Manufacturing Engineering Supervisor Jobs

Our vision is to transform how the world uses information to enrich life for all. Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything from virtual reality experiences to breakthroughs in neural networks possible. We do it all while committing to integrity, sustainability, and giving back to our communities. Because doing so can fuel the very innovation we are pursuing. The TSE Technician – HBM Probe supports Test Solutions Engineering (TSE) activities for High Bandwidth Memory (HBM) products at wafer probe. The role executes operational, data, and system‑level tasks that enable efficient HBM probe evaluations, production releases, and yield/debug activities , working closely with TSE engineers across NPI and high‑volume manufacturing phases. This position is critical in supporting fast‑paced HBM development cycles where tight execution, data discipline, and cross‑functional coordination are essential. Key Responsibilities Support HBM probe activities by executing requests from TSE engineers, including: Evaluation and production lot assignment, tracking, and coordination Lot handling, status monitoring, and execution follow‑up Attribute tagging, traveler setup, and hold / release execution Support experiments and investigations related to: Yield improvement Test time optimization Test errors and probe‑related issues Perform data mining and generate reports with basic analysis to support: Engineering debug and root‑cause investigations NPI learning cycles and ramp readiness Production

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Our vision is to transform how the world uses information to enrich life for all. Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything from virtual reality experiences to breakthroughs in neural networks possible. We do it all while committing to integrity, sustainability, and giving back to our communities. Because doing so can fuel the very innovation we are pursuing. As the Global Facilities Regional Engineering I&C Engineer we are looking for someone to be responsible for providing technical support, expertise, and lead business process alignment on construction project design, management, schedule, cost control, testing & commissioning, and operational and maintenance programs for the facility systems. This includes I&C, SCADA, Life Safety system, Toxic Gas Monitoring, Telecom, Security, IoT systems at all manufacturing sites in your location / region. As a distributed team member residing in your current site/geography, you will represent all facility design standard alignment, construction project management, and O&M BKM alignment initiatives! You will also support the Global Facilities Central Engineering Team, Construction Team, Line Planning Team and O&M Team in providing critical design standard alignment, supplier quality improvement, operational and maintenance input, and support construction projects

About the Team DoorDash Labs is an independent team within DoorDash. We are working on building autonomous delivery robots from the ground up and other automation solutions as part of DoorDash's core delivery platform. If you have a passion for applying AI and robotics solutions in a service used by millions of people, then we want to talk to you! Please Note: This role is based in San Francisco, CA, and requires being in-person 5 days a week. About the Role We are seeking a master-level Prototype Machinist & Fabrication Specialist to join the Prototype Integration (PI) Team. This is a high-impact role designed for a "maker" with a deep technical pedigree in both traditional and cutting-edge manufacturing. You will be the primary resource for the engineering team, responsible for transforming complex designs into high-precision physical hardware. You are an expert in 5-axis CNC machining, CNC lathes, and manual machining, as well as a power user of a diverse 3D printing fleet. When not machining, you will serve as a Prototype and Integration Technician, helping the team assemble and troubleshoot the robotic platforms you helped create. You’re excited about this opportunity because you will… Operate and program 5-axis CNC machines, CNC lathes, and manual mills/lathes to produce high-tolerance prototype components. Oversee the daily operation, post-processing, and maintenance of 3D printing technologies including FDM, SLS, and SLA platforms. Design and fabricate custom jigs, fixtures, and specialized tooling to support complex assemblies and unique testing requirements. Interpret engineering drawings, blueprints, and CAD models to ensure all builds meet exact specifications. Provide feedback to Mechanical Engineers on Design for Manufacturability (DFM) to optimize part production. Perform preventative maintenance on all shop machinery and shop-specific equipment to ensure zero downtime. Manage inventory for machinist-specific consumables including cutting to

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What You’ll Do: As a strong AI and ML fundamentalist who is an expert at developing cutting-edge AI solutions to complex problems, you will develop code that eventually integrates into production and be responsible for: Design, implement, and evaluate novel machine learning and deep learning algorithms. Iterate on AI model development; starting from the data needed for training, architecture, input/output representations, evaluation, and deployment. Collaborate with other researcher engineers to prototype and validate complex solutions from academic literature. Conduct experiments to benchmark new techniques and evaluate model behavior. Develop tools and frameworks to support scalable and reproducible research and development. Communicate research findings to leadership in a concise, and convincing manner. Stay current with the latest developments in AI/ML and identify relevant innovations. Assist in transitioning research prototypes into production-ready systems. What You Need: M.S+ degree in Computer Science, or Computer Engineering with strong emphasis on AI and ML. Enjoys solving less-defined and complex problems Familiarity with good SW practices and development, including code quality, version control, etc. Very strong with ML frameworks such as Pytorch, or Tensorflow Good understanding of Tran

