Flight Operations Mechanic in Berkeley

Flight Operations Mechanic — USA - Berkeley, MO. Apply via Workday.

Flight Operations Mechanic Company: Boeing Defense, Space and Security (BDS) has an exciting opportunity for Flight Operations Mechanic to support a variety of programs in Berkeley, MO! Flight encompasses all of the duties of the following job classifications: Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight. Position Responsibilities: • Perform operational checkout of aircraft prior to and during preflight. • Inspect explosive and armament installations. • Maintain aircraft historical records. • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. • Inspect and/or perform bench and flight line operational checkout and inspect, troubleshooting, adjustment and repair of electrical and electronic systems. • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. • Perform aircraft and/or spacecraft bench or flight line operational chec

Manufacturing Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test and Evaluation (BT&E) Test Operations & Engineering (TO&E) Instrumentation Data System Installation Design team located in Berkeley, MO is seeking Manufacturing Engineers to provision Flight Test Instrumentation hardware on multiple aircraft platforms. On this team, a Manufacturing Engineer (Assembly & Installation) has the primary responsibility for the fabrication and installation of the mechanical and electrical hardware required to install a flight test data system. Design-Build Flight Test Manufacturing Engineers work the entire production cycle from review of engineering, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing) and detail planning, and continuing on through installation planning and shipside support. Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements. Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to ensure fabrication meets design, test, and pro

Vehicle Management System (VMS) Hardware Engineer (Experienced) Company: The Boeing Company Boeing Defense, Space & Security (BDS) Flight Systems Engineering Capability is currently seeking an Experienced Vehicle Management Systems Hardware Engineer to join the Air Dominance Vehicle Management System (VMS), Hardware team located in Berkeley, MO. You will work across engineering disciplines to help us design elements of the Vehicle Management Systems (VMS) hardware. You will collaborate with our requirements and labs teams to implement and test your designs. Mechanical, Electrical, Aerodynamics, and other engineers are all welcome – to succeed in this role, you will need to leverage your area of expertise and quickly learn on the job about other areas to develop capabilities for our Vehicle Management System Computer. You will get to see tangible results of your efforts as you contribute to exciting aircraft development programs in St. Louis. Develops and documents moderately complex electronic and electrical s system requirements. Design hardware, and interfaces specifications. Test and validates to ensure designs meet operational and functional requirements Assist in monitoring supplier performance to ensure integration and

Associate Loads and Dynamics Engineer Company: The Boeing Company The Boeing Defense, Space & Security (BDS) organization is seeking an Associate Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri . As an Associate Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the Air Dominance division. This position requires strong analytical problem solving skills and familiarity with one or more of the following: external loads, structural dynamics, aeroelastic stability, aerodynamics, aircraft stability and control, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by perfo

Associate Manufacturing Engineer Company: The Boeing Company The Boeing Defense, Space & Security (BDS) team is seeking an Associate Manufacturing Engineer for Phantom Works located in Berkeley, MO to support our Specialty Materials Manufacturing portfolio . Who We Are: At Boeing St. Louis, we are leaders in aerospace innovation, dedicated to shaping the future of flight. Our facility serves as a hub for advanced manufacturing, where we design and produce cutting-edge military products that are vital to national defense. We take pride in our commitment to quality, safety, and sustainability. We want you to join our team and contribute to the production of aircraft parts and assemblies made from composite materials. Position Overview: As a Manufacturing Engineer, you will support the development and implementation of production methodologies and tooling for specific materials that are manufactured in St. Louis. You will collaborate with Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines, ensuring efficient manufacturing processes that meet stringent quality standards. Position Responsibilities Develop and implement manufacturi

Flight Test Lead — USA - Berkeley, Macau S.A.R.. Apply via Workday.

Flight Simulation Software Engineers (Associate, Experienced, and Senior) Company: The Boeing Company The Boeing Company is currently seeking Flight Simulation Software Engineers (Associate, Experienced, and Senior) to join the Flight Simulation Labs team located in Berkeley, MO . This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization. **Our teams are currently hiring for a broad range of experience levels including; Associate, Experienced, and Senior Level Software Engineers. Our Air Dominance software engineers design, develop, and demonstrate avionics solutions for the platforms we build and upgrade. Your efforts will assist in integration of innovative technologies to maintain our platform’s dominance over the battlefield for many decades to come. Additionally, our software engineers support the Flight Simulation products associated with our platforms. The roles will involve software development for tools that support simulation infrastructure across Flight Simulation Labs. Selected candidates will be aligned to a statement of work that best suits their interests and skillset, some of which could include: Creating core simulation infrastructure to serve as

Air Proprietary 2 Hardware Engineering Manager - Flight Simulation Labs — USA - Berkeley, MO. Apply via Workday.

