in system design best practices. Position Responsibilities: Collaboration with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system and software requirements for F-22 avionics sub-systems and weapon system architecture Resolve technical issues through coordination with engineering using established processes . . Manage Deliverables by defining plans for risk mitigation, issues, and opportunities; and, monitoring baseline plans to assess project performance, productivity, and lessons learned. Brief customer and program leadership on program status;

Kadena F-15EX Training Services Site Manager Company: Boeing Aerospace Operations This is an international assignment at Kadena Air Base on Okinawa, Japan . The Boeing Company is seeking a Site Manager to oversee USAF F-15EX flight simulator training services at Kadena AB. The Site Manager will lead a team of Boeing technicians and security supporting USAF F-15EX training. This training center consists of four F-15EX pilot stations, brief and debrief systems, network/computing systems, and the training system technical library. This is a Long-Term Assignment to Kadena AB, Japan for up to 3 years Relocation/assignment benefits to the international location will be provided. This team of technicians and security will provide training system operations, customer support, repair, troubleshooting, alignment/calibration, logistics and upgrades/modifications. The Manager will train, develop, and motivate employees; will oversee and approve technical approaches, products, and processes. This leader will develop and execute plans, implement policies and procedures, set operational goals, track site metrics and purchase accounts, and maintain relationships and partnerships with local USAF Wing and the contract simulator instructors. This manager will represent The Boeing Company to the USAF customer with minimal real-time oversight from Senior Management. Position Responsibilities: Manage a remote site team of device technicians supporting aircrew training operations. Develop and execute project and process plans, implement policies and procedures and set operational goals. Acquire resources for projects and processes, provide technical management of suppliers and lead process improvements. Develop and main

Job Title Disease management Solutions Clinical Support Specialist (90% Travel M-F) Job Description Disease management Solutions Clinical Support Specialist (90% Travel M-F) Help healthcare providers maximize the value of Philips Disease Management Solutions by delivering expert clinical training, product education, and implementation support across a highly customer-facing field role. Your role: Deliver hands-on and remote clinical training for Philips Disease Management Solutions products, with primary focus on DynaCAD and UroNav, ensuring customer competency and successful adoption. Serve as a trusted clinical consultant to physicians and technologists, providing education, workflow guidance, and application support that improves customer productivity and outcomes. Partner closely with Sales, Marketing, Service, Customer Support, Quality, Research & Development, and Manufacturing teams to support customer success, product implementations, and new product introductions. Demonstrate product expertise, you will be responsible for product assembly and installation for the UroNAV product as well as troubleshoot software and workflow issues, and help customers optimize their use of advanced imaging and post-processing solutions. Travel extensively (approximately 90%) to customer sites throughout the U.S., working from a home-based office and supporting changing customer locations as business needs require. You're the right fit if: You’ve acquired 5&#43; years of clinical experience as an MRI Technologist and/or Ultrasound Technologist, with strong knowledge of imaging workflows and patient care environments. Your skills include troubleshooting software, computer, networking, and basic Digital Imaging and Communications in Medicine (DICOM) issues, along with strong teaching, presentation, a

About Ramp Ramp is building the smart infrastructure for finance teams, embedded in the transaction flow of every dollar a business spends. We automate how over $200B in annualized spend flows in and out of 70,000+ companies: authorizing payments, flagging risk, categorizing spend, and closing books. The problems are high-stakes, data-dense, and unforgiving. We hire people with high agency and high urgency. We look for slope over intercept. We care less about where you trained and more about what you’ve built. At Ramp, everyone is a builder who owns problems end to end and makes consequential decisions that shape the outcome. The median Ramp customer saves 5% and grows revenue 16% in their first year – far in excess of businesses operating without Ramp. We believe every ambitious company deserves the same. If you want to build systems that directly shape how companies move and manage billions, Ramp is the place to do it. About the Role Technical Consultants are on the frontlines working to establish partnerships with Ramp customers, and act as a liaison between customers and our internal technical teams. You'll be partnering with Customer Activation & Account Management teams to identify, prioritize and build financial solutions for new and existing customers so that Ramp continues to scale with their needs. You will act as the technical and financial subject matter expert for our customers and design solutions that address the customer's needs through Ramp and partner integrations. You will partner with Post-Sales teams to drive Product, Design and Engineering teams' roadmaps to evolve Ramp to better serve our customers at scale and offer increasingly higher value. You will define the customer's financial & technical success criteria from onboarding through activation and expansion. You will represent Product, Design, and Engineering externally and will operate with deep conviction and understanding of Ramp's technical capabilities. The role requires techni

