Lead Development Engineer 4 Rdkv Cpp Specialist Specialist in United States

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. The Site Inventory Control (SIC) team is at the forefront of our ambitious expansion efforts. SIC plays a pivotal role in connecting wafer starts, inventory strategy, cycle time management, output delivery, and factory execution. As a Senior Engineer for Fab 4 HVM SIC, you will be the operational hub, driving alignment between Technology Development (TD), High Volume Manufacturing (HVM), Probe, Supply Chain, Planning, and Engineering organizations. This outstanding opportunity allows you to lead the charge in optimizing inventory and cycle time performance while ensuring flawless factory execution! We are looking for individuals who thrive on collaboration and tackling complex operational challenges. You'll have the chance to bring to bear data to drive decisions and implement AI-enabled solutions to improve speed, accuracy, and decision-making. Responsibilities: Lead multi-functional initiatives for wafer starts, inventory, cycle time, and output performance to support business commitments Develop and improve inventory control methodologies, business processes, and operational metrics and recommend corrective actions Develop and implement inventory, priority, and capacity strategies for New Product Introduction (NPI) programs Foster coordination between Technology Development, High Volume Manufacturing, Supply Chain, Planning, and Engineering teams to optimize inventory positions and factory flow Identify and mitigate constraints, risks, and op

Lead Systems Engineer - Phantom Works Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Lead Systems Engineer (Level 4) to support the Space Battle Management, Command and Control (SBMC2) programs in Colorado Springs, CO or Berkeley, MO . The Systems Engineer will perform as part of a high-performing team and have the opportunity to contribute to the development and delivery of innovative software solutions in an agile software development environment interfacing with internal and external stakeholders; to include a Joint Industry partnership Team (JIPT) and Working Groups, contributing to the design and development of next generation ground command and control capabilities. As a member of the Boeing team, you will be responsible for key portions of our development lifecycle, from idea creation and development, all the way through to maintenance and support of the customer’s delivered system. More importantly, you will have the opportunity to make an impact on the results of our projects. We offer a collaborative mentoring environment where you have the opportunity to learn from others and be a mentor to others. Position Responsibilities Support definition of requirements, interfaces, and concept of operations through supporting and/or chairing working group meetings. Understand and communicate prioritization of efforts to multi-disciplinary team. Think abstractly and see the big picture while evaluating technical details Perform technical analyses to develop and validate models of system behavior; identify solutions to complex problems. Serve as a direct interface to both internal and external customers Conduct and support trade s

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Lead Robotics Safety Engineer to define and lead the product safety strategy for our robotics program. You will work closely with leadership, engineering, research, legal, and policy teams to ensure safety is integrated into our products from the earliest stages of development through deployment. This role combines product safety, regulatory strategy, systems engineering, and risk management. You will help shape how we think about safety across robotic platforms, influence product architecture and development decisions, and ensure our systems are designed to meet both current and emerging regulatory expectations. You will serve as a subject matter expert on robotics safety standards, regulatory frameworks, and safety engineering practices while helping establish the long-term safety strategy for our products and organization. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will Define and lead the product safety strategy for robotic systems across the development lifecycle. Monitor and influence emerging regulatory frameworks, industry standards, and policy developments relevant to robotics and autonomous systems. Partner with engineering teams to translate safety requirements into product architecture, design decisions, and engineering requirements. Develop and maintain system-level hazard analyses, risk assessments, and safety cases for robotic products. Establish safety requirements, verification strat

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

Overview: The Data Acquisition team within the Foundations organization at OpenAI is responsible for all aspects of data collection to support our model training operations. Our team manages web crawling and GPTBot services and works closely with Data Processing, Architecture, and Scaling teams. We are looking for a skilled Software Engineer to join our Data Acquisition team. Responsibilities: Own and lead engineering projects in the area of data acquisition including web crawling, data ingestion, and search. Collaborate with other sub-teams, such as Data Processing, Architecture, and Scaling, to ensure smooth data flow and system operability. Work closely with the legal team to handle any compliance or data privacy-related matters. Develop and deploy highly scalable distributed systems capable of handling petabytes of data. Architect and implement algorithms for data indexing and search capabilities. Build and maintain backend services for data storage, including work with key-value databases and synchronization. Deploy solutions in a Kubernetes Infrastructure-as-Code environment and perform routine system checks. Conduct and analyze experiments on data to provide insights into system performance. Qualifications: BS/MS/PhD in Computer Science or a related field. 4+ years of industry experience in software development. Experience with large web crawlers a plus Strong expertise in large stateful distributed systems and data processing. Proficiency in Kubernetes, and Infrastructure-as-Code concepts. Willingness and enthusiasm for trying new approaches and technologies. Ability to handle multiple tasks and adapt to changing priorities. Strong communication skills, both written and verbal. About OpenAI OpenAI is an AI research and deployment company dedicated to ensuring that general-purpose artificial intelligence benefits all of humanity. We push the boundaries of the capabilities of AI systems and seek to safely deploy them to the world through our products. AI is an

