Instrumentation Automation Service Engineer in United States

Work Flexibility: Field-based Overview As a Clinical Specialist at Stryker, you will help improve orthopedic surgeries around the world and play a direct role in our mission of making healthcare better. In this role, you will build deep clinical and technical expertise across both robotic (Mako SmartRobotics™) and manual orthopedic procedures. You will support surgeons in the operating room by assisting with pre-operative planning, case preparation, system setup, and real-time procedural workflows to ensure safe, accurate, and efficient outcomes. You will gain hands-on experience working with Mako technology—including CT-based planning, implant sizing, registration, and intra-operative support—while also developing strong competency in manual procedures, instrumentation, and OR protocols. Through shadowing experienced team members, supporting product demonstrations, and participating in labs and education programs, you will learn the systems, processes, and best practices that define world-class clinical support. This role requires adaptability, steady composure, and strong problem-solving in a fast-paced surgical environment. Because patients’ needs don’t follow business hours, you will also participate in on-call coverage, including evenings, weekends, and holidays, to ensure uninterrupted support for urgent cases and time-sensitive customer needs. What You Will Do Gain competency in solo case coverage for manual and robotic procedures through hands-on training. Assist surgeons with pre-operative CT-based planning, implant sizing, and positioning using advanced software. Support full case preparation, including instrumentation checks, equipment setup, and OR readiness. Troubleshoot technical issues confidently and efficiently in the operating room. Learn and supp

Work Flexibility: Onsite ​​​ Schedule 1st Shift: Mon – Fri, 8am – 5pm Overtime based on business needs What you will do As the Senior EMC & RF Test Technician, you will contribute to global regulatory compliance efforts through the execution of testing activities, development of in-house laboratory capabilities, and support of projects that ensure products meet evolving international product safety and EMC standards.​​ ​​​Perform and document electromagnetic compatibility (EMC) and radio frequency (RF) testing on new and existing medical devices to demonstrate compliance with applicable domestic and international standards. ​Operate, maintain, troubleshoot, and verify EMC and RF laboratory equipment, including shielded rooms, EMC chambers, antennas, receivers, signal generators, amplifiers, and associated test instrumentation. ​Configure, build, modify, and verify product test setups and support equipment to meet EMC and RF testing requirements. ​Support the development, expansion, and continuous improvement of in-house EMC and RF testing capabilities to meet evolving technology and compliance requirements. ​Collaborate with engineering teams to develop test strategies, execute compliance testing, and support product development activities. ​Investigate, troubleshoot, and document test failures, observations, and anomalies, communicating findings and recommendations to engineering and project teams. ​Create, update, and maintain test procedures, protocols, job-aids, work instructions, and laboratory documentation in accordance with quality system requirements. ​Evaluate, recommend, procure, and maintain laboratory equipment, software, and tools necessary to support current and future EMC and RF testing capabilities. ​Identify and implement improvements t

Electronic System Design and Analysis Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test Operations and Engineering (TO&E) team in Berkeley , Missouri is seeking an Electronic System Design and Analysis Engineer to join our Instrumentation Installation Design group to support all major programs in the St. Louis area. We are currently hiring for a broad range of experience levels including Experienced and Senior Electronic System Design and Analysis Engineers. Position Responsibilities: Electrical Design & Testing AC and DC power applications Assisting shop with build information Reading electrical drawings/schematics Troubleshooting Electrical component/wiring faults Production Functional and Environmental Acceptance Testing Designing new test sets for various weapon and aircraft electronics Performs system tests to verify operational and functional requirements Supports resolution of product integration issues and production anomalies Researches basic technologies for potential application to company business needs Assists in monitoring suppliers' performance to ensure compliance with requirements Develops or modifies basic hardware and software designs based on defined requirements Assists with the development and documentation of electronic and electrical system requirements This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skill/Experience): <

Manufacturing Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test and Evaluation (BT&E) Test Operations & Engineering (TO&E) Instrumentation Data System Installation Design team located in Berkeley, MO is seeking Manufacturing Engineers to provision Flight Test Instrumentation hardware on multiple aircraft platforms. On this team, a Manufacturing Engineer (Assembly & Installation) has the primary responsibility for the fabrication and installation of the mechanical and electrical hardware required to install a flight test data system. Design-Build Flight Test Manufacturing Engineers work the entire production cycle from review of engineering, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing) and detail planning, and continuing on through installation planning and shipside support. Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements. Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to ensure fabrication meets design, test, and program requirements. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Manufacturing Engineers. Position Responsibilities: Synthesis of test hardware & instrumentation requirements in support of flight test Review of design models and drawings, creating/reviewing redlines and coordinating with design to incorporate updates Authorship of manufacturing plans to facilitate build