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What You’ll Do Design, develop, and maintain scalable full-stack applications that power core products and user experiences. Build and evolve frontend user interfaces alongside robust backend services and APIs. Develop cloud-native applications using modern frameworks, languages, and cloud platforms. Lead architectural design across the stack, ensuring systems are modular, performant, secure, and maintainable. Implement and manage infrastructure-as-code to provision and operate cloud environments. Collaborate closely with product managers, designers, and other engineers to define requirements and deliver end-to-end solutions. Own the full software development lifecycle—from design and implementation to deployment, monitoring, and maintenance. Conduct code reviews, promote engineering best practices, and mentor fellow engineers. Monitor application performance and reliability across frontend and backend systems, and troubleshoot production issues with effective debugging and root cause analysis. What You Need Bachelor’s, Master’s, or PhD in Computer Science or a related technical field, or equivalent practical experience. 7+ years of professional software engineering experience, with meaningful full-stack development experience. Strong proficiency in at least one backend language (e.g., Python, Java, Go) an

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What you’ll do: Lead teams to design and implement flight control algorithms for electric VTOL aircraft Work cross functionally to connect GNC requirements with other system requirements Influence leadership with decisions that are affected by GNC systems. Implement creative solutions to efficiently verify complex systems and software Build simulations to verify and validate system requirements Run trade studies to inform aircraft design and system architecture Work with the Flight Test team to design tests that safely evaluate the vehicle capabilities Improve the fidelity and capabilities of our vehicle and environment simulation models Analyze full-scale and subscale flight data to improve our models Author software requirements and test cases that drive the design of the GNC software Collaborate with Systems Engineering to properly decompose higher level requirements Collaborate with Systems Safety and Systems Engineering to identify and correct any deficiencies in the Flight Control System. What you need: Strong knowledge of vehicle dynamics, optimization, and both classical and modern control theory BS in Aerospace Engineering, Electrical/Computer Engineering, or a related field with at least 10 years of relevant experience OR MS with at least 8 years of relevant experience OR PhD with at

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What you’ll do: Perform trade studies, requirements derivation, and establish the overall vehicle configuration based on requirements Complete hand calc and FEM analysis of primary and secondary aerospace structures Develop company standards for model creation, strength checks, and analysis report generation Compile documentation of stress analysis to support release of engineering drawings and documents Work closely with and mentor designers and junior structural analysts in stress/stability/fracture analysis best practices Provide technical guidance on design concepts (risk vs. cost vs. performance) Perform stress analysis using Finite Element Methods for static, dynamic, fatigue, and/or damage tolerance to support program design, fabrication, testing, and/or structural integrity activities Support test execution and analyze test results to validate and verify that designs meet requirements and specifications Write detailed structural substantiation reports and other technical reports as required in order to obtain FAA airworthiness approvals What you need: 5+ years of experience with aircraft, spacecraft, launch vehicle or powertrain structures Bachelor’s degree in Engineering field, M.S. preferred Proven experience with stress, fatigue, and/or damage tolerance analysis on both metallic and/

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What you’ll do: Perform Simulation / Modeling of HV, LV, and communication EMC emissions and susceptibility Perform design for survivability under ESD and lightning strike Determine EMC filter designs and critical component specifications Work closely with mechanical, electrical, power, controls, and PCB engineers to meet EMC goals Work closely with vendors to realize EMC filter hardware Manage Y-capacitor budget allocations to optimize filter designs and to meet EMC emission targets as well as vehicle level SWaP-C goals Generate EMC test procedures, equipment list, setup EMC lab, and perform / document EMC test results Create and manage budgets for leakage resistance, Y-capacitance, and X-capacitance Lead module / subsystem / vehicle integration troubleshooting efforts What you need: BS Degree in Electrical Engineering with 11 years or MS Degree with 9+ years or PhD with 7+ years of experience in related fields Sound knowledge and hands-on experience in HV, LV, and communication bus architecture covering safety and functional requirements Familiarity with battery, power electronics, charging, and typical exposures anticipated for aerospace systems Experience in performing modeling of EMC systems in circuit simulation tools (spice, Matlab/Simulink, etc.) Familiarity with power electronic controls methods t