Aerodynamics Engineer (Aero-Stability & Control Analyst) Company: The Boeing Company Boeing Defense, Space & Security (BDS) is hiring an Experienced or Senior Aerodynamics Engineer to perform propulsion system qualification support and analysis in the St. Louis, MO region ! Position Responsibilities: Performs aerodynamic/aerothermodynamics design and analysis of flight vehicles to ensure that the vehicle meets requirements Key contributor to developing new and improving existing technologies, tools and processes to enhance technology readiness, improve vehicle performance and reduce cycle time and cost Conducts, coordinates and/or develops test requirements to meet test objectives using established processes Assesses the impact of proposed regulations to determine the effect on cost, performance, producibility, maintainability and safety Supports certification and qualification processes of the aerodynamic/ aero thermal characteristics of flight vehicles Assists in training others Works under general supervision Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engine

Associate Systems Engineering Support Analyst Company: The Boeing Company Boeing Defense, Space & Security (BDS has an exciting opportunity for an Associate Systems Engineering Analyst (Level 2) for Flight Simulation Labs , located in Berkeley, MO . The Flight Simulation Labs organization has expertise supporting marketing, design, development, integration, test and training objectives for Boeing military aircraft. As a Systems Engineering Analyst, you will be responsible for researching, analyzing, and compiling technical data to optimize system performance throughout the program lifecycle. You will apply systems engineering processes, methodologies, and tools to develop and refine system architectures, functional requirements, and product designs for programs such as T-7, F-15, F-18, and MQ-25. Position Responsibilities Apply systems engineering methodologies to design, develop, and maintain systems, tools, and new product solutions Serves as system administrator for Engineering tools in the Flight Simulation Labs organization Identifies opportunities and implements data analysis and automation including dashboard and reporting for the organization Derives and develops basic architectur

Electro-Optical/Infrared Signature Analyst Engineer (Mid-Level or Senior) Company: The Boeing Company The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking an Electro-Optical/Infrared Signature Analyst Engineer (Mid-Level or Senior) to join the Phantom Works team located in St. Louis, MO. This is a great opportunity to work on new systems and technologies as part of an integrated product team. This position will apply knowledge of advanced infrared and electro-optical signature design, analysis, integration, and test techniques for system integration. Candidates will apply electromagnetic theories and principles to develop new and innovative systems and components for next generation platforms. This job requires both hands-on and deskwork. Position Responsibilities: Perform design, analysis, and integration activities for technology and design integration of EO/IR design practices into advanced platforms Assist in developing and documenting requirements for electromagnetic systems and components Perform modeling and simulation of EO/IR performance for design optimization and validation Generate design influence initiatives and direct design trade studies that may result from those i

Experienced Low Observables Mission Systems Integration Engineer Company: The Boeing Company We are seeking a Low Observables (LO) Design & Integration Engineer to support design and analysis activities for stealth/low-signature systems. The engineer will perform LO material and structure design, electromagnetic analysis, integration and test support, data processing, and technical reporting. The role requires practical experience with LO materials and technologies, solid electromagnetics knowledge, and hands-on expertise with computational electromagnetic (CEM) solvers used to design and optimize LO solutions. Key Responsibilities Perform design and analysis tasks for LO materials, coatings, treatments, and structural treatments to minimize radar, infrared, and other signatures. Develop and validate LO integration concepts for aircraft/vehicle structures and subsystems, including manufacturability and testability considerations. Use CEM solvers to model, simulate, and optimize LO components and systems (e.g., surface treatments, RAM, apertures, seams, RAM-structure interactions). Perform sensitivity studies and trade-offs across materials, geometry, and integration approaches to meet system-level LO requirements. Process and analyze measu

Test & Evaluation Lab Tech (Electrical/Electronic Equipment) Company: The Boeing Company The Boeing Company has an exciting opportunity for Test & Evaluation Lab Tech to join Boeing Defense, Space & Security (BDS) in Berkeley, MO. As a Boeing employee you’ll be part of a winning team that does great things every day BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: • Installing and maintaining Flight Simulation equipment consisting of computers, monitors, audio systems, visual systems, crew stations and rack equipment • Troubleshoot and resolve electronic hardware issues with minimum down time • Plans, conducts and documents tests on products, systems, components, materials, and manufacturing processes and technologies • Designs, fabricates, builds and analyzes test s

Test & Evaluation Lab Tech (Electrical/Electronic Equipment) Company: The Boeing Company Job Description The Boeing Company has an exciting opportunity for Test & Evaluation Lab Tech to join Boeing Defense, Space & Security (BDS) in Berkeley, MO. As a Boeing employee you’ll be part of a winning team that does great things every day BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: • Installing and maintaining Flight Simulation equipment consisting of computers, monitors, audio systems, visual systems, crew sta