Senior Test Validation Engineer Jobs

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Principal ASIC Design Engineer About the Role At Micron, we transform how the world uses information to enrich life for all. As a global leader in memory and storage innovation, we develop technologies that accelerate intelligence and enable the next era of AI, ML, and advanced computing. Micron’s Interface Pathfinding team drives performance-scaling innovation across circuits, signaling, packaging, and interconnects with a 3–5 year technology horizon. A core part of that work is silicon-based validation of novel PHY solutions, and we are growing the team to execute. As the Principal ASIC Design Engineer , you will be the primary digital contributor on a deliberately small, senior team — united around the goal of carrying high-speed interface technologies from architecture to tape-out. The team’s analog and chip-level architecture is anchored by a deeply experienced analog custom design engineer; your role is to be the authoritative digital voice — owning RTL design and micro-architecture of the digital blocks, defining timing constraints, supporting verification, and serving as the key interface between the digital design and the analog and layout specialists who will carry the implementation through to silicon. On a test ASIC of this scope, the front-end digital work is the critical path, with contractor and layout support engaged as bandwidth demands warrant. What You’ll Own Digital Block Architecture & RTL Design Own the micro-architecture and RTL implement

Hydraulic Systems Engineer (Associate, Experienced, or Lead) Company: The Boeing Company Boeing Defense, Space & Security (BDS) Mobility, Surveillance and Bombers (MS&B) B-52 Commercial Engine Replacement Program (CERP ) is seeking a Hydraulic Systems Engineer (Associate, Experienced or Senior) to join the Systems Engineering, Integration, and Test (SEIT) team . The selected candidate will drive engineering excellence on this complex development program in Oklahoma City, OK . Position Responsibilities: Operate as the team’s Subject Matter Expert on the B-52 Hydraulics Subsystem. Lead systems and multifunctional engineering efforts for the SEIT IPT, ensuring adherence to technical quality standards throughout the product lifecycle Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to define and implement systems engineering processes and best practices Conduct trade studies and risk assessments to inform design decisions and optimize system performance, cost, and schedule Develop and maintain system requirements, interface control documents, and verification and validation plans to ensure compliance with customer specifications and regulatory standards Oversee the integration of hardware and software components in System Integration Labs in Oklahoma City Oversee the verification and test of hardware and software components supporting the modification in San Antonio

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

What you’ll do Own and evolve the Quality Management System (QMS) to support a regulated medical device development program, including design controls and DHF maintenance. Establish and enforce requirements traceability: user needs → design requirements → verification/validation artifacts and change control. Define and run the program-level V&V strategy (verification, validation, and test coverage), including test plans, protocols, reports, and acceptance criteria. Drive risk management activities (e.g., DFMEA / PFMEA, hazard analyses) and ensure mitigations are reflected in requirements and verification. Lead document control: reviews, approvals, training, retention, and audit readiness. Partner with engineering to make quality “native” to the dev workflow (automated testing, release gates, software configuration management). Prepare the program for audits and inspections, including hands-on audit leadership. What we’re looking for Senior experience leading quality for complex hardware + software products in a regulated environment. Deep familiarity with design controls, DHF, document control, risk management, and verification planning. Strong systems thinking and the ability to translate ambiguous product intent into testable requirements. Comfortable collaborating directly with multidisciplinary engineering (recon/ML, embedded, mechanical, EE, cloud). Useful experience Regulated product quality leadership (ISO 13485 / 21 CFR 820 or equivalent), including audit readiness and FDA-facing work. eQMS + document control fluency (e.g., Greenlight Guru) that integrates cleanly with modern engineering workflows.

ABOUT THE BRAND: Callaway Golf Company is a premium golf equipment, gear and apparel company with a portfolio of global brands, including Callaway Golf, Odyssey, TravisMathew, and OGIO. Through an unwavering commitment to innovation and premium craftsmanship, Callaway designs, manufactures, and sells high-performance golf clubs, golf balls, apparel, bags, and other accessories—setting the standard for performance in the game of golf. Our Mission: To create demonstrably superior and pleasingly different products powered by innovative technology and premium craftsmanship enabling golfers of all abilities to play their best and find more joy in the game. Our company is a blend of experience and diverse backgrounds, and together we look to leave the past behind while moving the game forward. For more information, please visit https://www.callawaygolf.com Executes standardized golf ball testing procedures with accuracy and efficiency, ensuring reliable and consistent data collection. Maintains testing equipment, documents results, and partners with engineers and senior technicians to support product development and performance validation. Technical Execution Perform established golf ball test methods independently and accurately. Maintain working knowledge of all standard test procedures. Utilize required software tools (Excel, Minitab, and other testing systems) for data entry and basic analysis. Perform preventative maintenance and calibration on most assigned equipment. Identify equipment or test abnormalities and escalate when necessary. Quality & Productivity Produce accurate, wel

