Senior Platform Backend Developer Jobs

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a TPM to drive development and integration of a range of sensor systems for robotics. This role will drive cross-functional alignment across requirements, engineering design, integration, validation, manufacturing, supply chain, and release processes, helping turn complex sensor-system needs into clear plans, decisions, and milestones. Location and in-person expectations: This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive requirements alignment across engineering design, integration, testing, and validation for camera modules, LiDAR, IMUs, RADAR, proximity sensors, audio components and the systems they interact with. Coordinate the integration of modules including electrical, mechanical, harnessing, and software interfaces with the full robotic system with deep understanding of timelines to drive the respective PCBAs, enclosures, build and test fixtures, connectors and cables. Establish effective cadences for technical reviews, BOM readiness, change management, production releases, approvals, and decision tracking. Align harnesses, fasteners, assembly fixtures, test fixtures, and documentation so cross-functional teams can execute against a clear plan. Lead validation planning around functional, reliability, NVH failure modes, including testing needs, schedules, and exit criteria. Partner with manufacturing and supply chain to manage handoffs, lead times, dependencies, and production readiness. Drive tradeoff decisions across cost, qua

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

Principal Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is seeking a Principal Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 6) for a satellite development program in Huntington Beach or El Segundo, California. This position will lead a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Drives technical excellence throughout all Optical Sensor development activities Troubleshoots sensor design and integration issues with the telescope and sensor focal plane Provides technical leadership to SMS and BTI sensor teams Serves as the primary technical interface with the EO/IR suppliers Provides oversight and approval of technical approaches, products and processes. Works closely with program manager, program chief engineer, and other Boeing teams Ensure mission success and prompt resolution of anomalies Provides mentoring and coaching to Optical Sensor Engineers and Technicians Performs Technical Lead Engi

Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 3) to join our team in Huntington Beach or El Segundo, California. This position will be joining a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures Develops architectures to integrate systems and components into higher level systems and platforms Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements Defines and conducts tests to validate performance of designs to requirements Manages appropriate aspe

Instawork is on a mission to create meaningful economic opportunities for skilled hourly professionals in communities around the globe. Our AI-powered labor marketplace helps local businesses scale, and enables global technology companies to push the frontiers of robotics and AI. Backed by world-class investors like Benchmark, Spark Capital, Craft Ventures, Greylock, Y Combinator, and others, we’re looking for exceptional talent to reimagine the way the world works. Location : Bengaluru (On-site) + multi-city coordination Instawork Robotics Lab (IRL) Robots are getting smarter, but they still can’t reliably do the everyday physical tasks people do — chopping vegetables, stocking shelves, assembling parts. The bottleneck is data. UC Berkeley’s Prof. Ken Goldberg calls it the “100,000-year data gap”: the chasm between the massive text datasets used to train language models and the tiny amount of real-world, physical-dexterity data available to train robots. The entire robotics industry collected only ~100,000 hours of training data in 2024 and ~1 million in 2025 — and even the ~20 million hours projected for 2026 is still less than 0.04% of what is ultimately needed. IRL exists to close that gap. Using Instacore — a wearable multi-camera and sensor system (head, chest, and wrist cameras plus IMUs and a compute pack) — our field teams capture synchronized, high-diversity egocentric data of real people doing real tasks across real commercial environments: kitchens, warehouses, hotels, retail, and light manufacturing. That data is quality-checked, anonymized, and delivered to the world’s leading robotics companies and foundation-model labs to teach robots how to operate in the messy physical world. In India, we run the on-ground engine of this mission — a growing fleet of Instacore rigs, Field Officers and Data Collectors, regional hubs, and the operations and finance backbone that keeps it

Instawork is on a mission to create meaningful economic opportunities for skilled hourly professionals in communities around the globe. Our AI-powered labor marketplace helps local businesses scale, and enables global technology companies to push the frontiers of robotics and AI. Backed by world-class investors like Benchmark, Spark Capital, Craft Ventures, Greylock, Y Combinator, and others, we’re looking for exceptional talent to reimagine the way the world works. Instawork Robotics Lab (IRL) Robots are getting smarter, but they still can’t reliably do the everyday physical tasks people do — chopping vegetables, stocking shelves, assembling parts. The bottleneck is data. UC Berkeley’s Prof. Ken Goldberg calls it the “100,000-year data gap”: the chasm between the massive text datasets used to train language models and the tiny amount of real-world, physical-dexterity data available to train robots. The entire robotics industry collected only ~100,000 hours of training data in 2024 and ~1 million in 2025 — and even the ~20 million hours projected for 2026 is still less than 0.04% of what is ultimately needed. IRL exists to close that gap. Using Instacore — a wearable multi-camera and sensor system (head, chest, and wrist cameras plus IMUs and a compute pack) — our field teams capture synchronized, high-diversity egocentric data of real people doing real tasks across real commercial environments: kitchens, warehouses, hotels, retail, and light manufacturing. That data is quality-checked, anonymized, and delivered to the world’s leading robotics companies and foundation-model labs to teach robots how to operate in the messy physical world. In India, we run the on-ground engine of this mission — a growing fleet of Instacore rigs, Field Officers and Data Collectors, regional hubs, and the operations and finance backbone that keeps it all running at quality and scale. Role Overview The Finance Associat

