Electronic System Design And Analysis Engineer Jobs

Electronic System Design and Analysis Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test Operations and Engineering (TO&E) team in Berkeley , Missouri is seeking an Electronic System Design and Analysis Engineer to join our Instrumentation Installation Design group to support all major programs in the St. Louis area. We are currently hiring for a broad range of experience levels including Experienced and Senior Electronic System Design and Analysis Engineers. Position Responsibilities: Electrical Design & Testing AC and DC power applications Assisting shop with build information Reading electrical drawings/schematics Troubleshooting Electrical component/wiring faults Production Functional and Environmental Acceptance Testing Designing new test sets for various weapon and aircraft electronics Performs system tests to verify operational and functional requirements Supports resolution of product integration issues and production anomalies Researches basic technologies for potential application to company business needs Assists in monitoring suppliers' performance to ensure compliance with requirements Develops or modifies basic hardware and software designs based on defined requirements Assists with the development and documentation of electronic and electrical system requirements This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skill/Experience): <

Lead Design and Analysis Engineer (Electrical Systems Design) Company: The Boeing Company Boeing is currently hiring for a Lead Design and Analysis Engineer located in Berkeley, MO to be a part of the MQ-25 Electrical and Equipment Installation team. The MQ-25 Stingray is a new autonomous, unmanned carrier based refueling air vehicle. The selected candidate will be a part of aviation history by helping our Navy customer productization Autonomous Carrier landing, takeoff and refueling capabilities. The MQ-25 program is currently building the Engineering and Manufacturing Development (EMD) vehicles for the Navy. Additional work is under way for the beginning of the Low Rate Initial Production (LRIP) program for additional vehicles. The MQ-25 Electrical & Equipment team is responsible for the power architecture & design, electrical equipment technical management, electrical installation design, wire harness design, and integrating avionics and other equipment into the vehicle. This role will be focused on the power architecture & design. Position Responsibilities: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. This position is expected to be 100% onsite. The selected candidate will be require

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Department Introduction The Systems Integration Group (SIG) develops advanced test solutions that support semiconductor manufacturing and product quality. The team partners across engineering, operations, procurement, and external suppliers to design, build, and deploy innovative hardware platforms that enable reliable testing and validation of semiconductor devices. Join the team building semiconductor memory test platforms for tomorrow’s AI infrastructure. Position Overview As an Electrical Design Engineer, you will design and develop electronic hardware used in advanced semiconductor test systems. You will apply electrical engineering principles to create analog, digital, and mixed-signal solutions that support manufacturing and product development. This role spans the full hardware development lifecycle, from concept and design through validation, deployment, and sustaining support. You will collaborate with cross-functional teams around the world to deliver reliable, high-quality test solutions. Responsibilities Design analog, digital, and mixed-signal electronic circuits from concept through implementation and validation Evaluate and select electronic components to meet system performance, reliability, and cost objectives Develop schematics and collaborate with PCB designers to create optimized board layouts Perform circuit simulation, analysis, and design verification using industry-standard tools Debug, test, and val

Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 3) to join our team in Huntington Beach or El Segundo, California. This position will be joining a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures Develops architectures to integrate systems and components into higher level systems and platforms Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements Defines and conducts tests to validate performance of designs to requirements Manages appropriate aspe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

Lead Analyst Company: The Boeing Company Boeing F-22 Mission Systems team is hiring for a Lead Analyst located in Berkeley, MO . As Lead Analyst, you will be responsible for analyzing engineering solutions for the F-22 Raptor, including both enhancing existing field units with the addition of new capabilities as well as architecting and testing completely new systems. In this role you will be joining a cross-functional team to progress our products through the development lifecycle. Position Responsibilities: Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Must be able to work in a fast-paced, collaborative environment, engaging with multiple teams and being responsive to agile requirements and critical path customer need dates. Collaborates with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system requirements for F-22 avionics sub-systems and weapon system architecture Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications in support of lab and operational environments Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a US Secret Security Clearance for which the US Government requires US Citizenship A final Secret Clearance

Experienced or Senior Digital Design Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) seeks a Digital Design Engineer to join our team in Huntsville, AL and play a vital role in the Patriot Advanced Capability-3 (PAC-3) program, one of the world's most advanced air and missile defense systems. This is your opportunity to work in a dynamic environment where your skills will directly contribute to protecting critical assets and ensuring mission success. If you are passionate about defense technology and want to make a real impact, we want to hear from you! Position Responsibilities: Design high speed digital circuits and perform signal integrity analysis Focus on electronic systems and electrical design, simulation and verification/validation testing of high-speed printed circuit boards (PCB) throughout full product development cycle Providing design guidelines and support for system architecture design, board layout, product bring-up, debug, validation, and factory builds This position requires obtaining a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. secret clearance Pre Start and final U.S. secret clearance Post Start is required. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 3 or more years of related work experience Experience in digital circuit design Preferred Qualificatio