About the Team DoorDash Labs is an independent team within DoorDash. We explore robotics and automation to transform last mile logistics in the long term. If you have a passion for applying robotics solutions in a service used by millions of people, then we want to talk to you! About the Role We are hiring a Firmware Validation & Integration Engineer for our autonomy software team. This is a critical role to build robust and scalable validation for our firmware and systems to ensure reliability at every level. In this role, you will work with our electrical, firmware, and autonomy engineers to build the infrastructure and test suites required to validate the system. This includes designing and implementing our Hardware-in-the-Loop (HIL) simulation environments and automation frameworks from the ground up. You will report to the Autonomy Platform Lead on our Autonomy Platform Team at DoorDash Labs. We expect this role to be hybrid with some time in-office and some time remote. You’re excited about this opportunity because you will… Play an integral role on a small and focused team. Design and build Hardware-in-the-Loop (HIL) systems to simulate vehicle dynamics and sensor data for comprehensive firmware and system-level validation. Develop automated test infrastructure and software tools to exercise multiple embedded platforms throughout our robot system. Interface many layers of our control system including vehicle controls, power management, and motion control to ensure seamless system integration. Implement low-level test sequences and validation algorithms to safely stress-test vehicle components such as batteries, drive-train, and thermal management devices. Collaborate with cross-functional teams to identify edge cases and hardware-software corner cases that impact vehicle safety and performance. We’re excited about you because… BS/MS degree in Computer Science, Robotics, Electrical Engineering, or related technical field. 5+ years of experience in validati

About the Team DoorDash Labs is an independent team within DoorDash. We explore robotics and automation to transform last mile logistics in the long term. If you have a passion for applying robotics solutions in a service used by millions of people, then we want to talk to you! About the Role We are hiring an Autonomy Platform Engineer to build and evolve the foundational software that runs our autonomy stack across robot and compute platforms. The Autonomy Platform team works across embedded Linux, compute and sensor enablement, robotics middleware, process orchestration, data capture and replay, system observability, and performance. You will develop production software and tooling that enables autonomy engineers to bring up new hardware, deploy services reliably, diagnose failures, and validate system performance across robot generations. You will work closely with autonomy, firmware, electrical, hardware, manufacturing, and validation engineers and report to the Autonomy Platform Lead. We expect this role to be hybrid with some time in-office and some time remote. You’re excited about this opportunity because you will… Build and maintain core runtime, middleware, and platform services used by autonomy applications. Enable new compute, camera, lidar, and other sensor platforms. Improve process orchestration, messaging, configuration, startup and shutdown behavior, resource isolation, and fault recovery. Develop system observability, tracing, performance measurement, diagnostics, and regression-detection capabilities. Build reliable data capture, replay, and debugging workflows. Create provisioning, packaging, deployment, integration-test, and platform-readiness tooling. Lead complex debugging across application, middleware, OS, driver, networking, timing, and hardware boundaries. We’re excited about you because… Strong production C++ and Python experience. Experience with embedded Linux, robotics, autonomous vehicles, or complex mechatronic systems. Solid u

About AlphaSense: The world’s most sophisticated companies rely on AlphaSense to remove uncertainty from decision-making. With market intelligence and search built on proven AI, AlphaSense delivers insights that matter from content you can trust. Our universe of public and private content includes equity research, company filings, event transcripts, expert calls, news, trade journals, and clients’ own research content. The acquisition of Tegus by AlphaSense in 2024 advances our shared mission to empower professionals to make smarter decisions through AI-driven market intelligence. Together, AlphaSense and Tegus will accelerate growth, innovation, and content expansion, with complementary product and content capabilities that enable users to unearth even more comprehensive insights from thousands of content sets. Our platform is trusted by over 6,000 enterprise customers, including a majority of the S&P 500. Founded in 2011, AlphaSense is headquartered in New York City with more than 2,000 employees across the globe and offices in the U.S., U.K., Finland, India, Singapore, Canada, and Ireland. Come join us! About the Role: As a Senior Engineer, QE, you own test strategy and coverage for your team's features and act as a strategic quality partner to the engineers who build them. You design test plans, build and evolve automation frameworks, and embed quality-by-design.You partner closely with developers, product managers, and platform teams to define test requirements, guide teams toward sustainable quality practices, and help us ship with confidence at velocity. You will: Define and execute test strategies across UI, API, and service layers to ensure comprehensive coverage. Develop and maintain reliable automation frameworks and performance testing suites. Utilize AI-assisted tools and agentic workflows to accelerate testing and debugging cycles. Lead risk assessments, release validations, and root-cause analyses for critical issues. Implement shift-left pr

