Electrical Engineer

About the Role Systems Technology, Inc. (STI) is seeking an Embedded Software Engineer - UAS to join our Aerospace division, supporting flight software development for next-generation UAS and counter-UAS platforms. You'll work at the intersection of guidance, navigation, and control (GNC) software and the embedded hardware it runs on — writing, testing, and debugging flight-critical code for fault-tolerant flight controllers and mission systems. This is hands-on work: you'll be as comfortable on an oscilloscope bench as you are in a debugger. What You'll Do Design, implement, and test embedded C/C++ software for flight control and mission computer systems Develop and debug low-level drivers and communication interfaces (CAN, SPI, I2C, UART, PWM) between flight controllers, sensors, and actuators Support bring-up, integration, and troubleshooting of embedded hardware alongside electrical and mechanical engineers Contribute to software architecture for fault-tolerant, dual-core flight control systems Participate in flight testing, telemetry analysis, and post-flight debugging Collaborate with GNC engineers to translate control algorithms into deployable flight code Maintain code quality through version control, code review, and structured testing practices Minimum Qualifications 3–5 years of professional software development experience Proficiency in C and/or C++ Strong problem-solving, analysis, and debugging skills U.S. Person status required, as defined by ITAR (22 CFR 120.15), due to the export-controlled nature of this work This is an on-site position based in Hawthorne / Los Angeles, CA; remote or hybrid work is not available Preferred Qualifications Experience with UAS, UAVs, drones, or RC aircraft Experience developing software for embedded systems or microcontrollers Familiarity with embedded communication protocols such as CAN, SPI, I2C, UART, or PWM Familiarity with Git and modern software development practices Familiarity with debugging tools such as logic

Job Description Leidos is seeking an Electrical Engineer to lead cutting-edge engineering efforts within the Undersea Systems Division . This role is a unique opportunity to support underwater vehicle systems, maritime sensors, subsea telemetry, and ISR solutions in support of critical defense and national security missions. You'll be an engineer supporting a multidisciplinary team developing and supporting customers with advanced maritime technologies, from production processes to prototype design . Leidos’ Undersea Systems Division is a recognized leader in undersea technologies , delivering innovative, mission-critical solutions across sensor networks, unmanned systems, and tactical platforms . We’re known for achieving “industry firsts” in the most challenging maritime domains, as well as supporting well-developed processes and procedures to support excellence in execution for our customers. </p

1418 Graphcore is a globally recognised leader in Artificial Intelligence computing systems. The company designs advanced semiconductors and data centre hardware that provide the specialised processing power needed to drive AI innovation, while delivering the efficiency required to support its broader adoption. As part of the SoftBank Group, Graphcore is a member of an elite family of companies responsible for some of the world’s most transformative technologies. We are opening a new AI Engineering Campus in Austin, which will play a central role in Graphcore's work building the future of AI computing. The Electrical Engineer will play a pivotal role in designing innovative hardware systems for AI/ML applications. We are seeking a motivated Electrical Engineer with 2–4 years of experience in schematic capture, PCB design, and server hardware development. This role includes close collaboration with multiple partners to drive designs from concept through mass production. The ideal candidate is comfortable working across organizational boundaries, ensuring design quality, manufacturability, and on-time delivery in a fast-paced environment. Responsibilities: Develop and maintain electrical schematics for various printed circuit assemblies Design and layout multilayer PCBs Work closely with partners to review designs, provide technical guidance, and ensure alignment with system requirements Drive design for manufacturability (DFM), design for assembly (DFA), and design for testability (DFT) Support server subsystem integration Participate in design reviews Support prototype builds, board bring-up, debugging, and validation Track and resolve design issues, including root cause analysis and corrective actions Ensure proper documentation, revision control, and engineering change management (ECO/ECN processes) Requirements: Bachelor’s degree in electrical engineering 2–4 years of experience in schematic capture and PCB design