Optical Engineer (Experienced or Senior) Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Experienced or Senior Optical Engineer (Level 3 or 4) to join our team at the Starfire Optical Range on Kirtland AFB in Albuquerque, New Mexico. The role supports the Air Force Research Lab in their advancement of Space Domain Awareness capabilities using ground-based telescopes. We are seeking candidates with experience in optical design, integration of optical systems, and field testing of systems. This position will work with extremely talented, high-performing, multi-disciplined engineering teams to work on state-of-the-art adaptive optics and optical imaging systems. Starfire Optical Range is a world class research facility with recognized achievements in adaptive optics, enabled by the quality, enthusiasm, and dedication of our entire team. Our team consists of engineers and technicians in all disciplines required to plan, design, integrate, and test complex optical, electronic, laser systems to achieve research objectives. Position Responsibilities: Oversee the design, fabrication, and integration of high-precision optical systems, facilitating the transition of conceptual opto-mechanical frameworks into functional experimental hardware Establish and validate technical specifications for optical systems and components to ensure adherence to performance standards Execute trade studies and simulations to optimize system performance and design Resolve complex optical challenges through innovative engineering and analysis Support project management by providing work

We're looking for a Senior Mechanical Engineer for Midjourney Medical — from precision electromechanical assemblies up to the large-scale structures and mechanisms that hold everything together and make it move. This role spans the full range of scale: one week you might be refining a compact transducer mount, the next you're architecting a structural frame or designing the motion system that positions hardware within it. This is a hands-on role on a small cross-functional team. You'll take problems from whiteboard sketch to working hardware yourself — designing in CAD, prototyping in the shop, testing, iterating, and integrating with research teams, electrical and software engineers along the way. We move fast and expect you to drive your own work: identifying what needs to happen next, making sound engineering calls without waiting for permission, and shipping hardware that works. What you'll do Own parts of the mechanical systems end to end — structures, mechanisms, and electromechanical integration Design large-scale structures: frames, weldments, enclosures, and support systems, with attention to stiffness, weight, manufacturability, and serviceability Design mechanisms: linkages, motion stages, actuation systems for precise, reliable positioning and articulation Integrate transducers, electronics, cabling, and thermal management into large physical systems Perform engineering analysis (tolerance stack-ups, structural/FEA, mechanism kinematics) to de-risk designs before committing to hardware Build and test relentlessly — 3D printing, rapid prototyping, and hands-on fabrication are core to how you'll validate designs Select parts and materials for system-level integration, balancing performance, cost, and lead time Drive projects independently from concept through validation, and collaborate closely with a small cross-disciplinary team to hit project goals What we're looking for Bachelor's degree in Mechanical Engineering or a related field 5+ years of experien

Experienced or Senior Digital CCA Design Company: The Boeing Company Boeing Defense, Space & Security (BDS) seeks a Digital CCA Design Engineer who is a subject matter expert in high-speed digital circuit design , signal integrity analysis , and electrical design to join our time in Huntsville, AL. This position will p lay a vital role in the Patriot Advanced Capability-3 (PAC-3) program, one of the world's most advanced air and missile defense systems. This is your opportunity to work in a dynamic environment where your skills will directly contribute to protecting critical assets and ensuring mission success. If you are passionate about defense technology and want to make a real impact, we want to hear from you! Position Responsibilities: Focus on electrical design, simulation, verification, and validation testing of high-speed printed circuit board design and electronic system Lead product development cycles Collaborate with cross-functional teams, including other engineering disciplines Keeping current on related industry best practices and technological advancements This position requires obtaining a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. secret clearance Pre Start and final U.S. secret clearance Post Start is required. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. 3 or more years of related experien

Job Details: Job Description: Intel India Customer Engineering Team is in a mission to create successful Original Design Manufacturers (ODMs) from India across their customer base. We are seeking a Hardware Board Design Engineer specializing in Power Delivery design and debug experience to help Intel customers design and debug their hardware platforms based on Intel Core and Atom CPUs. Qualifications: • Education : Bachelor's or Master's degree in Electronics/Electrical Engineering or related field • Experience : 7-12 years of industry experience (preferably 5-6 years designing and debugging hardware boards with Power Delivery focus using Intel Core/Atom CPUs) • Power Delivery Expertise : Deep understanding of system Power Delivery requirements and familiarity with Intel Core/Atom processor Power Delivery guidelines including IMVP specifications and PDN analysis • Circuit Design : Extensive experience with Buck, Boost, and Multi-phase Power Delivery Network design, including control loop understanding and very high current/low-voltage power delivery design • Design Tools : Proficiency in schematic capture using ind

