Assembly And Test Npi Integrator in United States

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. As a Sr Design Engineer, you will work on design, simulation, and validation of next ‑ generation High ‑ Bandwidth Memory (HBM) architectures and circuit blocks. HBM requires advanced DRAM design knowledge combined with deep understanding of 3D stacked architecture, TSV signaling, wide I/O interfaces, PHY timing, power integrity, and system co ‑ optimization with GPUs/accelerators. This role sits at the intersection of DRAM design and high ‑ performance computing, enabling future AI/ML, HPC, and advanced graphics products. In this position, you will collaborate with Micron’s various design and verification teams all over the world and support the efforts of groups such as Product Engineering, Test, Probe, Process Integration, Assembly and Marketing to proactively design products that optimize all manufacturing functions and assure the best cost, quality, reliability, time-to-market, and customer satisfaction.

Manufacturing Test Engineering Manager Position Summary We are seeking an experienced Manufacturing Test Engineering Manager to lead the development and execution of the end-to-end manufacturing test strategy for next-generation AI server platforms and datacenter infrastructure. This role is responsible for defining and driving the manufacturing test architecture from L6 board assembly through L11 rack-level integration and final system validation , ensuring world-class product quality, manufacturability, and production scalability. This leader will manage a team of 3–5 Manufacturing Test Engineers while partnering closely with Hardware, Firmware, Platform, Validation, Quality, Operations, and Joint Design Manufacturing (JDM) partners. The role owns the manufacturing test strategy, test coverage, factory test infrastructure, manufacturing capacity planning, and continuous improvement of manufacturing quality. Key Responsibilities Manufacturing Test Strategy Define and own the end-to-end manufacturing test strategy from L6 board assembly through L11 rack integration . Develop standardized manufacturing test methodologies that optimize quality, throughput, cost of test, and scalability across multiple products and JDM sites. Establish manufacturing test standards, best practices, and engineering processes that support high-volume server manufacturing. Technical Leadership & People Management Lead, mentor, and develop a team of 3–5 Manufacturing Test Engineers supporting multiple hardware programs. Establish team priorities, allocate resources, and ensure successful execution of manufacturing test deliverables. Foster a culture of technical excellence, accountability, collaboration, and continuous improvement. Serve as the primary technical escalation point for manufacturing test and production issues. Cross-Functional Engineering Collaboration Partner with Hardware, Platform, Firmware, Validation, Reliability, Quality, and Operations teams to ensure manufac

GMD Sustainment and Repair Mod Tech Company: Boeing Aerospace Operations Boeing Global Services is currently looking for an GMD Sustainment and Repair Mod Tech to join their team in Fort Greely, AK. This position will support the Ground Based Mid-Course Defense (GMD) program. The GMD system is operationally capable to defend the homeland against long-range ballistic missile attacks. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Position Responsibilities: Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. Basic Qualifications (Required Skills/Experience): Minimum of 1 year experience with assembling, repairing, and testing mechanical and electrical components and systems Able and willing to travel up to 20% of the time domestically for offsite support and offsite training. Able and willing to ascend and descend ve

Entry-Level Electrical / Wire Harness Assembly Technician Company: Boeing is currently seeking Entry-Level Electrical / Wire Harness Assembly Technicians in Mesa, AZ . Fabricate, assemble, modify, repair, test development, production and prototype wire harnesses and electrical assemblies. Utilize the Boeing Quality management system to identify and document nonconforming detail parts, assemblies and processes. Work with support teams including engineering, material management, and quality to improve manufacturing processes. Fabricate, assemble, modify, repair, test development, production and prototype wire harnesses and electrical assemblies. Construct wire harnesses and panels by cutting, sorting, color-coding, measuring, stripping, crimping, soldering, routing, and inspecting various lengths, types, and gauges of wire, heat-shrink, and other related materials including use of ruler, scale, and other measurement devices to interpret lengths. Operate tools and equipment such as wire strippers, crimpers, solder iron, wire identification and cutting machines, heat guns, and associated tools. Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformance issues. Complete and maintain all required training and certifications needed to do your job efficiently. Maintain safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Knowledgeable and able to interpret blueprints, sketches, specifications and written or verbal instructions. Knowledgeable and skilled in electrical (wire harness) materials, fabrication and assembly methods and common shop practices. Knowledgeable and able to apply basic mathematics. Tr

