Electrical Engineer - DoorDash Air

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We're looking for an experienced Electrical Engineer to help develop the next generation of robotic systems at OpenAI. This role spans the full lifecycle of hardware development, from early concept exploration and prototyping through circuit design, component selection, PCB layout, bring-up, integration, and deployment. Engineers in this role are expected to independently drive significant hardware efforts from initial concept through deployment. You will translate ambiguous goals into concrete engineering plans, make key technical decisions, coordinate closely with cross-functional partners, and own execution through the iterations required to deliver a successful system. Many of the systems we build are still being defined. You will work closely with mechanical, firmware, software, controls, and research teams to evaluate new ideas, develop novel hardware, and integrate it into robotic platforms. Success in this role requires strong engineering judgment, comfort operating in ambiguous spaces, and the ability to balance rapid experimentation with the discipline required to build reliable and scalable systems. The ideal candidate enjoys building things from first principles and is equally comfortable evaluating a new technology, debugging a prototype on the bench, reviewing PCB layout details, and driving system integration efforts. You should be able to move quickly when appropriate, but also know when investing in robustness, simplicity, or infrastructure will create leverage for future development. This role is

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

What you’ll do Be the generalist EE for the scanner system: integration, bring-up, debugging, and making the electrical side of the device reliable and serviceable. Own ultrasound experimentations that feeds the image reconstruction team Design and execute experiment setups for transducer characterization (element sensitivity, bandwidth, cross-talk mapping, beam profile measurements) and ex vivo / phantom clinical testing. Acquire, process, and analyze RF and baseband signals for data quality assessment and benchmarking. Design simple boards and adapters as needed (monitoring, power/safety, interface/conditioning), and take them from prototype through a stable revision. Prototype quickly, then harden what works: wiring/harnessing, grounding, safety interlocks, and reliable integration across subsystems. Own practical test setups and documentation (fixtures, scripts, procedures) that make experiments repeatable and results comparable over time. What we’re looking for Strong hands-on EE background with experience building, debugging, and iterating on real systems in the lab. Solid understanding of signal processing fundamentals — knows what to measure, how to condition and digitize it, and how to evaluate signal quality in the context of an imaging system (SNR, bandwidth, dynamic range, artifacts). Comfortable spanning system integration + occasional design work (schematics/layout reviews or light PCB design) in a fast-moving environment. Ability to work at the boundary between hardware and algorithms: measure reality, communicate constraints, and help close gaps vs simulation. High agency and practicality: able to set up experiments, get trustworthy data, and unblock others on a lean team. Useful experience Analog/mixed-signal, or high-speed data capture experience; strong instincts for instrumentation and noise/debugging. Ultrasound or acoustic sensor handling: hydrophone calibration and field mapping, transducer impedance characterization, element-level sensitivity

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team OpenAI is building the infrastructure foundation for the next generation of AI. The Data Center Engineering team defines the strategy, reference architectures, technical requirements, and delivery standards for the large-scale data centers that support OpenAI research, products, and infrastructure partners. As a Data Center Infrastructure Electrical Engineer, you will help define, validate, and scale the electrical power systems that support high-density AI compute. You will translate evolving compute requirements into practical facility and rack-power architectures, evaluate new technologies and vendor solutions, and drive technical decisions across design, manufacturing validation, construction, commissioning, deployment, and operations. This role is best suited for a senior hands-on engineer with deep experience in mission-critical power systems, strong judgment under ambiguity, and the ability to connect facility infrastructure, hardware requirements, controls, telemetry, reliability, and operations. About the Role We are seeking a senior electrical infrastructure engineer to lead the development of reliable, scalable, and efficient power architectures for high-density, liquid-cooled AI data centers. The ideal candidate has strong practical experience with critical electrical systems at data centers or comparable industrial scale, including medium-voltage and low-voltage distribution, utility interfaces, backup power, UPS and battery systems, rack power delivery, grounding, protection, controls, and monitoring systems. You should be comfortable moving between long-range architecture, detailed engineering review, lab validation, vendor qualification, field deployment, and operational troubleshooting. Key Responsibilities Design and optimize electrical topologies and equipment strategies that reduce cost, accelerate schedules, improve efficiency, increase scalability, and maintain high reliability and maintainability. Review and develop basis-of-des

About the Team OpenAI, in close collaboration with our capital partners, is embarking on a journey to build the world’s most advanced AI infrastructure ecosystem. This team is central to this mission, setting the core infra strategy and implementing this vision. From site selection to the buildout process, this team sits at the intersection of commercial, technical, strategy, and operations, interacting with teams and executives inside and outside of OpenAI. About the Role We are seeking experienced Data Center Electrical Design Engineers with expertise in designing, operating, and maintaining large-scale data center campuses. The ideal candidate for this role will have extensive background and experience in design and managing critical equipment and facilities, design and operation of MEP (Mechanical, Electrical, Plumbing) systems, and overseeing operational activities from initial phases of Data Center build through delivery and ongoing maintenance. The ideal candidate will have a strong technical background, operational leadership experience, and a proven ability to collaborate with external vendors on critical infrastructure. This role offers the opportunity to lead transformative data center projects with high visibility and impact. If you are passionate about delivering cutting-edge infrastructure solutions, we encourage you to apply. Key Responsibilities Oversee building and MEP design, operation, and maintenance, including reviewing building and MEP drawings and proposals across all project phases. Lead operational activities for large-scale data center campuses, from early design phases through delivery and daily operation. Operate and maintain critical data center facilities and equipment, ensuring reliability and performance. Collaborate with external vendors to select, procure, and manage critical equipment, such as generators, UPS, chillers, and CDUs. Provide technical expertise on all aspects of data center building, equipment, and operational systems,