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a PCB Layout Engineer to design high-density electronics for next-generation robotic systems. You will own PCB layout from floor planning through fabrication release, working closely with electrical, SI/PI, mechanical, and manufacturing teams. This role is based in San Francisco and requires in-person presence four days per week. In this role, you will: Own PCB layout, component placement, routing, and fabrication release for complex robotic systems. Collaborate with SI/PI engineers to refine layouts based on simulation results. Implement high-speed routing, controlled impedance, power distribution, decoupling, grounding, EMI/EMC, thermal, and mechanical-integration requirements. Work directly with fabricators and assembly partners to define stack-ups, establish design rules, drive DFM/DFA/DFT reviews, and close findings before release. Prepare fabrication and assembly documentation, including drawings, ODB++, drill files, stack-up tables, and manufacturing notes. Inspect newly received PCBAs and participate in board-level manufacturing failure analysis. Contribute to reusable design constraints and layout workflows, and maintain component-library assets such as symbols, footprints, and 3D models. You might thrive in this role if you: Have 6+ years of experience designing complex, multilayer PCBs. Are fluent in Cadence Allegro PCB Designer and Constraint Manager. Have strong HDI design experience, including fine-pitch BGAs, microvias, blind and buried vias, via-in-pad, and sequential lamination.

We are seeking a Manager of Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Supervisor and Engineering Lead on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, you will assist the team, as well as independently perform: engineering analyses, prepare bidding documents, plans, and specifications, and prepare material procurement and construction documents. In this collaborative environment, you will be working alongside project planning, environmental, permitting, and construction management. The position provides the opportunity for you to develop an engineering team with direct report responsibilities. While also being accountable for managing client relations, proposal development, scope creation, and project management. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. Location: This position is 100% REMOTE; preference is for candidate to reside in Texas but all candidates residing anywhere in the U.S. will be considered. The Challenge: Convey clear expectations, goals, and vision. Manage the performance of direct reports. Motivate, coach, and mentor skille

Electronic & Electrical System Design Engineer (Associate or Mid-Level) Company: The Boeing Company The Boeing Test and Evaluation (BT&E) organization is seeking an Electronic & Electrical System Design Engineer for the B-1 Bomber Avionics Integrated Support Facility (AISF) at Tinker Air Force Base, OK . The AISF Laboratory Operations Team is responsible for maintaining, configuring, and upgrading avionics hardware and special test equipment used to support development and testing of operational flight software. Other areas of responsibility include engineering and hardware sustainment that extends to multiple air force bases and labs across the United States. The AISF lab team plays a key role supporting the B-1 platform requirements in areas of avionics and weapons integration, by making changes in the lab first to ensure the software and hardware design are ready prior to ground and flight test. This engineering position is part of a small highly collaborative design team working multiple lab changes to satisfy customer requirements and ultimately the airmen who use the weapon system. This position is part of the Laboratory Operations team, comprising engineers, technicians, and cybersecurity professionals. BT&E is currently hiring for a broad range of experience levels including Associate or Mid-Level Electronic & Electrical System Design Engineers. Travel: This position will require occasional domestic travel up to 10% to support program objectives. Position Responsibilities: Design lab changes for new test articles and integration that support platform upgrades Design lab changes to existing systems to reso

F-22 Lead System Designer Company: The Boeing Company The Boeing F-22 Raptor team is seeking a Lead System Designer in Berkeley, MO to join the F-22 Raptor Mission System Design Team with a focus on developing cutting edge engineering solutions to continue to advance the world’s premier air superiority fighter, located in Berkeley, MO. The Lead System Designer will interact directly with customers, suppliers, partners, program management, integration, software, and test engineers. The selected applicant will be a member of a geographically dispersed, high-performing, collaborative team, and must be self-motivated with a strong work ethic, excellent time-management, and strong communication and interpersonal skills. The team operates in the Scaled Agile Framework (SAFe) to support all aspects of product development. The applicant will be expected to actively help the team to continuously improve and develop innovative and creative solutions to products and processes and to coach the team in system design best practices. Position Responsibilities: Collaboration with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system and software requirements for F-22 avionics sub-systems and weapon system architecture Resolve technical issues through coordination with engineering using established processes . . Manage Deliverables by defining plans for risk mitigation, issues, and opportunities; and, monitoring baseline plans to assess project performance, productivity, and lessons learned. Brief customer and program leadership on program status;