About the Team Customer education helps customers and partners build the practical skills and confidence to use AI and OpenAI products safely and effectively. The team focuses on role- and skill-based learning paths, practical content, and product experiences that accelerate learning in the workplace. It brings together learning and enablement expertise, field insight, product signals, and measurement to improve learner and business outcomes. Together, these experiences will help enterprise users build practical AI skills, apply them with confidence in their work, and demonstrate what they can do. Employers will gain a clearer view of workforce skills and progress, helping them recognize capability, focus development where it matters most, and build confidence in workforce readiness. About the Role We’re looking for a full-stack engineer to define and build a new class of learning experiences. This is an early-stage product area where technical judgment, product sense, and learner empathy are critical. You will be setting a technical vision for how people use AI to learn how to use AI, safely and beneficially. This is a hands-on, 0-1 product engineering role with broad technical and product ownership. You’ll set direction, make foundational decisions, and ship the first versions of experiences that can grow into the default way people learn at work. You will drive full-stack product experiences end to end, from prototype through launch, instrumentation, iteration, and production hardening. The work spans interaction design, frontend implementation, backend APIs and services, learner state, content and runtime integration, telemetry, evaluation, reliability, safety, accessibility, and launch readiness. You’ll work closely with our education, GTM, and engineering teams to translate how people learn into products people want to use. bring role- and skill-based learning paths into the product, designing coaching, feedback, and adaptive support which responds to each lea

Job Details: Job Description: This is a central requisition for all Ocotillo Technology Fabrication (OTF) functional areas. Successful candidates will be aligned to the areas that match best with factory needs. Join Intel and build a better tomorrow. Intel is in the midst of an exciting transformation, with a vision to create and extend computing technology to connect and enrich the lives of every person on Earth. Our high-volume manufacturing facility in Chandler, Arizona is looking for amazing talent. Join and help us create the next generation of technologies that will shape the future for decades to come. The Ocotillo Technology Fabrication (OTF) Module Engineer role is multifaceted. The ideal candidate will have a passion for instrumentation and equipment with the goal of developing a robust manufacturable process module. This is a central requisition for all functional areas: Litho, Wet Etch, Dry Etch, Diffusion, Implant, Planar and Thin Films. Successful candidates will be aligned to the areas that match best with factory needs. As an OTF Module Engineer you will play an important role in the OTF engineering team. You will be responsible for owning all aspects of one or more of the factory's 300mm toolsets. Your sustaining responsibilities will include the safety and cleanliness of your area and ensuring Copy Exactly for your toolset. You will also be expected to review the relevant control charts and tool output daily and ensure your toolset and layers remain excursion free. You will be responsible for delivering Model of Record (MOR) availability and achieving 100 percent matching for all relevant operations. For new technology start-ups, you will be responsible for tool installations, conversions, and qualifications; and sustained matching performance. You will be expected to drive continuous improvement in the he

Job Details: Job Description: This is a central requisition for all Ocotillo Technology Fabrication (OTF) functional areas. Successful candidates will be aligned to the areas that match best with factory needs. Join Intel and build a better tomorrow. Intel is in the midst of an exciting transformation, with a vision to create and extend computing technology to connect and enrich the lives of every person on Earth. Our high-volume manufacturing facility in Chandler, Arizona is looking for amazing talent. Join and help us create the next generation of technologies that will shape the future for decades to come. The Ocotillo Technology Fabrication (OTF) Module Engineer role is multifaceted. The ideal candidate will have a passion for instrumentation and equipment with the goal of developing a robust manufacturable process module. This is a central requisition for all functional areas: Litho, Wet Etch, Dry Etch, Diffusion, Implant, Planar and Thin Films. Successful candidates will be aligned to the areas that match best with factory needs. As an OTF Module Engineer you will play an important role in the OTF engineering team. You will be responsible for owning all aspects of one or more of the factory's 300mm toolsets. Your sustaining responsibilities will include the safety and cleanliness of your area and ensuring Copy Exactly for your toolset. You will also be expected to review the relevant control charts and tool output daily and ensure your toolset and layers remain excursion free. You will be responsible for delivering Model of Record (MOR) availability and achieving 100 percent matching for all relevant operations. For new technology start-ups, you will be responsible for tool installations, conversions, and qualifications; and sustained matching performance. You will be expected to drive continuous improvement in the health and matching of your to