The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. SUMMARY The Electrical Engineer's responsibilities include providing technical guidance for production troubleshooting. The following job description represents a multi-skilled job classification of an Electrical Engineer. ESSENTIAL FUNCTIONS: • Hands-on Update firmware onto coach and bus, electrical repair or assembly experience • Understanding of electronics and their relationship to software, firmware. • Read and create wiring diagram and schematics use AutoCAD. • Work with vendors to find solutions and suitable products • Communicate with other team members to coordinate the following projects • Work on the improvement and development of electrical vehicles • Develop specifications and test requirements for product design. • Analyze design reliability, serviceability and manufacturability. • Perform engineering duties at customer sites, or off site when required. • Create BOM and oversee creation of drawings to support new design. • If needed, be able to travel to customer’s site for troubleshooting • Provide support to other departments such as Manufacturing, Quality Assurance, and Customer Service. •Recommend improvements to engineering policies and establish new procedures as needed. •Drive continuous improvement to electrical best practices by evaluating industry tools and techniques, collaborating with the Electrical and Software Engineering team to discuss implementation. •Maintain an awareness of how assigned tasks impact schedule, scope, budget, and quality at every st

About the Team DoorDash Labs, established in 2018, serves as the innovation hub for DoorDash, focusing on developing automation and robotics solutions to enhance last-mile logistics. The team's mission is to create technologies that support and augment human networks, aiming to improve efficiency for Dashers, merchants, and consumers alike. We’re ruthlessly focused on business impact. We are a highly senior team composed of former pioneers from a variety of different robotics industries. As of 2025, DoorDash has completed 10B lifetime deliveries. We’re focused on how to do the next 10B even better. About the Role We’re looking for a Senior/Staff electrical and firmware engineer who designs the board and writes the firmware for connected consumer and enterprise devices, including tablets, POS systems, peripherals, and emerging robotics applications. In this role, you will take connected devices from ambiguous user or business needs through system architecture, rapid prototyping, board design, firmware implementation, bring-up, field deployment, and production transition. The ideal candidate has a passion for building and shipping reliable hardware at scale and thrives in an environment that demands technical depth and high-quality execution across multiple concurrent programs. This is a build-heavy role on a small, senior team. You’re excited about this opportunity because you will… Own connected devices end to end, including: Own connected devices from an ambiguous product need through field deployment. Work across the hardware and firmware boundary instead of handing work between specialists. Explore uncertain product ideas through rapid prototypes and experiments. Make consequential tradeoffs on a small, senior team with direct exposure to users and field behavior. Key Responsibilities Translate user and business needs into an integrated electrical and firmware architecture. Design compute-based, mixed-signal boards incorporating processors

About the Team DoorDash Labs, established in 2018, serves as the innovation hub for DoorDash, focusing on developing automation and robotics solutions to enhance last-mile logistics. The team's mission is to create technologies that support and augment human networks, aiming to improve efficiency for Dashers, merchants, and consumers alike. We’re ruthlessly focused on business impact. We are a highly senior team composed of former pioneers from a variety of different robotics industries. As of 2025, DoorDash has completed 10B lifetime deliveries. We’re focused on how to do the next 10B even better. About the Role We’re looking for a Senior/Staff electrical and firmware engineer who designs the board and writes the firmware for connected consumer and enterprise devices, including tablets, POS systems, peripherals, and emerging robotics applications. In this role, you will take connected devices from ambiguous user or business needs through system architecture, rapid prototyping, board design, firmware implementation, bring-up, field deployment, and production transition. The ideal candidate has a passion for building and shipping reliable hardware at scale and thrives in an environment that demands technical depth and high-quality execution across multiple concurrent programs. This is a build-heavy role on a small, senior team. You’re excited about this opportunity because you will… Own connected devices end to end, including: Own connected devices from an ambiguous product need through field deployment. Work across the hardware and firmware boundary instead of handing work between specialists. Explore uncertain product ideas through rapid prototypes and experiments. Make consequential tradeoffs on a small, senior team with direct exposure to users and field behavior. Key Responsibilities Translate user and business needs into an integrated electrical and firmware architecture. Design compute-based, mixed-signal boards incorporating processors