Mechanical R And D Engineer Jobs

We are seeking a highly experienced commissioning engineer in the Thermal Power industry to join our team in Korba. The ideal candidate will have extensive knowledge of Commissioning Boiler and Turbines Instrument, P&ID diagrams, design basis/criteria document, instrument list, and DCS graphics. The individual should also be familiar with power plant protection systems, vendor drawing review, interdisciplinary coordination, and mechanical package support. Additionally, the candidate should be able to effectively engage with OEMs, vendors, and project construction teams. This role presents an exciting opportunity for a seasoned professional to contribute to the success and growth of our organization. Source: Adani Group | Job ID: 45563

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

ABOUT THE ROLE We are seeking a detail-focused engineer to take the lead in ensuring technical documentation is clear, consistent, and accurate. This includes both creating and managing engineering documents. This role collaborates closely with the Mechanical Engineering, Industrial Design, Program Management and Quality Engineering teams to ensure appropriate product definition and design controls through 2D drawings and 3D CAD support for all phases of the product development lifecycle. YOUR DAILY IMPACT AT PELOTON Create technical 2D product drawings for all components and assemblies Provide CAD support to the Industrial Design and Mechanical Engineering teams Establish best practices for 3D and 2D CAD creation Create and manage Bills of Material (BOMs) in Windchill PLM Work with Hardware Engineering team to define engineering tolerances on drawings Coordinate cross departmental drawing and process reviews Review engineering drawings to ensure documentation consistency Stay current with the latest SolidWorks features and updates Support Solidworks deployment throughout company, including installation, upgrades Interface with Windchill PLM team to ensure seamless integration with Solidworks YOU BRING TO PELOTON 4+ years mechanical design experience and/or 6+ years of drafting experience BS in Mechanical Engineering, or equivalent Strong experience with consumer product design Proficiency in 3D modeling software (Solidworks preferred) Detailed-focused in drafting and reviewing drawings Knowledge of product life cycle management Spoken and written English Knowledge of ASME Y14.5 or ISO 8015, 1101 and 2768 drawing standards Proficiency in reading and applying GD&T BONUS Experience with Windchill as a PLM system Advanced 3D surfacing skills Experience working with contract manufacturers #LI-SD1 #LI-Onsite ABOUT PELOTON: Peloton (NASDAQ: PTON) provides Members with expert instruction, and world class cont

Work Flexibility: Field-based Associate Field Service Representative – Transport As an Associate Field Service Representative, you will play a key role in supporting a designated service territory along with repairing and delivering Stryker equipment with a focus on Transport solutions. You will work with a diverse range of products, including stretchers, transport chairs, bed frames, and temperature management systems. This position serves as an excellent opportunity to gain valuable experience and advance into a more senior ProCare role within Stryker. What you will do Possess basic electronic and mechanical aptitude. Perform all required quality control checks and preventative maintenance, global hold repairs, and wireless upgrades Utilize computer software to complete documentation, order parts, reference training materials, and more Present the highest level of customer etiquette in support of the sales team, and promote increased equipment and service usage by establishing and maintaining effective customer relationships Work mostly independently and engage in opportunities to support and collaborate with teammates across the business, including assisting on Field Service projects and initiatives Adhere to and maintain excellent Field Service metrics; not limited to but including hours and overtime accountability, inventory accuracy, cadence of documentation, etc. What you need Required: High School diploma. Must be at least 21 years of age to meet our driving requirements. Valid driver license in the state of residence with a good driving record as you will oper

About the Team DoorDash Labs is an independent innovation hub within DoorDash, focusing on developing automation and robotics solutions to enhance last-mile logistics. Our mission is to create technologies that support and augment human networks, aiming to improve efficiency for Dashers, merchants, and consumers alike. We are a highly senior team composed of former pioneers from a variety of different robotics industries. If you have a passion for applying AI and robotics solutions in a service used by millions of people, then we want to talk to you! Please Note: This role is based in San Francisco, CA, and requires being in-person 5 days a week. About the Role We are seeking a Senior RF Engineer to join our multidisciplinary team developing mission-critical RF/electrical systems for unmanned platforms.This role offers a rare opportunity to gain deep insight into RF design and validation, contributing across the full product lifecycle, from early concept and prototyping through production. In this role, you will apply deep expertise in electromagnetic theory and wireless system design to ensure autonomous platforms operate with exceptional reliability and precision. You will design, optimize and validate RF / mixed-signal PCBAs with a strong focus on interference mitigation, troubleshoot system-level desense, and leverage a thorough understanding of wireless technologies including LTE, 5G NR, Wi-Fi, GPS, and UWB. You’re excited about this opportunity because you will… Lead the development of innovative solutions that span across RF, Mixed signal and mechanical domain. Design RF hardware as well as wireless testbeds to support system validation, and lead the execution and documentation of system-level design and verification Provide expertise, mentorship to partner teams regarding EMI mitigation strategies, and cross-functional debug processes Characterize EMI caused by internal & external aggressors by tracing root causes using EMC probes

Interactive Design Engineer - HPIQ Description - About The Role As a Product Design Engineer at HP IQ, you’ll work at the intersection of creativity, engineering, and design to develop groundbreaking devices that redefine how people interact with technology. You’ll collaborate closely with industrial designers, hardware engineers, and interaction designers to transform ideas into functional prototypes and production-ready designs. From 3D CAD modeling and hands-on prototyping to engineering analysis and design validation, you’ll help solve complex mechanical challenges and drive designs from early concepts toward production. You’ll have the opportunity to take ownership of meaningful engineering work while learning from an experienced, multidisciplinary team and contributing to products that push the boundaries of what’s possible. What You Might Do Design mechanical parts, components, and assemblies for new consumer devices using 3D CAD (NX) Create detailed 2D engineering drawings, define specifications and tolerances, and work closely with overseas vendor partners to ensure accuracy and quality Design and run experiments, applying engineering analysis and test results to guide design decisions Evaluate materials, manufacturing processes, and design tradeoffs to develop robust and scalable solutions Work cross-functionally with hardware, software, industrial design, and other engineering teams to bring concepts from ideation through development Conceptualize, design, and build prototypes that quickly validate ideas Participate in design reviews, clearly communicating design decisions, technical analysis, and tradeoffs to both technical and non-technical audiences Build, test, troubleshoot, and iterate prototypes to identify issues and improve product performance, reliability, a

Product Design Engineer - HPIQ Description - About The Role As a Product Design Engineer at HP IQ, you’ll work at the intersection of creativity, engineering, and design to develop groundbreaking devices that redefine how people interact with technology. You’ll collaborate closely with industrial designers, hardware engineers, and interaction designers to transform ideas into functional prototypes and production-ready designs. From 3D CAD modeling and hands-on prototyping to engineering analysis and design validation, you’ll help solve complex mechanical challenges and drive designs from early concepts toward production. You’ll have the opportunity to take ownership of meaningful engineering work while learning from an experienced, multidisciplinary team and contributing to products that push the boundaries of what’s possible. What You Might Do Design mechanical parts, components, and assemblies for new consumer devices using 3D CAD (NX) Create detailed 2D engineering drawings, define specifications and tolerances, and work closely with overseas vendor partners to ensure accuracy and quality Design and run experiments, applying engineering analysis and test results to guide design decisions Evaluate materials, manufacturing processes, and design tradeoffs to develop robust and scalable solutions Work cross-functionally with hardware, software, industrial design, and other engineering teams to bring concepts from ideation through development Conceptualize, design, and build prototypes that quickly validate ideas Participate in design reviews, clearly communicating design decisions, technical analysis, and tradeoffs to both technical and

Position: Robot Operator (Glass Cleaning) Location: Bangalore Job Type: Full-Time Department: Operations Role Overview This role involves operating advanced robotic window-cleaning systems at residential, retail, office, and commercial locations. Candidates should be comfortable handling technology, performing basic troubleshooting, ensuring service quality, and interacting professionally with customers. Key Responsibilities • Operate robotic glass and window-cleaning equipment with proper safety procedures. • Perform routine maintenance, inspections, and basic troubleshooting. • Carry out manual touch-up cleaning whenever required. • Ensure high-quality service delivery and customer satisfaction. • Record job updates, customer feedback, and service issues through CRM systems. • Support customer engagement and identify opportunities for additional services. Required Skills & Qualifications • Tech-savvy with the ability to learn robotic operations and mobile applications quickly. • Basic mechanical aptitude and troubleshooting skills. • Good communication skills in English, Hindi, and Kannada. • Physically fit to handle equipment and perform occasional manual cleaning. • Customer-friendly attitude with strong service orientation. • Two-wheeler preferred for local travel (fuel allowance provided). • Prior experience in cleaning services, field operations, appliances, maintenance, or home services is an advantage. What We Offer • Competitive salary package. • Incentives on upselling and cross-selling opportunities. • Performance-based bonuses. • Professional training on robot operations, safety, and customer handling. • Uniforms, equipment, and consumables provided by the company. • Career growth opportunities into Senior Operator, Supervisor, and Technician roles. • Dynamic start-up environment with long-term career development. About the Company A Bangalore-based Robot-as-a-Service (RaaS) start-up delivering innovative automated cleaning solutions across B2B and B2C

ABOUT THE ROLE Peloton Electrical Engineers are responsible for the architecture, design, and testing of hardware systems for Peloton products. This early-career position requires working collaboratively with engineers and engineering managers to support product improvement and development initiatives across the entire product lifecycle, from new product introduction through sustaining engineering. As the team is highly dynamic with an exciting product roadmap, you will play a key role in ensuring electrical design robustness, manufacturability, time to market, and cost goals are all met. You will work multi-functional with many teams including Program Management, Product Management, Operations, Quality, Mechanical Engineering, Firmware Engineering, and Industrial Design. YOUR DAILY IMPACT AT PELOTON Under the supervision of senior engineers and project leaders, develop and support product subsystems, adhering to department and company standards and processes Observe and execute on engineering requirements rigorously Write and execute clear test plans at the design and production phases Troubleshoot and solve performance problems during development and in production Efficiently write and archive test reports Clearly document and communicate your work to senior engineers and technical leads Use data to drive engineering decision making Create and manage engineering changes for updates and improvements to existing products Collaborate with adjacent development teams to ensure design success, including compliance, firmware, and mechanical Work with drafting team to ensure appropriate product definition and design controls Communicate with outside vendors and partners effectively Travel throughout Asia and to/from the USA is expected to be 10%-15% YOU BRING TO PELOTON Bachelor’s degree in Electrical, Electronics, or Systems Engineering (Master’s degree preferred) Previous internship or similar work experience as an engineer in a design/develo

Job Title Biomedical Equipment Technician (Valhalla, NY) Job Description Support the Philips Multi-Vendor Services (MVS) business as a Biomedical Equipment Technician (BMET) for customers in the Valhalla, NY area. You will be responsible for customer relationship management through the effective use of technical knowledge to install, troubleshoot, service, and maintain equipment at customer sites. Your role: Perform and complete preventative maintenance (PM), Field Change Orders (FCOs), installations, and all related tasks independently, diagnosing and resolving electronic, network, and mechanical issues. Utilize service manuals, tools, training (on-the-job, manufacturer, 3rd party), support, resources, and escalation processes within required timeframes to resolve customer and system problems timely and effectively. Provide exceptional customer service by adhering to customer entitlements, setting clear expectations, and meeting commitments to address and resolve customer needs. Understand the customer's business and assess priorities communicated by site leadership. Actively participate as a member of the onsite work team; work to improve team processes and identify training gaps. Seek out opportunities to increase capability and capacity (i.e. may be required to become trained on a diverse range of equipment, learn new tools). Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, FCOs, PM, installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements. Shift time: Monday-Friday, 8AM-5PM. You're the right fit if: You’ve acquired 1+ years of experience in a medical servic

Flight Operations Mechanic Company: Boeing Defense, Space and Security (BDS) has an exciting opportunity for Flight Operations Mechanic to support a variety of programs in Berkeley, MO! Flight encompasses all of the duties of the following job classifications: Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight. Position Responsibilities: • Perform operational checkout of aircraft prior to and during preflight. • Inspect explosive and armament installations. • Maintain aircraft historical records. • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. • Inspect and/or perform bench and flight line operational checkout and inspect, troubleshooting, adjustment and repair of electrical and electronic systems. • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. • Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engin

Who We Are HP IQ is HP’s new AI innovation lab. Combining startup agility with HP’s global scale, we’re building intelligent technologies that redefine how the world works, creates, and collaborates. We’re assembling a diverse, world-class team—engineers, designers, researchers, and product minds—focused on creating an intelligent ecosystem across HP’s portfolio. Together, we’re developing intuitive, adaptive solutions that spark creativity, boost productivity, and make collaboration seamless. We create breakthrough solutions that make complex tasks feel effortless, teamwork more natural, and ideas more impactful—always with a human-centric mindset. By embedding AI advancements into every HP product and service, we’re expanding what’s possible for individuals, organisations, and the future of work. Join us as we reinvent work, so people everywhere can do their best work. About The Role As a Product Design Engineer at HP IQ, you’ll work at the intersection of creativity, engineering, and design to develop groundbreaking devices that redefine how people interact with technology. You’ll collaborate closely with industrial designers, hardware engineers, and interaction designers to transform ideas into functional prototypes and production-ready designs. From 3D CAD modeling and hands-on prototyping to engineering analysis and design validation, you’ll help solve complex mechanical challenges and drive designs from early concepts toward production. You’ll have the opportunity to take ownership of meaningful engineering work while learning from an experienced, multidisciplinary team and contributing to products that push the boundaries of what’s possible. What You Might Do Design mechanical parts, components, and assemblies for new consumer devices using 3D CAD (NX) Create detailed 2D engineering drawings, define specifications and tolerances, and work closely with overseas vendor partners to ensure accuracy and quality Design and run experiments, applying engineering ana

Job Title Field Service Engineer, Multimodality Imaging (Travel: Honolulu, HI) Job Description Allow your passion for improving lives to shine in this role where you’ll be responsible for customer relationship management through the effective use of technical knowledge to install, troubleshoot, service, and maintain equipment at customer sites. Considering candidates who are willing to relocate to Honolulu, HI. Your role: Provide exceptional customer service by adhering to customer entitlements, setting clear expectations, and meeting commitments and arrival times to address and resolve customer needs. Understand the customer's business and competitive environment; generate service revenue. Actively participate as a member of the regional work team; work to improve team processes and identify training gaps. Seek out opportunities to increase capability and capacity (i.e. may be required to become qualified in multiple modalities, learns new tools). Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, Field Change Orders (FCO), preventative maintenance (PM), installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements. Utilize tools, support, resources, and escalation processes within required time frames to resolve customer and system problems timely and effectively. Complete PMs, FCOs, installation and all related tasks (diagnose and resolve electronic, network, and mechanical problems). Approximately 70% travel across the specified geography is required. The average driving time is 1-4 hours daily. Occasional overnight stays and travel by air and/or train may be required. You're the right fit

Job Details: Job Description: As a Module Equipment Technician, you will play a vital role in ensuring the smooth operation of advanced manufacturing equipment used in semiconductor production. You will perform hands-on troubleshooting, maintenance, and calibration of electromechanical systems while supporting experiments and equipment modifications that drive cutting-edge advancements. Your work will directly contribute to enhancing equipment reliability and optimizing production efficiency, making an essential impact on Intel's manufacturing operations. Business Group Join Intel's Advanced Packaging Technology Development - Substrate and Wafer Assembly (ATPD: SWA) organization, a leader in delivering innovative and cost-effective substrate packaging solutions. This business group is focused on advancing Intel's capabilities in manufacturing technology to maintain competitive excellence across global markets. As part of this dynamic team, you will support critical equipment and collaborate on continuous improvement initiatives that align with Intel's broader mission of innovation and growth. Key Responsibilities Perform electrical and mechanical troubleshooting to diagnose issues with manufacturing equipment. Execute setup, calibration, corrective and preventative maintenance on production equipment, including wet chemistry, plating, and dry high-vacuum toolsets. Monitor tool performance and analyze data to identify and address equipment-related issues. Collaborate with engineering and support teams to improve equipment reliability and reduce downtime. Document maintenance activities, repair findings, and parts usage using established systems and procedures. Lead or contribute to continuous improvement projects, focusing on equipment optimization and yie

Job Title Field Service Engineer - CT/MRI (Field: Syracuse, NY) Job Description Allow your passion for improving lives to shine in this role where you’ll be responsible for customer relationship management through the effective use of technical knowledge to install, troubleshoot, service, and maintain equipment at customer sites. Your role: Provide exceptional customer service by adhering to customer entitlements, setting clear expectations, and meeting commitments and arrival times to address and resolve customer needs. Understand the customer's business and competitive environment; generate service revenue. Actively participate as a member of the regional work team; work to improve team processes and identify training gaps. Seek out opportunities to increase capability and capacity (i.e. may be required to become qualified in multiple modalities, learns new tools). Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, Field Change Orders (FCO), preventative maintenance (PM), installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements. Utilize tools, support, resources, and escalation processes within required time frames to resolve customer and system problems timely and effectively. Complete PMs, FCOs, installation and all related tasks (diagnose and resolve electronic, network, and mechanical problems). Approximately 70% travel across the specified geography is required. The average driving time is 1-4 hours daily. Occasional overnight stays and travel by air and/or train may be required. You're the right fit if: You’ve acquired 1+ years of experience in a diagnostic imaging (field or