Work Flexibility: Field-based Overview As a Clinical Specialist at Stryker, you will help improve orthopedic surgeries around the world and play a direct role in our mission of making healthcare better. In this role, you will build deep clinical and technical expertise across both robotic (Mako SmartRobotics™) and manual orthopedic procedures. You will support surgeons in the operating room by assisting with pre-operative planning, case preparation, system setup, and real-time procedural workflows to ensure safe, accurate, and efficient outcomes. You will gain hands-on experience working with Mako technology—including CT-based planning, implant sizing, registration, and intra-operative support—while also developing strong competency in manual procedures, instrumentation, and OR protocols. Through shadowing experienced team members, supporting product demonstrations, and participating in labs and education programs, you will learn the systems, processes, and best practices that define world-class clinical support. This role requires adaptability, steady composure, and strong problem-solving in a fast-paced surgical environment. Because patients’ needs don’t follow business hours, you will also participate in on-call coverage, including evenings, weekends, and holidays, to ensure uninterrupted support for urgent cases and time-sensitive customer needs. What You Will Do Gain competency in solo case coverage for manual and robotic procedures through hands-on training. Assist surgeons with pre-operative CT-based planning, implant sizing, and positioning using advanced software. Support full case preparation, including instrumentation checks, equipment setup, and OR readiness. Troubleshoot technical issues confidently and efficiently in the operating room. Learn and support workflow for daily account

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

Datadog's Application Performance Monitoring (APM) provides deep visibility into the health, performance, and lifecycle of modern distributed applications, tracing requests from end-user devices (web and mobile) through to backend services. Our goal is to help customers detect root causes faster, optimize application performance, and improve resource efficiency at scale. As the Engineering Manager for APM Serverless, you will help define and deliver the end-to-end serverless APM experience, from auto-instrumentation through troubleshooting, and ensure that OpenTelemetry and Datadog-native customers alike have a frictionless and performant journey. You will also lead efforts to expand coverage of cloud-managed services across providers, ensuring customers can seamlessly trace and monitor critical services in all major and emerging cloud environments. We’re looking for an experienced engineering leader who thrives at the intersection of infrastructure and developer experience. You should care about well-designed APIs, observability-first thinking, and building systems that empower other developers. This is a high-leverage role that will influence how developers across the industry understand and instrument their serverless workloads. At Datadog, we place value in our office culture - the relationships that it builds, the creativity it brings to the table, and the collaboration of being together. We operate as a hybrid workplace to ensure our employees can create a work-life harmony that best fits them. What You’ll Do: Lead a polyglot team of 8-9 engineers and partner closely with Product and Engineering teams across Datadog to deliver industry-leading serverless capabilities that power consistent, scalable, and intuitive instrumentation across languages. Drive a domain that is technically rich: Lambda, Azure Functions, GCP, OTel billing, Rust, durable functions, distributed tracing across managed services. Engineers on this team work

Training Device Technician (Training Device Maintenance) Company: Boeing Aerospace Operations Boeing Global Services (BGS) and the F-22 GTE Services Team are seeking a Mid-Level Training Device Technician (Maintenance) to support our team in Sheppard AFB, TX . This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the Sheppard AFB, Texas facility. Position Responsibilities: Provide F-22 training device maintenance services at Sheppard AFB, TX. Assists in repairs, tests, installs, configures, upgrades and assists in the modification of F-22 Maintenance Training Device (MTD) components, devices, hardware and software. Performs detailed inspections for pre-operations, post-operations and component handling. Inspect components and LRU's to verify status prior to installation. Consults with engineers in troubleshooting systems and support equipment. Troubleshoot to isolate mechanical or electrical faults and repair faulty components. Performs functional test of training device systems and monitors device instrumentation and indicators. Performs a multi-disciplined range of technical systems applications and activities. Installs, configures and maintains multi-platform systems hardware, software and components. Ensuring systems conform to architectural objectives. Evaluates complex system’s production readiness and supportability. Documents work by engineering planning documents and/or technical manuals. Excellent customer interface skills and communication skills, both oral and written, are required. Must be able to work independently, one-on-one, and in a team setting. Logisti

