Firmware Validation And Integration Engineer Jobs

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team DoorDash Labs is an independent team within DoorDash. We explore robotics and automation to transform last mile logistics in the long term. If you have a passion for applying robotics solutions in a service used by millions of people, then we want to talk to you! About the Role We are hiring a Firmware Validation & Integration Engineer for our autonomy software team. This is a critical role to build robust and scalable validation for our firmware and systems to ensure reliability at every level. In this role, you will work with our electrical, firmware, and autonomy engineers to build the infrastructure and test suites required to validate the system. This includes designing and implementing our Hardware-in-the-Loop (HIL) simulation environments and automation frameworks from the ground up. You will report to the Autonomy Platform Lead on our Autonomy Platform Team at DoorDash Labs. We expect this role to be hybrid with some time in-office and some time remote. You’re excited about this opportunity because you will… Play an integral role on a small and focused team. Design and build Hardware-in-the-Loop (HIL) systems to simulate vehicle dynamics and sensor data for comprehensive firmware and system-level validation. Develop automated test infrastructure and software tools to exercise multiple embedded platforms throughout our robot system. Interface many layers of our control system including vehicle controls, power management, and motion control to ensure seamless system integration. Implement low-level test sequences and validation algorithms to safely stress-test vehicle components such as batteries, drive-train, and thermal management devices. Collaborate with cross-functional teams to identify edge cases and hardware-software corner cases that impact vehicle safety and performance. We’re excited about you because… BS/MS degree in Computer Science, Robotics, Electrical Engineering, or related technical field. 5+ years of experience in validati

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About us Graphcore is one of the world’s leading innovators in Artificial Intelligence compute. It is developing hardware, software and systems infrastructure that will unlock the next generation of AI breakthroughs and power the widespread adoption of AI solutions across every industry. As part of the SoftBank Group, Graphcore is a member of a best-in-class family of companies responsible for some of the world’s most transformative technologies. Together, they share a bold vision: to enable Artificial Super Intelligence and ensure its benefits are accessible to everyone. Graphcore’s teams are drawn from a diverse group of backgrounds and bring a broad range of skills and perspectives. A melting pot of AI research specialists, silicon designers, software engineers and systems architects, Graphcore enjoys a culture of continuous learning and constant innovation. Job Summary We are seeking a senior validation lead engineer to lead at-scale rack validation efforts for next-generation AI hyperscale systems. This role focuses on post-silicon system validation across the full lifecycle, ensuring functional, electrical, and thermal performance meets product objectives. You will own end-to-end blade and rack validation including planning, development, execution, and debug while collaborating across firmware, systems, and hardware teams. The Team The Rack Validation team is responsible for ensuring system readiness and quality at scale. The team works cross-functionally with firmware, silicon, and system engineering teams to validate complex AI compute platforms. Responsibilities and Duties Lead post-silicon validation of AI compute blades and racks including test planning, development, and automation. Drive provisioning and integration of system components (SoC FW, BMC, RMC, OS) for rack-level readiness. Own execution against program achievements and report validation progress and risks. Triage test failures, collect debug data, and collaborate on root cause analysis. Track

About the Team DoorDash Labs is an independent team within DoorDash. We explore robotics and automation to transform last mile logistics in the long term. If you have a passion for applying robotics solutions in a service used by millions of people, then we want to talk to you! About the Role We are hiring a Software Integration Engineer for our Platform Integration team. This is a critical role with impact across the robot lifecycle, from manufacturing to daily operation. The Platform Integration team owns making sure the robot works as one cohesive system. The focus is on the interfaces between subsystems; this role in particular is focused on the software side handling interaction between: OS & software stack; firmware; networking; timing; and calibration. In this role, you will work cross functionally with our electrical, hardware, firmware, and autonomy engineers to support new functionality both in both hardware and software. This includes creating provisioning tools, functional tests, and supporting integration into the autonomy software stack. You will report to the Autonomy Platform Lead on our Autonomy Platform Team at DoorDash Labs. We expect this role to be hybrid with some time in-office and some time remote. You’re excited about this opportunity because you will… Play an integral role on a small and focused team. Lead system-level debug when an issue crosses subsystem boundaries or no single team can isolate it. Support early integration of new sensor and software component designs by identifying interface requirements, risks, dependencies and required checks. Design and maintain integration tests, test setups, and procedures to ensure subsystems, once combined, satisfy requirements and design intent. Build and maintain the mission-readiness checks used before manufacturing signoff, validation, field testing, or mission use for different robot platforms. Create the tools, checks, and debug guidance that Manufacturing Integration, Validation,

