Pre Sales Systems Engineer in San Francisco

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team The Agent Safety team works to ensure that increasingly capable AI agents act safely, exercise sound judgment, and remain aligned with user intent. Our mission is to reduce the probability of severe unintended outcomes from increasingly capable AI agents while preserving their ability to act effectively and autonomously. Our work spans three areas: Training: Create training methods, environments and data that teach agents to make better decisions in consequential situations. We turn real-world failures into training signals that prevent similar incidents, and identify precursor behaviors and mitigations to address emerging risks. Measurements: Build evaluations and production metrics that identify emerging risks and measure whether our interventions work. Oversight: Develop oversight and system mitigation mechanisms that reduce harmful actions while preserving useful autonomy (for example future versions of auto-review ). About the Role We’re looking for strong executors with excellent judgment, comfort with ambiguity, and an understanding of frontier model research. You don’t need prior safety or alignment experience, we also welcome people that recently realized that alignment and safety is a critical area to contribute to. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Train and evaluate frontier models to reduce harmful or misaligned agent actions, forming clear hypotheses and executing independently through ambiguity. Mine incidents and build scalable measurement, data-processing, and evaluation systems that turn real failures into repeatable safety signals. Collaborate closely with post-training, capabilities, oversight, and pre-training partners to ship research-backed mitigations into large-scale training and agent systems. You might thrive in this role if you: Have demonstrated strength in research engineering, ML en

About the Team The Product & Platform teams at OpenAI are responsible for delivering the company’s most impactful offerings—such as ChatGPT, our API platform, and new enterprise capabilities—to a global and diverse customer base. These systems must perform at scale and deliver exceptional experiences to developers, consumers, and businesses alike. The ChatGPT engineering org builds and operates the systems that bring product improvements to users across backend services, web, mobile, and desktop platforms. The Developer Velocity team partners with product engineering, platform, infrastructure, reliability, engineering acceleration, and observability teams to make everyday development faster and releases safer, more predictable, and easier to operate. About the Role We are seeking a Technical Program Manager to improve developer velocity and deployment excellence across ChatGPT. You will lead durable improvements to local development, CI, testing, build systems, release trains, progressive rollout, and post-deployment validation. You will identify the highest-leverage sources of engineering friction, align teams around shared standards and metrics, and drive adoption of tooling and workflows that improve both speed and reliability. This role combines systems thinking, technical program leadership, and hands-on operating rigor across a broad engineering surface. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Own the cross-functional roadmap for improving local development, CI, testing, build workflows, and release infrastructure. Create a durable intake and prioritization mechanism for developer friction, using evidence to focus teams on the highest-impact improvements. Lead programs that improve deployment speed and safety, including pre-merge confidence, progressive rollout, release guardrails, rollback readiness, and post-deploy valida

About the team Models are becoming increasingly capable—moving from tools that assist humans to agents that can plan, execute, and adapt in the real world. Mitigating the frontier risks resulting from these capabilities is paramount to OpenAI’s ability to continue deploying models safely. The Preparedness team is dedicated to addressing these critical risks. Our work includes: Measurement. Monitoring and predicting the evolving capabilities of frontier AI systems. Mitigation. Keeping misalignment safeguards, alignment tools, and on track to adequately address extreme threats that might arise in the future. Coordination. Setting mitigation targets by maintaining OpenAI’s preparedness framework , and partnering with other staff to achieve these targets. This is urgent, fast-paced work that has far-reaching implications for the company and for society. About the role Preparedness is hiring strong technical executors to support preparations for accelerated AI development, which may culminate in recursive self-improvement. This work relies on anticipating misalignment risks that might exist in the future, but might not exist now; so it’s especially important that people in this role are tasteful and strategic. The role is wide-ranging, covering any mitigation for loss of control risk, spanning the design and implementation of better pre-deployment risk-assessment , control measures , RSI-relevant training interventions, and turning one’s technical work into established institutional practices and external-facing communications. Below is a subset of our focus areas: Scalable oversight: Establishing practices for model misbehavior monitoring and oversight which remain effective in superhuman model capability regimes, with a focus on bridging from today’s monitoring approaches to future-proof ones. Automated auditing: As model capabilities increase, we’ll increasingly rely on automated approaches for finding the most severe forms of model misalignments. We’ll both need to s

About the Role The Mechanical Commissioning Project Engineer owns mechanical commissioning planning, readiness, quality coordination, and test execution oversight for the project. This role ensures mechanical systems are installed, inspected, started, balanced, controlled, and tested in a way that supports reliable integrated facility performance. Reports to the Commissioning Project Lead and partners closely with mechanical contractors, equipment vendors, design/engineering teams, the electrical commissioning lead, controls stakeholders, and vendor field/test engineers. Key Responsibilities Develop and maintain the mechanical commissioning scope, readiness criteria, inspection strategy, and discipline test execution plan. Review mechanical design packages, specifications, submittals, method statements, controls narratives, sequence assumptions, and testing requirements for commissionability and risk. Coordinate mechanical QA/QC inspections with contractors and vendor field/test engineers, including installation checks, pre-functional readiness, deficiency capture, and closeout tracking. Own mechanical commissioning procedure development and review, including equipment startup, functional testing, controls verification, balancing prerequisites, failure mode validation, and integrated systems testing inputs. Coordinate with equipment vendors on factory/site acceptance requirements, startup support, test prerequisites, documentation packages, and vendor participation during critical tests. Support readiness and execution for cooling, ventilation, hydronic, pumping, heat rejection, controls, and other project-specific mechanical systems. Lead discipline-level review of mechanical test results, deficiencies, corrective actions, retest requirements, trend logs, and acceptance evidence. Maintain mechanical commissioning dashboards and status inputs for the Commissioning Project Lead, including risk items, resource needs, test readiness, and issue aging. Partner with the E