Ignite your curiosity. Solve the unsolvable. At Leidos, we do more than write code—we decode the unknown. Our San Diego-based research and engineering team takes on some of the nation’s toughest defense challenges using advanced signal processing, ocean remote sensing, and high-performance computing. We’re seeking a Software Engineer / Computer Scientist who enjoys solving complex problems and pushing the limits of performance. In this role, you’ll work alongside a multidisciplinary team of scientists and engineers with expertise in hydrodynamics, physics, acoustics, and signal processing to build impactful software that turns massive, complex data sets into meaningful insight. If you are motivated by innovation, energized by collaboration, and excited to see your work support real-world missions, this could be the right opportunity for you. What You’ll Do Collaborate with scientists and engineers to design, develop, and optimize advanced algorithms for next-generation radar, optical, and infrared sensor systems. Build scalable, high-performance backend systems for scientific computing in distributed environments. Integrate, refactor, and improve scientific codebases to increase efficiency and scalability. Translate and optimize existing code for GPU/CUDA acceleration and parallel or distributed execution. Test, document, maintain, and enhance complex software in Linux/Unix environments. Contribute in a collaborative environment that values technical excellence, creativity, and continuous growth. Required Qualifications Bachelor’s degree in Computer Science, Applied Mathematics, Physics, or a related field with 4+ years of backend software development experience, or a Master’s degree with 2+ years of experience. Equivalent experience may be considered in place of a degree. U.S. citizenship and the ability to obtain a Top Secret clearance; active Top Secret clea

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time. Company: Oak Street Health Title: Welcome Coordinator Location: 1113 Carlisle Rd, York, PA 17404 Role Description: Welcome Coordinators at Oak Street Health are the faces of our clinics, creating positive and lasting impressions on our patients and community members. They are the glue to our center operations, and help ensure a seamless, unmatched experience by performing high-touch tasks, such as scheduling, managing inbound and outbound phone calls, and performing daily administrative workflows, like mail and fax distribution. Oak Street Health provides care to older adults and seniors, with a mission to rebuild healthcare as it should be. Successful Welcome Coordinators help create a welcoming and inclusive environment for our patients, and exhibit high levels of flexibility, empathy, and compassion. They are responsible for delivering excellent administrative assistance to our patients and guests every day. Check out this pamphlet for a sneak peek into the life of an Oak Street Welcome Coordinator! Core Responsibilities: Welcoming patients and guests <l

Who We Are HP IQ is HP’s new AI innovation lab. Combining startup agility with HP’s global scale, we’re building intelligent technologies that redefine how the world works, creates, and collaborates. We’re assembling a diverse, world-class team—engineers, designers, researchers, and product minds—focused on creating an intelligent ecosystem across HP’s portfolio. Together, we’re developing intuitive, adaptive solutions that spark creativity, boost productivity, and make collaboration seamless. We create breakthrough solutions that make complex tasks feel effortless, teamwork more natural, and ideas more impactful—always with a human-centric mindset. By embedding AI advancements into every HP product and service, we’re expanding what’s possible for individuals, organisations, and the future of work. Join us as we reinvent work, so people everywhere can do their best work. About The Role As a Software Engineering Intern on the Systems team at HP IQ, you’ll work on low-level software that sits close to the hardware and helps power intelligent experiences across our products. This role is ideal for students who enjoy understanding how complex systems work under the hood. You’ll have the opportunity to work across multiple layers of the software stack, investigate performance bottlenecks, optimize system behavior, and build software that interacts closely with hardware and system resources. We’re looking for engineers who are curious about more than whether something works — you want to understand how it works, why it performs the way it does, and how to make it better. What You Might Do Build and optimize low-level systems software using languages such as C and C++. Investigate performance bottlenecks and improve the speed, efficiency, and reliability of existing systems. Work on data processing and sensor pipelines that connect software with underlying hardware. Analyze and improve memory usage, resource management, and system performance. Work across multiple lay

About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people’s lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 4,100 associates, the company’s products are sold at key retailers, online and offline, and through distributors around the world. AI at SharkNinja At SharkNinja, we’re building an AI-native culture. We’re not waiting for the future; we’re creating it. Our people are expected to experiment boldly, adopt new tools, and continuously raise what’s possible to create meaningful impact for our consumers. If you believe the best way to do your job hasn’t been invented yet, you’ll fit right in. About the Role: This role will focus on embedded firmware design and product development lifecycle for our ambitious product roadmap. The successful candidate will have experience in embedded firmware design, including 8-bit, 16-bit and 32-bit microcontrollers. Preferably in home appliance products or similar and would be familiar with all product development aspects such as best practice coding standards, heating control, motor control, sensor, inter-processor communications such as UART, I2C, SPI, WIFI and firmware/code verification systems. The successful candidate would have experience using analysis/measurement tools such as oscilloscopes, data loggers, DVM’s to debug embedded systems. This is where your SharkNinja journey begins. You’re an explorer—not a tour guide—driven by curiosity, fueled by taking chances, and unwilling to fly under the radar. Here, bold m