Replit is the agentic software creation platform that enables anyone to build applications using natural language. With millions of users worldwide, Replit is democratizing software development by removing traditional barriers to application creation. About the role: As a Staff Product Engineer at Replit, you’ll work closely with other product and platform engineers, designers, sales representative, and product managers to build features that help users collaborate with their team to go from idea to software fast. You’ll be at the forefront of shaping and experimenting on what our tens of millions of users love. You will: Help lead major projects and take new products from 0->1 Identify the hardest technical and/or quality problems holding us back, and then build solutions Chart high level technical direction and follow up to make sure those projects come together to deliver on results Mentor and develop new senior engineers to help grow the team Ship new features and build infrastructure using: TypeScript, React, CSS, GraphQL, Node.js, and Postgres Required skills and experience: A minimum of 7 years of professional software development experience Experience in a technical leadership role, working cross functionally Working experience building full stack applications with TypeScript Working experience building directly for users Bonus Points : You’re excited about the future of programming and have experience working with IDEs, terminals, or other common developer tools You’ve had previous experience working at a startup in a cross-functional engineering role This is a full-time role that can be held from our Foster City, CA office. The hybrid role has an in-office requirement of Monday, Wednesday, and Friday. Full-Time Employee Benefits Include: 💰 Competitive Salary & Equity 💹 401(k) Program with a 4% match ( US Only ) ⚕️ Health, Dental, Vision and Life Insurance 🩼 Short Term and Long Term Disability 🚼 Paid Parental, Medical, Caregiver Leave 🏝 Flexible

Senior Structural Analysis Engineer – Interiors Stress Company: The Boeing Company 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Interiors Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Aircraft Interiors products. Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. Leads development, integration and documentation of structural requirements to establish the Interior Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems an

Work Flexibility: Onsite Stryker is seeking a Staff Advanced Manufacturing, Automation/Software Engineer to join our Advanced Operations team, supporting the Medical Division - Acute Care Business Unit. In this role, you will lead the design, development, and deployment of advanced automation and production test systems for new product introductions. This role is critical to ensuring reliable, scalable, and compliant manufacturing for patient support and patient environment products. You will serve as both a technical owner and a supplier-facing leader, architecting systems internally while guiding external partners to deliver high‑quality automation solutions. You will have the opportunity to work on the design transfer of new products from research through development and into production. This is a hybrid role based out of Portage, MI. The team works onsite 4-5 days per week to support collaboration and project needs. What you will do: Automation System Architecture & Development Lead the full lifecycle of industrial automation and test systems from requirements, architecture, and design through implementation, validation, and release. Define system-level requirements encompassing mechanical, electrical, software, controls, and safety considerations. Develop and integrate control software, embedded interfaces, test sequences, and operator interfaces (HMI/SCADA). Ensure robust performance, maintainability, reliability, and alignment with design intent and manufacturing needs. Troubleshoot complex processes, software, and equipment issues; optimize system performance and uptime. Supplier & Equipment Vendor Leadership Manage automation and equipment suppliers, including capability assessments, technical reviews, process monitoring, and on‑site visits. Create clear, comprehensive

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

Lead Systems Integrator Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Lead Systems Integrator (Level 4) to support an Air Dominance Fixed Wing Proprietary Program in St. Louis, MO . Step into a fast-paced, cutting-edge program where your expertise will drive the design, integration, and testing of advanced, cloud-based systems that empower mission planning, debrief, and tactical Command & Control (C2) solutions for fixed-wing platforms. In this role, you will lead the development, analysis, and integration of innovative engineering solutions for critical Ground System capabilities and ensure seamless support for ground systems from initial design through to final delivery. You will partner closely with the team’s test lead as well as the overall chief integrator who oversees all activities related to design, integration, and test. You will work with a high-performing, cross-functional team in an agile environment, driving next-generation capabilities from design through delivery. This role offers the chance to innovate with open-architecture, model-based designs and collaborate across disciplines to support critical defense missions. You champion best practices, processes, and standards for the integration team, mentor systems and electrical engineers, and coach solution leads on execution. If you’re passionate about advancing mission-critical systems and thrive in a collaborative, fast-moving environment, this is your opportunity to make a significant impact. Position Responsibilities Lead team of systems and electrical engineers in behavior modeling and requirements decomposition for system, sub-system, and software design