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What you’ll do: Lead the development of major structural airframe assemblies from preliminary design through certification, and manufacturing ramp up Prioritize task allocation to other team members to achieve the schedule milestones Apply in depth understanding of load paths, design best practices, and hand calcs to design robust structural configurations Apply design for manufacturing concepts to create designs that are cost effective and easy to fabricate at rate. Preferred experience with composite sandwich construction and adhesive paste bonding Develop company standards for composite and metallic part CAD models and drawings Work closely with and mentor other engineers on the design, stress and M&P teams Provide technical guidance on design concepts (risk vs. cost vs. performance) Support manufacturing to validate and verify that designs meet requirements and specifications What you need: 7+ years of experience with lightweight structures (aircraft, spacecraft, other high performance vehicles) Bachelor’s degree in an Engineering field Ability to design and analyze simple components A deep understanding of load paths and laminate design fundamentals Strong CAD skills in NX (preferred), Solidworks, Catia or Creo Familiarity with PDM systems Experience with the manufacturing of composite parts

What is JetZero ? Today’s aircraft contribute around 4% of global CO2 emissions, equivalent to the emissions of 200 million cars. This is only going to increase: Air travel is forecasted to double by 2050, while meaningful efficiency gains using current airplanes have hit a wall. JetZero is developing a b lended - wing body (BWB) aircraft . It uses up to 50% less fuel and will be built to accommodate zero-emission hydrogen propulsion. JetZero is the inevitable solution to sustainable air travel. The JetZero Team We are experienced aerospace professionals and engineers, excited about the future. That future will only be possible if we share our vision and what it means to people’s lives: carbon-free flight that ' i s better for both passengers and airlines around the world . What You'll Do: Define and maintain EWIS architecture, including wiring routing, separation, protection, and termination strategies. ​ Develop and manage EWIS requirements and compliance documents per FAA/EASA regulations. ​ Conduct zonal analyses to ensure segregation, redundancy, and safety compliance. ​ Support trade studies to optimize EWIS routing for BWB and nontraditional layouts, balancing weight, maintainability, and safety. ​ Collaborate with systems teams (avionics, electrical power, propulsion, environmental control, structures) for EWIS integration. ​ Coordinate with design teams on harness design, installation requirements, and connector selection. ​ Assist in developing EWIS design tools, digital mock-ups, and routing databases. ​ Prepare and present technical documentation for certification authorities and internal design reviews. ​ Provide support during manufacturing, installation, and testing phases. ​ What You Bring: Bachelor’s or Master’s in Electrical Engineering, Aerospace Engineering, or related field. ​ Experience in EWIS architecture development for transport or commercial aircraft. ​ Strong understanding of FAA/EASA Part 25 EWIS requir

The Senior Strategic Sourcing Manager will lead commercial strategy, advisory, and execution for all Zoox manufacturing projects. It will own Zoox manufacturing third-party relationships end-to-end to lead (i) competitive sourcing and negotiations, (ii) project execution, and (iii) ongoing performance of manufacturing suppliers. Finally, this role will support negotiation of capital equipment in the Zoox supply chain and also support future production strategizing. These activities ensure that Zoox’s manufacturing organizations can successfully and predictably produce complex systems at scale through world-class supplier relationships and cost structures. In this role, you will: Lead procurement and partnership initiatives for Zoox’s manufacturing organizations; build and maintain strategic relationships with key suppliers as the lead point of contact for all commercial topics Lead the day-to-day process of ensuring successful partnerships (milestone adherence, change order management, quality assurance, cost control, etc.) and build supplier performance assessments to support future sourcing decisions Proactively engage with Zoox stakeholders (incl. engineering, operations, manufacturing, strategy, finance, and design) to derive and execute the short- and medium-term business and technology roadmap to support Zoox’s vehicle assembly and service deployment Design, conduct, and synthesize supplier, industry, and market research; drive cost transparency and build total cost of ownership models to support sourcing decisions Ensure optimal contract coverage for the commodity/service in partnership with engineering and legal support Qualifications 8+ years of experience focused on commercial analysis and decisions Expertise in capital projects and equipment for hardware manufacturing/production Experience driving completion of complex projects with internal and external parties Ability to vi