Want to be a bswifter? At bswift we’ve been transforming benefits administration since 1996, making it simpler, smarter, and more human. Our state-of-the-art, cloud-based technology and services empower employees to understand, manage, and love their benefits. From downtown Chicago, and remotely across the country, we serve thousands of companies and millions of people nationwide, reducing administrative burdens and freeing HR teams to focus on creating thriving, people-first workplaces. We’re looking for motivated and goal-driven individuals who share our passion for delivering excellence and creating solutions that make a difference. The reward is a fun, flexible and creative environment with ample opportunity for professional and personal growth. If you love the bswift values of pursue excellence, embrace accountability, deliver superior service, and be a great place to work, we want to hear from you! About the Role We are looking for an AI Engineer II to design, build, and deploy cutting-edge generative AI applications , including agentic workflows and intelligent chat experiences , that transform how employees interact with their benefits. This role goes beyond individual contribution—you will own complex AI features end-to-end , influence architecture decisions around LLMs and agent systems , and mentor junior engineers . You will play a key role in bringing secure, scalable, and high-performance AI solutions to production using AWS cloud technologies. You will collaborate closely with software engineers, architects, product managers, and cross-functional teams to deliver seamless and impactful user experiences Key Responsibilities 1. Solution Design & Development Lead the design and development of scalable, secure, and high-performance applications . Architect robust backend systems and integrate them with frontend applications and third-party services. Drive technical decisions and participate in design reviews alongside senio

At Freddie Mac, our mission of Making Home Possible is what motivates us, and it’s at the core of everything we do. Since our charter in 1970, we have made home possible for more than 90 million families across the country. Join an organization where your work contributes to a greater purpose. We are accepting applications for this position until 10/16/2026 Position Overview: The Multifamily Division within Freddie Mac is searching for curious, motivated, and collaborative individuals to support the division's objectives, projects, and strategic initiatives. Freddie Mac Multifamily is a dynamic organization that provides interns with meaningful opportunities to gain exposure across the business while developing both technical and professional skills. As a Multifamily Business Intern, you will work on real-world projects, interact with professionals across the organization, and develop a deeper understanding of the Multifamily housing finance industry. This internship offers an opportunity to build business acumen, strengthen communication skills, and gain experience working in a mission-driven organization that supports housing affordability nationwide. Our Impact: Freddie Mac Multifamily helps deliver an ample supply of affordable rental housing by purchasing mortgages secured by apartment buildings with five or more units. We provide liquidity to the multifamily housing market by purchasing loans from lenders nationwide and securitizing them to support continued housing finance availability. Our financing supports communities across the country—from large metropolitan areas to smaller markets—and serves a diverse population of renters, including students, working families, seniors, and underserved communities. Your Impact: Engage with team members across the organization to develop a broad understandi

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

What you’ll do Be the generalist EE for the scanner system: integration, bring-up, debugging, and making the electrical side of the device reliable and serviceable. Own ultrasound experimentations that feeds the image reconstruction team Design and execute experiment setups for transducer characterization (element sensitivity, bandwidth, cross-talk mapping, beam profile measurements) and ex vivo / phantom clinical testing. Acquire, process, and analyze RF and baseband signals for data quality assessment and benchmarking. Design simple boards and adapters as needed (monitoring, power/safety, interface/conditioning), and take them from prototype through a stable revision. Prototype quickly, then harden what works: wiring/harnessing, grounding, safety interlocks, and reliable integration across subsystems. Own practical test setups and documentation (fixtures, scripts, procedures) that make experiments repeatable and results comparable over time. What we’re looking for Strong hands-on EE background with experience building, debugging, and iterating on real systems in the lab. Solid understanding of signal processing fundamentals — knows what to measure, how to condition and digitize it, and how to evaluate signal quality in the context of an imaging system (SNR, bandwidth, dynamic range, artifacts). Comfortable spanning system integration + occasional design work (schematics/layout reviews or light PCB design) in a fast-moving environment. Ability to work at the boundary between hardware and algorithms: measure reality, communicate constraints, and help close gaps vs simulation. High agency and practicality: able to set up experiments, get trustworthy data, and unblock others on a lean team. Useful experience Analog/mixed-signal, or high-speed data capture experience; strong instincts for instrumentation and noise/debugging. Ultrasound or acoustic sensor handling: hydrophone calibration and field mapping, transducer impedance characterization, element-level sensitivity