Work Flexibility: Field-based Due to the nature of this role and travel requirements associated with this role, we will accept candidates from the 48 continental United States. Job Summary: As a National Leaves Clinical specialist, you will work directly with a JR/MPS team to support robotic and manual joint replacement procedures. You will be required to work within RepSuite for scan and schedule management in multiple territories across the country for employee leave of absence and when otherwise needed by the business. The NLCS will directly report to the Senior Manager, LEAP but indirectly work alongside local Mako Manager, JR Sales Manager, and GM. When not deployed the NLCS will assist and train with local JR team and execute all necessary clinical functions with that team. Field assignments can be a short as two week and as long as 3 months or more. Essential Duties & Responsibilities: Clinical Expertise in robotic applications Develop and maintain expert-level knowledge of Mako robotic systems, their functionalities, and clinical applications. Develop and maintain expert-level knowledge of manual joint replacement instrumentation and implants. Serve as a clinical resource to healthcare professionals, offering insights, training, and support. Deliver comprehensive customer experience tailored to surgeons, nurses, and other clinical staff during the deployment. Ensure that healthcare teams are proficient in MAKO technology, understand clinical benefits and have access to program resources. Be a point of contact for clinical inquiries, troubleshooting, and technical support related to Mako and manual instrumentation and implants. Relationship Building: Build and maintain strong relationships with healthcare providers and hospital staff, internal team members and potential new c

Early Career Mechanical Design Engineer Company: The Boeing Company Boeing Test & Evaluation (BT&E) is looking for an Early Career Mechanical Design Engineer to support the Environmental Test Design Engineering team in Berkeley, MO. The primary focus of this position is to support St. Louis Environmental Lab testing for local Boeing Defense & Space (BDS) programs. The design team works in partnership with the lab test teams to provide the designs and hardware needed to complete testing. Test capabilities within the Environmental labs include vibrational/structural dynamics, acoustic, airflow systems, fuel flow systems, high temperature flow impingement, and environmental control chambers, where temperature, humidity, and pressure are varied. Mechanical Design Engineers on the team design and modify test articles, fixtures, and support structures that integrate with our lab facilities. Design work ranges from adapters and fixtures to full test rigs and complete aircraft subsystems with their support structures. Responsibilities include designing interfaces to facility infrastructure such as supplied pressure, heating/cooling, power, hydraulics, and a full suite of instrumentation. Design Engineers support fabrication, installation, connection, and acceptance/check-out to deliver test-ready hardware. Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. As part of this team, you will have the opportunity to work on the latest military aircraft and weapons programs such as T-7A, F-15, F/A-18, MQ-25, JDAM, SDB, in addition to Phantom Works proprietary efforts. Position Responsibilities: Develop mechanical design criteria from

About the Team OpenAI Consumer Devices is building the next generation of products that bring powerful AI into people’s everyday lives. Guided by OpenAI’s mission to ensure AGI benefits all of humanity, our team combines world-class researchers, engineers, designers, and operators who care deeply about creating useful, intuitive, and responsible technology. You’ll have the opportunity to work alongside exceptional people on ambitious, zero-to-one challenges at the intersection of hardware, software, and AI. This is a chance to help define an entirely new category of products—and shape how people experience AI in the future. Our team works across custom silicon, embedded systems, operating systems, and cloud services to build reliable consumer devices and the platforms behind them. We connect kernel development with the broader software stack to deliver complete product capabilities. About the Role As an Operating Systems Engineer focused on the Linux kernel, you will design, develop, and maintain the kernel capabilities that underpin OpenAI’s consumer devices. You’ll bring deep expertise in one or more Linux kernel subsystems and carry solutions through the higher-level software stack. Your ownership will extend into the userspace services, libraries, tools, and interfaces needed to deliver complete product features. You’ll shape the boundaries between kernel and userspace, make design decisions across the stack, and see your work through development, integration, and production. In this role, you will: Build kernel capabilities: Design, implement, and maintain Linux kernel subsystem changes that support device capabilities and product requirements. Own features across the stack: Choose appropriate kernel and userspace boundaries, and build the interfaces and supporting components needed to deliver reliable features in shipped products. Debug complex system behavior: Use tracing, profiling, instrumentation, and diagnostic tools to resolve correctness, concurrency, p

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Field Service Specialist provides installation support, commissioning, maintenance, troubleshooting, and on-site customer support for deployed KARNO Power Modules. This is the first dedicated field service role supporting KARNO and is a foundational position within Hyliion's field service organization, which is being built to support installations across the United States. Early deployments focus on defense and data center applications. The position begins with an intensive training period of approximately three to four months in Milford, OH, working alongside the research, development, and engineering teams as KARNO units are built and serviced during final testing, including training on heat engine fundamentals, PLCs, HMIs, and advanced control systems. The position then transitions to field installation, commissioning, and long-term on-site support at customer locations, initially across the West Coast and expanding to other regions as the installed base grows. As the service organization scales, this position helps define its processes and standards. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Provide on-site maintenance, troubleshooting, and break-fix support for deployed KARNO units, with remote support from the engineering team. Diagnose issues using remote monitoring systems and troubleshooting logs. Troubleshoot controls, instrumentation, and high-voltage electrical system issues. Super