Mechanical Engineer, Soft Goods Design

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design, build, and own the mechanical side of our robotic actuator dynamometer and test infrastructure. You will create the test stands, couplings, fixtures, load paths, guarding, and serviceable lab hardware that enable rigorous characterization of robotic actuators. This role combines precision mechanical design with hands-on lab work. You will take robotic actuator test infrastructure from requirements and analysis through CAD, fabrication, assembly, commissioning, and iteration, partnering closely with electrical and software engineers to deliver safe, flexible, high-uptime test cells. In this role, you will Own the mechanical architecture of dynamometer and actuator test cells, including frames, bases, load paths, alignment, guarding, and serviceability. Design dynamometer structures, robotic actuator fixtures, load-motor mounts, couplings, shafts, bearings, adapters, and torque-reaction hardware. Translate robotic actuator test requirements into robust mechanical systems for torque, speed, thermal, durability, backdrive, efficiency, and failure testing. Perform first-principles analysis and simulation for stiffness, strength, fatigue, vibration, thermal growth, critical speed, and safety factors. Create precise, repeatable alignment strategies that protect test articles, load machines, sensors, and couplings. Design modular fixturing that supports rapid changeover across actuator and motor variants without compromising measurement quality. Work closely with electrical engineers on cable routing

About the Team OpenAI’s Hardware organization develops silicon and system-level solutions designed for the unique demands of advanced AI workloads. The team is responsible for building the next generation of AI-native silicon while working closely with software and research partners to co-design hardware tightly integrated with AI models. In addition to delivering production-grade silicon for OpenAI’s supercomputing infrastructure, the team also creates custom design tools and methodologies that accelerate innovation and enable hardware optimized specifically for AI. About the Role We are looking for an experienced Mechanical Engineer with 7+ years of experience in design of IT hardware from chip/package to system levels. You’ll work alongside experts in thermal, mechanical, electrical, software, and systems engineering to support the design, analysis, and validation of mechanical and thermal systems that ensure the reliability, efficiency, and longevity of mission-critical hardware. This position requires strong analytical skills, hands-on testing experience, and the ability to work in a fast-paced, cross-disciplinary environment. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Lead mechanical design for AI supercomputer product in the data center application Collaborate with the cross functional team to design and optimize thermal solutions for data center hardware, including chips, power modules, and system-level cooling architectures Collaborate with cross-functional teams to integrate thermal management strategies into hardware design, from concept to mass production Design and validate mechanical systems, including chassis, enclosures, cooling systems, and high-power connections, ensuring alignment with performance and reliability standards. Perform 3D modeling, FEA, tolerance analysis, and prototyping, ensuring manufacturability and a

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

We're looking for a Senior Mechanical Engineer for Midjourney Medical — from precision electromechanical assemblies up to the large-scale structures and mechanisms that hold everything together and make it move. This role spans the full range of scale: one week you might be refining a compact transducer mount, the next you're architecting a structural frame or designing the motion system that positions hardware within it. This is a hands-on role on a small cross-functional team. You'll take problems from whiteboard sketch to working hardware yourself — designing in CAD, prototyping in the shop, testing, iterating, and integrating with research teams, electrical and software engineers along the way. We move fast and expect you to drive your own work: identifying what needs to happen next, making sound engineering calls without waiting for permission, and shipping hardware that works. What you'll do Own parts of the mechanical systems end to end — structures, mechanisms, and electromechanical integration Design large-scale structures: frames, weldments, enclosures, and support systems, with attention to stiffness, weight, manufacturability, and serviceability Design mechanisms: linkages, motion stages, actuation systems for precise, reliable positioning and articulation Integrate transducers, electronics, cabling, and thermal management into large physical systems Perform engineering analysis (tolerance stack-ups, structural/FEA, mechanism kinematics) to de-risk designs before committing to hardware Build and test relentlessly — 3D printing, rapid prototyping, and hands-on fabrication are core to how you'll validate designs Select parts and materials for system-level integration, balancing performance, cost, and lead time Drive projects independently from concept through validation, and collaborate closely with a small cross-disciplinary team to hit project goals What we're looking for Bachelor's degree in Mechanical Engineering or a related field 5+ years of experien