Actuator Electromagnetic Design Engineer

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design, build, and own the mechanical side of our robotic actuator dynamometer and test infrastructure. You will create the test stands, couplings, fixtures, load paths, guarding, and serviceable lab hardware that enable rigorous characterization of robotic actuators. This role combines precision mechanical design with hands-on lab work. You will take robotic actuator test infrastructure from requirements and analysis through CAD, fabrication, assembly, commissioning, and iteration, partnering closely with electrical and software engineers to deliver safe, flexible, high-uptime test cells. In this role, you will Own the mechanical architecture of dynamometer and actuator test cells, including frames, bases, load paths, alignment, guarding, and serviceability. Design dynamometer structures, robotic actuator fixtures, load-motor mounts, couplings, shafts, bearings, adapters, and torque-reaction hardware. Translate robotic actuator test requirements into robust mechanical systems for torque, speed, thermal, durability, backdrive, efficiency, and failure testing. Perform first-principles analysis and simulation for stiffness, strength, fatigue, vibration, thermal growth, critical speed, and safety factors. Create precise, repeatable alignment strategies that protect test articles, load machines, sensors, and couplings. Design modular fixturing that supports rapid changeover across actuator and motor variants without compromising measurement quality. Work closely with electrical engineers on cable routing

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.