About the Role The Electrical Commissioning Lead owns electrical commissioning planning, readiness, quality coordination, and test execution oversight for the project. This role ensures electrical systems are inspectable, testable, safe to energize, and ready for coordinated functional and integrated systems testing. Reports to the Commissioning Project Lead and partners closely with electrical contractors, equipment vendors, design/engineering teams, the mechanical commissioning lead, controls stakeholders, and vendor field/test engineers. Key Responsibilities Develop and maintain the electrical commissioning scope, readiness criteria, inspection strategy, and test execution plan. Review electrical design packages, specifications, submittals, method statements, sequence assumptions, and testing requirements for commissionability and risk. Coordinate electrical QA/QC inspections with contractors and vendor field/test engineers, including installation checks, pre-functional readiness, deficiency capture, and closeout tracking. Own electrical commissioning procedure development and review, including startup, energization readiness, functional testing, failure mode validation, controls interfaces, and integrated systems testing inputs. Coordinate with equipment vendors on factory/site acceptance requirements, startup support, test prerequisites, documentation packages, and vendor participation during critical tests. Support energization planning, switching and safety coordination, access sequencing, temporary conditions, witness points, and hold points. Lead discipline-level review of electrical test results, deficiencies, corrective actions, retest requirements, and acceptance evidence. Maintain electrical commissioning dashboards and status inputs for the Commissioning Project Lead, including risk items, resource needs, test readiness, and issue aging. Partner with the Mechanical Commissioning Lead on cross-discipline dependencies, including controls, life safety int

About the Team The Strategic Initiatives & Operations team is in need of a Technical Program Manager (TPM) to streamline our processes, including full safety governance and integration of various safety research and mitigations into our ChatGPT, API, and any frontier models. This role is critical for driving safe deployment of our new models, synthesizing inputs from multiple stakeholders, ranging across research, product, engineering, legal and policy, and ensuring all the risks are effectively and properly monitored, mitigated or resolved. About the Role As a TPM, you will be responsible for critical tasks ranging from tracking safety research progress and risk tables to overseeing the quality of human data campaigns – acting as the connective tissue to enhance the deployment of OpenAI’s safety system. Additionally, you will create and execute a compute roadmap for your team to ensure that our top priorities are resourced while taking advantage of new opportunities to make key safety research discoveries. Your primary focus will be to ensure our models are qualified for safe deployment. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Manage key risk areas and corresponding stakeholders. Keep track of a stack of existing and future mitigations for every major product and model deployment. Standardize the lifecycle of risk assessment, setting safety bars, consolidating inputs from multiple stakeholders across research, product, engineering, legal and policy, pre-launch safety reviews and post-launch followup. Manage pre-launch safety reviews. Share launch calendars and key safety practices and evaluations with our key parter (i.e. Microsoft). Develop comprehensive documentation for all the safety work, including metrics, evaluations, and progress tracking across multiple teams within OpenAI. Help with publishing and open sourcing safety

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role As a Supply Chain Program Manager, you will own material readiness and supply chain execution for critical hardware programs spanning custom silicon, systems, memory, storage, networking, and rack infrastructure. You will work cross-functionally with Engineering, Strategic Sourcing, Manufacturing Operations, Finance, Planning, Quality, and external suppliers to develop and execute scalable supply strategies that support aggressive product development and deployment timelines. This role requires deep understanding of hardware supply chains, material planning, NPI execution, supplier management, and operational scaling in constrained and rapidly evolving environments. In this role you will: Material Readiness & Supply Planning - Own end-to-end material readiness across NPI and production phases, including building the necessary framework and processes for enablement. Drive supply planning and execution for long lead-time and constrained commodities including ASICs, HBM, DDR, SSDs, networking, optics, power, thermal, and mechanicals. Build and manage material readiness plans aligned to proto/pre-EVT, EVT, DVT, PVT, and mass production schedules. Monitor supply health, lead times, inventory positions, allocation risk, and capacity constraints. Drive shortage management, allocation mitigation, and recovery planning. Coordinate supply commits, forecast alignment, and supply continuity planning with suppliers and manufacturing partners. Cross-Functional Program Ma

Who Are We? Postman is the world’s leading API platform, used by more than 45 million+ developers and 500,000 organizations, including 98% of the Fortune 500. Postman is helping developers and professionals across the globe build the API-first world by simplifying each step of the API lifecycle and streamlining collaboration—enabling users to create better APIs, faster. The company is headquartered in San Francisco and has offices in Boston, New York, Austin, Tokyo, London, and Bangalore - where Postman was founded. Postman is privately held, with funding from Battery Ventures, BOND, Coatue, CRV, Insight Partners, and Nexus Venture Partners. Learn more at postman.com or connect with Postman on X via @getpostman. P.S: We highly recommend reading The "API-First World" graphic novel to understand the bigger picture and our vision at Postman. The Opportunity Postman's websites are among the highest-leverage product surfaces we have. They are where developers, teams, and technology leaders first encounter Postman, understand the breadth of our product suite, find the right solution for their work, and decide how to engage more deeply. We are looking for a Staff Product Manager to define and lead the product strategy for Postman's web experience across postman.com and related properties. You will own the web as a customer-facing product and a business system: shaping the journeys people experience, expanding high-quality top-of-funnel discovery across our product portfolio, and building the technical and measurement foundation that allows us to learn and improve quickly. This role requires a strategic builder who can operate without a pre-existing playbook. You will make consequential prioritization decisions, turn ambiguous opportunities into a coherent roadmap, and lead across Product, Design, Engineering, Data, Product Marketing, Search Engine Optimization, Brand, and Growth. Your success will be measured by the outcomes the web