Rework Technician

The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. SUMMARY Follow the planned maintenance schedule for regular maintenance and repairs. Ensure timely repairs of equipment at the site, conduct regular inventory of spare parts for equipment failures that occur on site, and maintain a safe stock of spare parts on site. JOB DESCRIPTION Familiar with the company's site management system and has a good understanding of the electrical and structural principles of the company's products. After training, understands and masters the product commissioning procedures, and is familiar with various product installation, commissioning, and maintenance manuals. Proficient in various commissioning skills, such as software upgrades, parameter configuration, DMC/HVAC settings. Proficient in troubleshooting various types of faults, capable of independent problem-solving, and can resolve commissioning challenges based on on-site conditions. Strictly adheres to on-site maintenance safety requirements, proactively identifies and reports potential safety risks in the work. Upon arrival at the site, assesses the overall power station's operational status. Determines maintenance priorities based on the severity of the impact on power station operation. Complete work logs as required, categorizes and records faults, and describes the day's work content. Develop maintenance plans in advance and complete routine maintenance tasks on schedule. Plan spare parts inventory, set safety stock levels for vulnerable components based on project failure rates. Properly label faulty spare parts, records fault times, fault types, and power station numbers. Promptly provide feedback and actively repairs major and special maintenance issues, responds to customer complaints in a timely manner, and improves customer s

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Engineering Technicians to support the assembly, testing, and prototyping of custom electromechanical actuators for advanced robotic systems. You will build and test hardware from engineering drawings and procedures through inspection, troubleshooting, and rework, partnering closely with mechanical, electrical, manufacturing, and test engineers. These roles focus on hands-on work with precision electromechanical hardware, including stator prototypes, motor and actuator assemblies, and mechanical and electrical testing. You will help turn engineering designs into validated hardware while improving build records, work instructions, and repeatable assembly and test practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will: Each opening focuses on actuator builds, testing, or stator prototyping, with responsibilities aligned to the selected specialty. Actuator builds: assemble subassemblies and complete actuators from drawings, bills of materials, and work instructions, checking fit, orientation, torque, routing, and workmanship. Testing: set up and run established mechanical and electrical tests, confirm the setup against the procedure, record measurements, and identify unexpected results. Stator prototyping: support winding, insulation, termination, bonding, inspection, and rework using the selected build process and documented instructions. Troubleshoot build and test issues with engineers. Isolate problems through inspection and meas

Neptune Medical, is an innovative, venture capital funded medical device startup headquartered in Burlingame, CA. We have already commercialized novel medical devices using our technology. Now the team at Neptune is building something truly unique: a fully flexible medical robot that enables doctors to reach deep into human anatomy. Triton Robotic Endoscopy will disrupt flexible endoscopy and set a new standard in outcomes for decades to come. TITLE: Quality Technician POSITION SUMMARY: The Quality Technician will support manufacturing operations by ensuring in-process and finished medical devices meet established quality requirements, specifications, and regulatory standards. This role is responsible for identifying and documenting quality issues on the production floor, supporting investigations and root cause analysis, managing nonconforming materials, and collecting process and product data to drive continuous improvement. The technician works closely with Manufacturing, Quality Engineering, and cross-functional teams to ensure rapid response to quality concerns and compliance with applicable quality system regulations (e.g., FDA 21 CFR Part 820, ISO 13485). ROLES AND RESPONSIBILITIES Manufacturing Quality & Inspection Perform incoming, in-process, and final inspections of components, subassemblies, and medical devices in accordance with approved procedures, drawings, and sampling plans Ensure product compliance with specifications, GMP, and regulatory requirements Accurately document inspection and test results in device history records (DHRs) and other quality records Maintain traceability of materials and finished goods throughout production Nonconformance & Investigation Support Identify, document, and segregate nonconforming materials Support containment activities, including line clearance, product holds, and sorting/rework activities Assist in root cause investigations and corrective and preventive actions (CAPA) Collaborate with

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role We are seeking an Avionics Technician to support avionics manufacturing and integration in our Huntington Beach facility. You will build wire harnesses, assemble and test avionics subassemblies, and support integration into our final UAS products. This role requires strong electrical workmanship, attention to detail, and comfort working in a fast-paced, documentation-controlled environment. Key Responsibilities Fabricate wire harnesses (cut/strip, crimp, terminate, label, lace/overbraid as required) to workmanship standards Solder and rework electronic assemblies as needed, including PCBAs and connector terminations Modify and integrate COTS components per engineering instructions Read and execute work from controlled documentation (work instructions, drawings, schematics) with revision discipline Record build steps, inspection results, and traceability in the manufacturing execution system (MES) Flash/load and verify correct software/firmware configurations; document results Assemble, troubleshoot, and repair avionics stacks and related components Perform electrical and functional tests (e.g., continuity, insulation resistance, functional checks) and support integration into electromechanical assemblies Maintain tools and equipment, including c

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role As a Soft Materials Technician, you’ll fabricate, seam, assemble, and finish soft material structures that make up our unmanned defense systems. You’ll work with polymers, films, and fabrics, using welding equipment to create vehicles and subassemblies. You’ll support both rapid prototypes (where experimentation and iteration are essential) and production builds (where repeatability and precision drive mission success). You’ll work closely with engineers and fellow technicians to translate designs into reliable, lightweight, high-performance flight hardware. Key Responsibilities Seam, assemble, and finish soft material components using RF, hot air, impulse, and wedge welding processes. Fabricate vehicles and substructures from polymers, films, laminates, and coated fabrics. Set up, operate, and tune welding equipment to achieve consistent, high-quality welds across varying materials and geometries. Cut and trim welded assemblies to tight dimensional and quality requirements. Conduct in-process inspections of weld quality, seam strength, and dimensional accuracy; identify defects and rework as needed. Support prototype builds: adapting welding methods, experimenting with parameters, iterating with engineers, and documenting lessons learned.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples' lives. About the Role You will work at the cutting edge of OpenAI's robotics hardware, partnering with hardware and software teams to develop, build, test, and iterate on robotic systems. Working closely with engineers, you will build prototypes, execute experiments, fabricate fixtures, troubleshoot hardware, and help drive rapid iteration on new robotic technologies. Your practical problem-solving and technical judgment will help move projects from concept to reality. We are looking for versatile, hands-on generalists who enjoy solving problems across mechanical, electrical, fabrication, and experimental domains. The ideal candidate will have strong experience in high-velocity and early-stage hardware development environments, provide thoughtful feedback to engineering teams, and help improve both hardware and development processes. This role will help accelerate robotics development by enabling fast, high-quality iteration on new hardware concepts and systems. This role is based in San Francisco, CA, and is in-person 5 days a week. In this role, you will: Partner closely with engineers, researchers, and other members of the robotics team to support prototype development, experimentation, and hardware iteration. Build, modify, troubleshoot, and repair robotic systems and electromechanical assemblies spanning structural, electrical, sensing, and actuation subsystems. Design and fabricate fixtures, adapters, test equipment, and other prototype hardware that accelerate development efforts. Execute low-volume builds, engineering changes, and rework activities acro