The Research Engineer – Mechatronics is a hands-on engineering role within the TaylorMade Research & Development team, focused on the design, prototyping, integration, and validation of electromechanical systems that advance golf equipment and player performance. This role demands deep practical expertise in mechatronics, sensor systems, electronic hardware, wiring, and embedded controls, combined with the ability to develop supporting software and user-facing tools. The ideal candidate is a builder and problem-solver who thrives in a laboratory and prototype environment, producing functional systems from concept through deployment. Essential Functions and Key Responsibilities: Design, prototype, wire, assemble, and test mechatronic and electromechanical systems used in golf equipment evaluation, performance measurement, and product development Develop and interpret wiring diagrams, schematics, and electrical specifications for custom hardware assemblies, test rigs, and IoT-connected devices Select, integrate, and characterize sensors (IMUs, load cells, encoders, pressure sensors, optical sensors, etc.) – including defining operating limits, calibration procedures, and signal conditioning requirements Design and implement IoT systems and wireless data acquisition platforms that capture real-time performance data from equipment and players Develop embedded firmware and control software for microcontrollers and microprocessors (e.g., Arduino, Raspberry Pi, STM32 or similar) to drive test automation and data capture systems Write clean, maintainable code to interface with hardware, process sensor data, and build internal and user-facing applications and interfaces; leverage AI-assisted development tools to accelerate prototyping and automate test routines; apply basic computer vision techni

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. About our Team: Micron’s Industrial and Physical AI team is driving the transformation of semiconductor manufacturing through Autonomous Operations, AI, robotics, and digital twin technologies! We develop and deploy innovative solutions across Micron’s global fabrication and assembly/test facilities, enabling smarter, safer, and more efficient operations at scale. Position Overview: We are seeking a hands-on Full-Stack AI Engineer to design, build, and deploy production-grade AI applications that support Micron's Autonomous Operations initiatives. This role owns the end-to-end development lifecycle, from data pipelines and AI models to APIs, web applications, digital twin integrations, and cloud/edge deployments, delivering impactful solutions for engineers, operators, and business leaders worldwide. Responsibilities: Design, architect, and deliver end-to-end AI products, including data ingestion pipelines, feature engineering, model training/inference, APIs, user interfaces, and application monitoring. Build and maintain modern front-end applications using React, Angular, or Streamlit, supported by backend services in Python and FastAPI. Develop scalable integrations between manufacturing systems, robotics platforms, AMRs, sensor networks, and enterprise applications to enable intelligent factory operations. Design and implement digital twin environments using platforms such as NVIDIA Omniverse, Gazebo, or Unity Robotics Hub to support simulation, validation, and o

About the Team DoorDash Labs is an independent team within DoorDash. We explore robotics and automation to transform last mile logistics in the long term. If you have a passion for applying robotics solutions in a service used by millions of people, then we want to talk to you! About the Role We are hiring a Software Integration Engineer for our Platform Integration team. This is a critical role with impact across the robot lifecycle, from manufacturing to daily operation. The Platform Integration team owns making sure the robot works as one cohesive system. The focus is on the interfaces between subsystems; this role in particular is focused on the software side handling interaction between: OS & software stack; firmware; networking; timing; and calibration. In this role, you will work cross functionally with our electrical, hardware, firmware, and autonomy engineers to support new functionality both in both hardware and software. This includes creating provisioning tools, functional tests, and supporting integration into the autonomy software stack. You will report to the Autonomy Platform Lead on our Autonomy Platform Team at DoorDash Labs. We expect this role to be hybrid with some time in-office and some time remote. You’re excited about this opportunity because you will… Play an integral role on a small and focused team. Lead system-level debug when an issue crosses subsystem boundaries or no single team can isolate it. Support early integration of new sensor and software component designs by identifying interface requirements, risks, dependencies and required checks. Design and maintain integration tests, test setups, and procedures to ensure subsystems, once combined, satisfy requirements and design intent. Build and maintain the mission-readiness checks used before manufacturing signoff, validation, field testing, or mission use for different robot platforms. Create the tools, checks, and debug guidance that Manufacturing Integration, Validation,

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a TPM to drive development and integration of a range of sensor systems for robotics. This role will drive cross-functional alignment across requirements, engineering design, integration, validation, manufacturing, supply chain, and release processes, helping turn complex sensor-system needs into clear plans, decisions, and milestones. Location and in-person expectations: This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive requirements alignment across engineering design, integration, testing, and validation for camera modules, LiDAR, IMUs, RADAR, proximity sensors, audio components and the systems they interact with. Coordinate the integration of modules including electrical, mechanical, harnessing, and software interfaces with the full robotic system with deep understanding of timelines to drive the respective PCBAs, enclosures, build and test fixtures, connectors and cables. Establish effective cadences for technical reviews, BOM readiness, change management, production releases, approvals, and decision tracking. Align harnesses, fasteners, assembly fixtures, test fixtures, and documentation so cross-functional teams can execute against a clear plan. Lead validation planning around functional, reliability, NVH failure modes, including testing needs, schedules, and exit criteria. Partner with manufacturing and supply chain to manage handoffs, lead times, dependencies, and production readiness. Drive tradeoff decisions across cost, qua