We are looking for a disciplined and dynamic, Lead System Engineer – compute blade and rack Validation to join our growing compute rack validation team. As a diligent leader in Systems Engineering, you will drive multiple aspects of validation throughout the life cycle of the program. In this high visibility position, you will be part of a leading team to innovate and improve system bring-up and enablement abilities, as well as silicon and system validation to deliver the highest quality, industry leading technologies to market. Your technical leadership skills, validation and debug expertise will be necessary towards product development, definition, root cause and resolution. Your agility and collaborative approach will be essential to work within System Validation & other engineering teams (System Architects, SoC and Rack FW etc). The technical leader will be driving keys areas of system validation including leading first silicon & system bring-up (nodes and rack level systems) - rack level systems and blades will be based of ARM server architecture. Candidate will be immersed in challenging system enablement work, system validation (end-to-end) methodology, tests development and execution as well as triage/debug of critical issues to meet critical program milestones at POR quality. The candidate will also be a key contributor to state-of-the-art HW and lab capabilities for Grapchore’s system engineering. The candidate should be able to work in a global environment while maintaining a synergetic culture. Primary Responsibilities: Lead the systemenablement (including first silicon and other FW components) to ensure system capabilities are brought up as per plan of record and system architecture spec. Drive organization wide methodology for Firmware integration and best known configuration (HW/FW/SW) usage model by leading the release of deployment ready solutions. Develop key methodologies, lab HW and system SW capabilit

1743 - This position is in Austin, Texas. Position Summary We are seeking an experienced Board-Level Hardware Validation Engineer to define and execute the validation and verification of complex electronic systems throughout the product lifecycle. This role is responsible for defining validation strategies, developing test plans, executing hands-on testing, analyzing failures, and working directly with ODM partners to ensure products meet performance, reliability, quality, and compliance requirements before mass production. The ideal candidate combines strong electrical engineering fundamentals with practical lab expertise and is comfortable personally performing validation activities while coordinating with cross-functional teams and manufacturing partners. Key Responsibilities Validation Strategy & Planning Define comprehensive board-level and inter-board validation plans based on product requirements, design specifications, and customer use cases. Develop validation methodologies covering functional, electrical, thermal, power, signal integrity, reliability, and stress testing. Establish test coverage, acceptance criteria, qualification requirements, and release gates. Review hardware architecture, schematics, component specifications, and interface topologies to identify validation risks early in the design cycle. Define incremental validation and regression coverage for component substitutions, design changes, and firmware updates. Hands-On Validation Execution Develop, automate, and execute validation tests on prototype and production-intent hardware. Perform board bring-up, functional verification, electrical characterization, and system-level integration testing. Validate communication interfaces, control signals, and timing requirements. Verify power sequencing, reset behavior, leakage current, and recovery across operating states. Execute temperature and voltage corner testing against approved operating limits. Use oscilloscopes, logic an