Air Proprietary Tooling Engineer (Entry-Level or Associate) Company: The Boeing Company The Boeing Defense, Space & Security (BDS) team is seeking motivated Tooling Engineers located in Berkeley, MO . This role will support design, development, installation, and sustainment of production tooling and assembly aids used across manufacturing and maintenance programs. The role partners with manufacturing, quality, suppliers, and design engineering to deliver safe, compliant, and cost-effective tooling solutions that enable efficient production. At The Boeing Company, our mission is to connect, protect, and explore our world and beyond. Position Responsibilities Develop and qualify production tooling, jigs, fixtures, and assembly aids from concept through production release Translate manufacturing and design requirements into tooling specifications, drawings, 3D CAD models, and bill of materials Perform tolerance stack-up, fit checks, and tooling validation through analysis, prototyping, and hands-on trials Support tooling fabrication and inspection, including supplier management, fabrication oversight, and acceptance criteria verification Lead root-cause analyses for tooling-related manufacturing issues and implement corrective actions and continuous improvement Create and maintain tooling documentation: process plans, safety assessments, work instructions, inspection plans, and change records Collaborate with multidisciplinary teams—manufacturing, quality, stress, systems, and supply chain—to ensure tooling meets program schedule, safety, and quality goals Ensure compliance with company and regulatory standards, maintain configuration control and toolin

Chief Engineer - Patriot Advanced Capability (PAC-3) Company: The Boeing Company Boeing Defense, Space & Security (BDS) is searching for an inspiring and visionary Chief Engineer to lead groundbreaking engineering transformation for the PAC-3 Acceleration Efforts in Huntsville, AL . This pivotal role offers a unique opportunity to be at the forefront of accelerating production rates by driving innovative design for manufacturability and testability, optimizing production systems, and pioneering advanced engineering solutions that empower high-rate manufacturing success. As production demands soar, you will be the catalyst transforming engineering processes and production capabilities—ensuring we not only meet ambitious acceleration targets but also uphold Boeing’s renowned standards of quality and technical excellence. The Chief Engineer will serve as a strategic technical leader, spearheading engineering changes essential to unlocking higher production rates. You will collaborate seamlessly with engineering, manufacturing, quality, supply chain, and production teams to enhance product designs and processes geared toward efficiency, scalability, and continuous improvement. Position Responsibilities: Lead and champion engineering transformation initiatives to significantly accelerate PAC-3 production rates Drive and embed design for manufacturability (DFM), design for testability (DFT), and design for assembly (DFA) practices that enable smooth, high-rate production Partner closely with manufacturing and production teams to innovate and implement enhancements in production systems, tooling,

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Our Opportunity Summary: Our Facilities Engineering team designs, builds, and sustains the electrical infrastructure that keeps Micron's semiconductor manufacturing sites running safely and reliably. We partner with Facilities and Manufacturing teams through every phase, from design and construction to start-up, operations, and maintenance. Position Overview: As a Facilities Electrical Engineer, you will provide high-quality engineering services for planning, design, construction, operation, and maintenance of site electrical systems. These include low/medium voltage switchgear and distribution, power quality equipment, UPS systems, and generator systems. You will conduct capacity and scenario planning, evaluate the impact of changes, and ensure environmental, safety, regulatory, and code compliance. You will also help us bring AI and Agentic AI workflows into how we plan, design, and operate! (Disclaimer ) While you may not exhibit all of the characteristics/skills listed below today, we are highly interested in a team member who is anxious to grow in both technical breadth and depth. If you are open to learning from and being a valued member of a team of seasoned engineers, we are eager to help build on your existing foundation and expand your individual and collaborative skills in this exciting and unique opportunity. What’s Encouraged Daily: Design and specify low/medium voltage switchgear, power qu

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Drive yield improvement and process integration optimization through data-driven methodologies and AI-assisted analytics. Apply machine learning and AI tools to identify process excursions, defect signatures, yield detractors, and manufacturing risks. Develop predictive models for yield forecasting, defect prevention, and process stability monitoring. Leverage AI-powered data analysis platforms to accelerate root cause investigation and decision making. Collaborate with Data Science, Manufacturing, Equipment Engineering, and Product Engineering teams to develop and deploy AI solutions for semiconductor manufacturing. Support implementation of advanced process control (APC), Statistical Process Control (SPC), Fault Detection & Classification (FDC), and AI-enabled monitoring systems. Utilize Generative AI tools to improve engineering productivity, automate reporting, perform data summarization, and enhance knowledge management. About Micron Technology, Inc. We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all . With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucia