Lead Test Program Development Engineer Manager Manager Consultant Manager Specialist in United States

Principal Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is seeking a Principal Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 6) for a satellite development program in Huntington Beach or El Segundo, California. This position will lead a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Drives technical excellence throughout all Optical Sensor development activities Troubleshoots sensor design and integration issues with the telescope and sensor focal plane Provides technical leadership to SMS and BTI sensor teams Serves as the primary technical interface with the EO/IR suppliers Provides oversight and approval of technical approaches, products and processes. Works closely with program manager, program chief engineer, and other Boeing teams Ensure mission success and prompt resolution of anomalies Provides mentoring and coaching to Optical Sensor Engineers and Technicians Performs Technical Lead Engi

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer. Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardwar

Flight Test Engineering Manager Company: The Boeing Company We are seeking a Flight Test Engineering Manager to join the Boeing Test & Evaluation (BT&E) team supporting the Mobility Surveillance and Bombers (MS&B) portfolio in Oklahoma City, OK . In this role, you will lead the team responsible for planning, integrating, and executing flight test and system test activities for Boeing’s Airborne Warning and Control System (AWACS) programs. This role combines technical leadership, program execution, and people development, requiring a leader who can build high-performing teams, foster collaboration across engineering disciplines, and drive disciplined test execution in a dynamic environment. You will partner closely with internal and external stakeholders to deliver safe, efficient, and high-quality test outcomes while developing the next generation of flight test engineers. Why Join Us: Lead a high-impact Flight Test Engineering team supporting AWACS programs, influencing program test strategy and execution on mission-critical platforms Join a close-knit Flight Test community where teamwork, trust, and collaboration are essential to safely executing complex test programs Partner with cross-functional engineering, operations, program management, and customer teams to solve complex technical challenges and deliver safe, efficient, and high-quality test outcomes Position Responsibilities: Develop and coach a diverse team of engineers and mission systems operators by providing technical guidance, performance management, mentoring, and career development Lead the planning integration, and execution of lab, ground, and flight tests while ensur

Manufacturing Test Engineering Manager Position Summary We are seeking an experienced Manufacturing Test Engineering Manager to lead the development and execution of the end-to-end manufacturing test strategy for next-generation AI server platforms and datacenter infrastructure. This role is responsible for defining and driving the manufacturing test architecture from L6 board assembly through L11 rack-level integration and final system validation , ensuring world-class product quality, manufacturability, and production scalability. This leader will manage a team of 3–5 Manufacturing Test Engineers while partnering closely with Hardware, Firmware, Platform, Validation, Quality, Operations, and Joint Design Manufacturing (JDM) partners. The role owns the manufacturing test strategy, test coverage, factory test infrastructure, manufacturing capacity planning, and continuous improvement of manufacturing quality. Key Responsibilities Manufacturing Test Strategy Define and own the end-to-end manufacturing test strategy from L6 board assembly through L11 rack integration . Develop standardized manufacturing test methodologies that optimize quality, throughput, cost of test, and scalability across multiple products and JDM sites. Establish manufacturing test standards, best practices, and engineering processes that support high-volume server manufacturing. Technical Leadership & People Management Lead, mentor, and develop a team of 3–5 Manufacturing Test Engineers supporting multiple hardware programs. Establish team priorities, allocate resources, and ensure successful execution of manufacturing test deliverables. Foster a culture of technical excellence, accountability, collaboration, and continuous improvement. Serve as the primary technical escalation point for manufacturing test and production issues. Cross-Functional Engineering Collaboration Partner with Hardware, Platform, Firmware, Validation, Reliability, Quality, and Operations teams to ensure manufac

About the Team The Early Access Program (EAP) team leads high-impact alpha programs at the intersection of customers, Product, Research, Engineering, GTM, Security, Legal, and launch teams. We partner with customers to test emerging capabilities with real-world use cases, surface actionable insights, and support launch decisions. Our team is made up of builders who learn quickly, collaborate deeply, create clarity in ambiguity, communicate openly, and iterate constantly. About the Role We’re hiring an Early Access Deployment Engineer to lead technical engagements with customers who are leveraging our frontier capabilities to solve real-world use cases. You will work at the earliest—and often messiest—stage of development, when capabilities are still unclear, tooling and processes are evolving, and the path from promising technology to a valuable real-world application has yet to be defined. You will be a hands-on builder, problem solver, and technical partner to customers and our research/product team. You’ll push beyond initial assumptions, identify high-value use cases, prototype solutions, design useful evaluations, and troubleshoot what is and is not working. Managing multiple customer engagements at once, you will help customers navigate ambiguity and difficult technical decisions while translating their experience into clear, actionable feedback for Research and Product. You will also own the end-to-end execution of early access programs—from onboarding customers, supporting live experimentation, synthesizing findings, and informing launch decisions. You’ll collaborate deeply with Research, Product, Engineering, Applied Evals, GTM, Legal, Security, Marketing, and other launch partners to create clarity, manage risk, and keep programs moving through changing conditions. Success in this role means turning frontier capabilities into real-world customer value and high-quality research signals. You will develop reusable technical approaches from early deployments,

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. MTS, Interface Pathfinding Hardware Development Engineer About the Role At Micron, our vision is to transform how the world uses information to enrich life for all. As a global leader in memory and storage innovation, we develop technologies that accelerate intelligence and enable the next generation of high-speed interfaces. Micron’s Interface Pathfinding team drives performance-scaling innovation across circuits, signaling, packaging, and interconnects with a 3–5 year technology horizon. As the Interface Pathfinding Hardware Development Engineer , you will own characterization for a high-speed interface test-chip program: the characterization plan and its success criteria, development of the characterization bench hardware and its automation, the measurement-uncertainty budget, and the correlation report proving the silicon matches the models. You will join a small, senior team spanning analog design, layout, digital design, and verification, working closely with the Chip Lead and the Signal Integrity and Physical Design engineers — driving decisions independently while consulting heavily with other experts across Micron. This is a foundational hire for a growing program. Strong execution early is expected to lead to follow-on projects of increasing scope, team size, and characterization complexity — including an expanding mandate for AI-enabled engineering leadership across the organization. What You’ll Own Characterization Planning • Derive the electr

Hydraulic Systems Engineer (Associate, Experienced, or Lead) Company: The Boeing Company Boeing Defense, Space & Security (BDS) Mobility, Surveillance and Bombers (MS&B) B-52 Commercial Engine Replacement Program (CERP ) is seeking a Hydraulic Systems Engineer (Associate, Experienced or Senior) to join the Systems Engineering, Integration, and Test (SEIT) team . The selected candidate will drive engineering excellence on this complex development program in Oklahoma City, OK . Position Responsibilities: Operate as the team’s Subject Matter Expert on the B-52 Hydraulics Subsystem. Lead systems and multifunctional engineering efforts for the SEIT IPT, ensuring adherence to technical quality standards throughout the product lifecycle Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to define and implement systems engineering processes and best practices Conduct trade studies and risk assessments to inform design decisions and optimize system performance, cost, and schedule Develop and maintain system requirements, interface control documents, and verification and validation plans to ensure compliance with customer specifications and regulatory standards Oversee the integration of hardware and software components in System Integration Labs in Oklahoma City Oversee the verification and test of hardware and software components supporting the modification in San Antonio

Lead Design and Analysis Engineer (Electrical Systems Design) Company: The Boeing Company Boeing is currently hiring for a Lead Design and Analysis Engineer located in Berkeley, MO to be a part of the MQ-25 Electrical and Equipment Installation team. The MQ-25 Stingray is a new autonomous, unmanned carrier based refueling air vehicle. The selected candidate will be a part of aviation history by helping our Navy customer productization Autonomous Carrier landing, takeoff and refueling capabilities. The MQ-25 program is currently building the Engineering and Manufacturing Development (EMD) vehicles for the Navy. Additional work is under way for the beginning of the Low Rate Initial Production (LRIP) program for additional vehicles. The MQ-25 Electrical & Equipment team is responsible for the power architecture & design, electrical equipment technical management, electrical installation design, wire harness design, and integrating avionics and other equipment into the vehicle. This role will be focused on the power architecture & design. Position Responsibilities: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. This position is expected to be 100% onsite. The selected candidate will be require

Lead Electrophysics Engineer Company: The Boeing Company Boeing Defense Space & Security (BDS) is seeking highly motivated Lead Electrophysics Engineer (Level 5) to support various programs located in Huntington Beach, CA, Seal Beach, CA , or El Segundo, CA . As a part of one or more Systems Engineering Integration & Test (SEIT) teams, you will provide technical engineering and program support, while serving as the core point of contact between your payload products and the broader system team. In this role you will serve as the technical owner for a range of RF related payload products, with an emphasis on system performance, integration, supplier technical management, and cross-organizational interface management. Your products will include both experimental and operational systems, extending through all lifecycle phases (early feasibility studies through operation and disposal). An ideal candidate will be highly motivated, with a strong technical background in RF and Radar systems, space environments, and RF payload integration onto air or space platforms. Position Responsibilities: Provide expertise over a broad range of radar related activities, including performance and trade studies of radar systems and architectures Oversee development and implementation of radar signal image processing techniques Perform system engineering and integration of Radar Warning Receivers (RWR) into various systems Developing Concept of Operations for the design and utilization of RF products Perform Mission Design and payload effectiveness analysis Lead technical teams, including subcontractors, to oversee hardware and processing

About us Graphcore is one of the world’s leading innovators in Artificial Intelligence compute. It is developing hardware, software and systems infrastructure that will unlock the next generation of AI breakthroughs and power the widespread adoption of AI solutions across every industry. As part of the SoftBank Group, Graphcore is a member of a best-in-class family of companies responsible for some of the world’s most transformative technologies. Together, they share a bold vision: to enable Artificial Super Intelligence and ensure its benefits are accessible to everyone. Graphcore’s teams are drawn from a diverse group of backgrounds and bring a broad range of skills and perspectives. A melting pot of AI research specialists, silicon designers, software engineers and systems architects, Graphcore enjoys a culture of continuous learning and constant innovation. Job Summary We are seeking a senior validation lead engineer to lead at-scale rack validation efforts for next-generation AI hyperscale systems. This role focuses on post-silicon system validation across the full lifecycle, ensuring functional, electrical, and thermal performance meets product objectives. You will own end-to-end blade and rack validation including planning, development, execution, and debug while collaborating across firmware, systems, and hardware teams. The Team The Rack Validation team is responsible for ensuring system readiness and quality at scale. The team works cross-functionally with firmware, silicon, and system engineering teams to validate complex AI compute platforms. Responsibilities and Duties Lead post-silicon validation of AI compute blades and racks including test planning, development, and automation. Drive provisioning and integration of system components (SoC FW, BMC, RMC, OS) for rack-level readiness. Own execution against program achievements and report validation progress and risks. Triage test failures, collect debug data, and collaborate on root cause analysis. Track

Senior Java Software Engineer – Developer Company: The Boeing Company The Boeing Company is looking for a Senior Java Software Engineer – Developer to join the Advanced Ground Architecture team located in Herndon, Virginia, Seal Beach, California, El Segundo, California or Colorado Springs, Colorado . This position will focus on supporting the Boeing Defense, Space & Security (BDS) Software Engineering organization. The Advanced Ground Architecture (AGA) software team is dynamic group of software engineers creating the future of Ground support with the extensibility and adaptability to be used across ALL Boeing programs. The software team is executing this vision through modern software technologies (Java, ReactJS, python, CI/CD pipelines) and methodologies (Scaled Agile). AGA is looking for self-motivated high performers to lead and execute the large scope of Java development needed for the program's vision. The ideal candidates will provide software engineering functions for the design, development, and maintenance of complex, multi-tiered application software systems used to support the command and control of space vehicles. The software engineers will work day-to-day with system and test engineers to implement, test, and document new features and improvements for both web services and applications supporting distributed computing solutions. Position Responsibilities: Develops software in conjunction with agile team leadership including participation at agile events Assists in the execution of DevSecOps processes to deliver software baseline on sprint boundaries. Participates in PI planning as an agile team member Engages with users and other engineers

Systems Engineer (Modeling & Simulation) (Associate or Mid-Level) Company: The Boeing Company Boeing Defense & Security (BDS) is looking for an Associate or Mid-Level Systems Engineer (Modeling & Simulation) (Level 2 or 3) to join our multi-disciplined engineering team in Albuquerque, New Mexico designing and developing advanced concepts on a DOD propriety program . This position will join a multi-disciplined team of engineers and scientists to develop and test advanced concepts for the Department of Defense. Work could include such things as image processing and analysis, radiometry, modeling and simulation, evaluation of field data to anchor models, and wherever the data may lead throughout the program. The ideal candidate will have strong MATLAB or Mathematic skills, an interest in data analysis; modeling and simulation; and some knowledge of optics and electro-optics. Position Responsibilities: Assists in developing and validating requirements for various electro-optical systems and components Uses data analysis results and output of mod/sim tools to assist in the development and validation of requirements for electro-optical systems, mechanical systems, interconnects and structures Works with engineering teams to collect and analyze data used to anchor models Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements Defines and conducts critical analyses of various kinds to validate performance of designs to requirements Defines and conducts tests to validate performance of designs to requirements and anchor models to fi

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

Lead Systems Integrator Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Lead Systems Integrator (Level 4) to support an Air Dominance Fixed Wing Proprietary Program in St. Louis, MO . Step into a fast-paced, cutting-edge program where your expertise will drive the design, integration, and testing of advanced, cloud-based systems that empower mission planning, debrief, and tactical Command & Control (C2) solutions for fixed-wing platforms. In this role, you will lead the development, analysis, and integration of innovative engineering solutions for critical Ground System capabilities and ensure seamless support for ground systems from initial design through to final delivery. You will partner closely with the team’s test lead as well as the overall chief integrator who oversees all activities related to design, integration, and test. You will work with a high-performing, cross-functional team in an agile environment, driving next-generation capabilities from design through delivery. This role offers the chance to innovate with open-architecture, model-based designs and collaborate across disciplines to support critical defense missions. You champion best practices, processes, and standards for the integration team, mentor systems and electrical engineers, and coach solution leads on execution. If you’re passionate about advancing mission-critical systems and thrive in a collaborative, fast-moving environment, this is your opportunity to make a significant impact. Position Responsibilities Lead team of systems and electrical engineers in behavior modeling and requirements decomposition for system, sub-system, and software design