Training Device Technician (Training Device Maintenance) Company: Boeing Aerospace Operations Boeing Global Services (BGS) and the F-22 GTE Services Team are seeking a Mid-Level Training Device Technician (Maintenance) to support our team in Sheppard AFB, TX . This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the Sheppard AFB, Texas facility. Position Responsibilities: Provide F-22 training device maintenance services at Sheppard AFB, TX. Assists in repairs, tests, installs, configures, upgrades and assists in the modification of F-22 Maintenance Training Device (MTD) components, devices, hardware and software. Performs detailed inspections for pre-operations, post-operations and component handling. Inspect components and LRU's to verify status prior to installation. Consults with engineers in troubleshooting systems and support equipment. Troubleshoot to isolate mechanical or electrical faults and repair faulty components. Performs functional test of training device systems and monitors device instrumentation and indicators. Performs a multi-disciplined range of technical systems applications and activities. Installs, configures and maintains multi-platform systems hardware, software and components. Ensuring systems conform to architectural objectives. Evaluates complex system’s production readiness and supportability. Documents work by engineering planning documents and/or technical manuals. Excellent customer interface skills and communication skills, both oral and written, are required. Must be able to work independently, one-on-one, and in a team setting. Logisti

Lead Analyst Company: The Boeing Company Boeing F-22 Mission Systems team is hiring for a Lead Analyst located in Berkeley, MO . As Lead Analyst, you will be responsible for analyzing engineering solutions for the F-22 Raptor, including both enhancing existing field units with the addition of new capabilities as well as architecting and testing completely new systems. In this role you will be joining a cross-functional team to progress our products through the development lifecycle. Position Responsibilities: Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Must be able to work in a fast-paced, collaborative environment, engaging with multiple teams and being responsive to agile requirements and critical path customer need dates. Collaborates with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system requirements for F-22 avionics sub-systems and weapon system architecture Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications in support of lab and operational environments Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a US Secret Security Clearance for which the US Government requires US Citizenship A final Secret Clearance

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time. This job is eligible for same day offers as part of our Direct Hire program. Hours: M- F 5:00am-1:00pm with Mandatory Overtime We are seeking a detail-oriented Pharmacy Order Selector to join our distribution team. This role is responsible for accurately selecting and preparing pharmacy orders for shipment, ensuring compliance with safety and regulatory standards. If you enjoy working in a fast-paced environment and value accuracy and quality, this is a great opportunity for you! Responsibilities Accurately pick and pack pharmacy orders based on system-generated lists. Verify product information, lot numbers, and expiration dates to ensure compliance. Prepare orders for shipment by labeling and securing packages. Maintain a clean and organized work area following all safety and regulatory guidelines. Assist with inventory control and cycle counts as needed. Participate in training for additional warehouse and compliance duties. Qualifications Strong attention to detail and organizational skills. Ability to lift up to 50 lbs and stand for extended periods. Ability to work independently and as part of a team. Previous experience in pharmacy or distribution preferred (0–2 years). Education High school diploma or equivalent required.

JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. JLL - Contract Administrator (P3) Location: Anywhere in the US Work Schedule: Remote, M-F 8 AM - 5 PM Reports to: Senior Director, Division Operations Estimated compensation for this position is: $76,100 - $90,000 annually What this job involves: JLL's Technology Division is seeking an experienced Contract Administrator to manage fiber contracts for one of our largest clients. This role is crucial for maintaining the client’s interest in contractual engagements and ensuring that all agreements align with legal standards, optimizing the contractual management system, ensuring data accuracy, and facilitating smooth vendor relationships. The ideal candidate will be adept at managing complex information, responding to inquiries, and tracking critical deadlines. This role offers an opportunity to contribute to JLL's commitment to excellence in lease administration and client service. Join our team and help drive efficiency in our lease management processes! What your day-to-day will look like: Abstract and input critical data into the contract management system Manage the onboarding process for landlords and vendors, including documentation and ticketing system entry Collaborate with various departments to facilitate the execution of contracts and address any is