EnCharge AI is a leader in advanced AI hardware and software systems for edge-to-cloud computing. EnCharge’s robust and scalable next-generation in-memory computing technology provides orders-of-magnitude higher compute efficiency and density compared to today’s best-in-class solutions. The high-performance architecture is coupled with seamless software integration and will enable the immense potential of AI to be accessible in power, energy, and space constrained applications. EnCharge AI launched in 2022 and is led by veteran technologists with backgrounds in semiconductor design and AI systems. Senior Emulation Engineer Location: India - Remote Job Description: At EnCharge AI, we are building the next generation of AI compute silicon — purpose-built for high-performance, low-power, and scalable AI inference. As an Emulation Engineer, you will play a critical role in validating complex AI accelerator architectures on emulation platforms before tape-out. This position is ideal for someone passionate about bridging the gap between hardware and software in fast-paced, deep tech environments. Responsibilities: • Set up and maintain Siemens Veloce emulation and prototyping platforms • Adapt SoC designs for Emulation and Prototyping • Develop and debug emulation testbenches and system-level environments • Support pre-silicon validation, power/performance analysis, and early software bring-up. Participate in silicon bring-up and validation. • Collaborate with design and verification teams to isolate design issues and accelerate debug. • Optimize performance of the emulation workloads and reduce turnaround time. • Work with firmware/software teams to enable use of emulators for OS and driver testing. Required Background: • BS/MS/Ph.D. in EE, CS, or related field with 7+ years of SoC design experience. • Experience with emulation platforms (Veloce, Palladium, or ZeBu) and FPGA-based prototyping systems (proFPGA, HAPS, or Protium) • Experience with emula

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role You will work on the systems software strategy and execution that brings new AI silicon from first power-on to a fully integrated system running production-representative models at expected functionality and performance. You will define how software exercises and validates compute, memory, interconnect, and I/O subsystems, then build the diagnostics, automation, and observability needed to find issues quickly. This role sits at the center of silicon, firmware, platform, systems, and workload teams. You will turn hardware specifications and performance targets into an end-to-end bringup plan, drive cross-functional debug, and establish the stress and regression infrastructure that makes each new platform reliable across operating environments. In this role, you will: Contribute to the end-to-end software bringup and validation strategy for new silicon and first-party systems. Define software-driven test coverage across compute, memory, interconnect, I/O, and their system-level interactions. Build diagnostics, test automation, telemetry, and regression infrastructure that accelerate first-silicon learning and issue isolation. Lead bringup from initial silicon arrival through board and system integration, docking, runtime enablement, and model execution. Design stress tests that characterize reliability, performance, and stability across workloads and operating conditions. Translate architecture specifications and performance models into measurable acceptance crit

ABOUT PELOTON At Peloton, We empower people to live fit, strong, long, and happy lives. We use technology and world-class instruction to connect the world through fitness, empowering people to be the best version of themselves anywhere, anytime. We're a team of talented and passionate individuals who are committed to innovation and creating exceptional user experiences. We are seeking a highly motivated and skilled Senior Electrical Engineer to join our Hardware Engineering team and contribute to the next generation of connected fitness products. YOUR DAILY IMPACT AT PELOTON Design and develop electrical systems and circuits for new and existing Peloton products, including consumer electronics, motor controls, power supplies, and sensor integration Conduct rigorous testing and validation of electrical designs to ensure they meet performance, reliability, and safety standards (e.g., UL, CE, FCC). This involves debugging hardware, analyzing test data, and implementing design changes as needed Work closely with cross-functional teams, including mechanical engineering, firmware, software, and industrial design, to integrate electrical systems seamlessly into the final product Collaborate with our manufacturing partners to ensure designs are manufacturable, and provide support during production ramp-up Stay current with emerging technologies and industry trends to drive innovation and continuous improvement in our products YOU BRING TO PELOTON A Bachelor's degree in Electrical Engineering or a related field. A Master's degree is a plus 5+ years of experience in electrical engineering, with a strong background in power systems, power supplies, and consumer electronics development Deep understanding of power systems, AC and DC motors, and line-connected appliance designs Strong experience in both internal and joint development work, working with overseas JDM and CM partners Understanding of regulatory requirements, including design for UL and CE safety and EMC requirements

About us Graphcore is one of the world’s leading innovators in Artificial Intelligence compute. It is developing hardware, software and systems infrastructure that will unlock the next generation of AI breakthroughs and power the widespread adoption of AI solutions across every industry. As part of the SoftBank Group, Graphcore is a member of an elite family of companies responsible for some of the world’s most transformative technologies. Together, they share a bold vision: to enable Artificial Super Intelligence and ensure its benefits are accessible to everyone. Graphcore’s teams are drawn from diverse backgrounds and bring a broad range of skills and perspectives. A melting pot of AI research specialists, silicon designers, software engineers and systems architects, Graphcore enjoys a culture of continuous learning and constant innovation. About the Role We are looking for Staff System Software Engineer in Test to join our team. In this role, you will be responsible for design, development, automation and reporting of Integration and system tests spanning across firmware and device drivers. This role requires you to have significant technical breadth and deep understanding of low-level system software specifically in server class systems. You will be part of a new team responsible for integration of different system software deliverables and development of system tests spanning all the components. You will contribute to shaping the test strategy , guide best practices and solve complex problems while maintaining a strong hands-on focus. You will partner with development and other QA teams to deliver high quality scalable and reliable solutions. About the Team Integration and system test team is responsible for verification and validation of integrated components across Board management controller (BMC), Firmware and Linux device driver. The team is also responsible for management and maintenance of common tools and pipel

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.

Who We Are Nuro believes self-driving vehicles are the most immediate and profound opportunity for AI to drive positive change in the physical world. Safer streets, more time for what matters, and easier access to the world around us, that’s why we’re building a universal autonomy platform: self-driving for all roads and all rides. Founded in 2016, Nuro is a physical AI company developing Level 4 autonomous driving technology for a wide range of vehicles, use cases, and markets. Powered by the Nuro Driver™, our universal autonomy platform enables the global mobility ecosystem to deploy autonomy at scale, from robotaxis and logistics fleets to personal vehicles. With years of real-world deployment experience and a flexible, partner-led business model, Nuro is working toward a future where millions of autonomous vehicles powered by our technology help make everyday life safer, easier, and more connected. Nuro has raised over $2B in capital from Uber, NVIDIA, Google, Softbank, Fidelity, T. Rowe Price, and other leading investors. About the Role Build and evolve our automated hardware-in-the-loop (HIL) validation framework used for ADAS/autonomous driving ECU and system testing. Translate formal validation requirements into repeatable automated test cases covering nominal operation, fault handling, timing, communication integrity, and safety-related behavior. Execute and debug validation on HIL benches using vehicle network interfaces, embedded target access, fault injection, and system emulation. Partner with firmware, systems, and validation teams to define test coverage, investigate failures, and improve release readiness. Support automated regression and release testing, including pre-test firmware deployment, orchestrated test execution, and structured result reporting. Build/Maintain shared framework components as new vehicle platforms, ECU releases, and validation domains are added. About the Work Practical experience with HIL/bench hardware integration (po

Manufacturing Test Engineering Manager Position Summary We are seeking an experienced Manufacturing Test Engineering Manager to lead the development and execution of the end-to-end manufacturing test strategy for next-generation AI server platforms and datacenter infrastructure. This role is responsible for defining and driving the manufacturing test architecture from L6 board assembly through L11 rack-level integration and final system validation , ensuring world-class product quality, manufacturability, and production scalability. This leader will manage a team of 3–5 Manufacturing Test Engineers while partnering closely with Hardware, Firmware, Platform, Validation, Quality, Operations, and Joint Design Manufacturing (JDM) partners. The role owns the manufacturing test strategy, test coverage, factory test infrastructure, manufacturing capacity planning, and continuous improvement of manufacturing quality. Key Responsibilities Manufacturing Test Strategy Define and own the end-to-end manufacturing test strategy from L6 board assembly through L11 rack integration . Develop standardized manufacturing test methodologies that optimize quality, throughput, cost of test, and scalability across multiple products and JDM sites. Establish manufacturing test standards, best practices, and engineering processes that support high-volume server manufacturing. Technical Leadership & People Management Lead, mentor, and develop a team of 3–5 Manufacturing Test Engineers supporting multiple hardware programs. Establish team priorities, allocate resources, and ensure successful execution of manufacturing test deliverables. Foster a culture of technical excellence, accountability, collaboration, and continuous improvement. Serve as the primary technical escalation point for manufacturing test and production issues. Cross-Functional Engineering Collaboration Partner with Hardware, Platform, Firmware, Validation, Reliability, Quality, and Operations teams to ensure manufac