This is where your work makes a difference. At Baxter, we believe every person—regardless of who they are or where they are from—deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job—you will find purpose and pride. Your Role: For us, working at Baxter is not just a job—it’s a calling. Our mission to save and sustain lives unites us. Thank you for contributing your talent to make a positive impact on millions of people around the world. We are driven not by what will be easy, but what will transform global healthcare for generations to come. Together, we create a place where we are happy, successful and inspire each other as we pursue rewarding careers. We’re grateful you’re interested in continuing your career journey with Baxter. This is where you can do your best work. Where your purpose accelerates our mission. What You'll Be Doing: Responsible for reading, understanding, and following assembly processes. Can assist in the setup of test equipment, leak tester and/or tensile tester, can leak test cuffs and run another test as required. Must be able to perform routine assembly operations, including soldering, using RTVS (room temperature vulcanization silicone), epoxie

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 122,000 colleagues serve people in more than 160 countries. JOB DESCRIPTION: Main Purpose of the Role Summarize the main purpose of the role Achieve the daily production, quality and safety commitments. Performs a wide variety of electronic, manual, mechanical or electromechanical assembly operations in assemblies or sub-assemblies. Organize and operate automatic or semi-automatic machinery. Main Responsibilities List the main responsibilities this role regularly performs. Assemble, repair, inspect and/or test products following defined manufacturing procedures. Operate a variety of machinery or manufacturing equipment following defined procedures. Adhere to quality and compliance company guidelines. Adhere and follow all safety guidelines including adequate use of personal protective equipment (PPE). Follow good documentation practices defined in operating procedures. Dispose of waste of toxic material in the corresponding areas. Train other employees, when necessary. Keeps all certifications of your position up to d

About Graphcore Graphcore is a global leader in artificial intelligence computing systems. We design advanced semiconductors and data center hardware that provide the specialized processing power needed to advance AI while improving the efficiency required for broad adoption. As part of SoftBank Group, Graphcore belongs to a family of companies developing transformative technologies. Our AI Engineering Campus in Austin plays an important role in building the hardware platforms that support the next generation of AI systems. The Opportunity We are looking for a recent graduate or early-career engineer to join the Mech/Thermal Platform team as a Graduate Mechanical Engineer. You will contribute to the mechanical design, thermal validation, and verification of advanced AI hardware and data center systems. You will work with experienced mechanical, thermal, hardware, and systems engineers throughout the development lifecycle. The role combines 3D computer-aided design, prototype evaluation, lab testing, data analysis, troubleshooting, and clear engineering documentation. What You Will Do Create and update mechanical parts, assemblies, and drawings using Creo or comparable 3D CAD software. Take ownership of defined mechanical design tasks from requirements and concepts through detailed design, review, release, and verification. Apply mechanical design, materials, manufacturing, heat transfer, and thermodynamics principles to engineering decisions. Develop mechanical and thermal test plans and procedures for prototypes and development systems. Set up and operate laboratory equipment, collect accurate data, analyze results, and document conclusions. Evaluate prototypes and identify mechanical, thermal, assembly, or manufacturability issues. Support design verification, troubleshooting, root-cause analysis, and implementation of verified design improvements. Maintain accurate engineering documentation, including design notes, drawings, test procedures, results, and change r

F-18 General Mechanic Company: Boeing Aerospace Operations Boeing Global Services is searching for F-18 General Mechanic willing to on 1st or 2nd shift at Naval Air Station (NAS) Joint Reserve Base (JRB) New Orleans in Belle Chase, Louisiana. This position is eligible for a Stipend payment in addition to salary for eligible candidates. Position Responsibilities: Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. General Mechanic: Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs coordinated combat turns and hot pit refuels. Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment. Uses technical data to diagnose and address maintenance problems on aircraft systems. Interprets and advises on maintenance procedures and

Experienced C-17 Product Repair/Modifications Technician Company: The Boeing Company Boeing Global Services is looking for an Experienced C-17 Product Repair/Modifications Technician in direct support of C-17 Globemaster III Integrated Sustainment Program. The position is located at Joint Base Lewis-McChord, Washington. Position Responsibilities: Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes Oversees assembly, disassembly or overhaul Configures aerospace vehicles and bench test equipment Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components Performs validation/verification testing of systems and components Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results) Inspects components and verifies repairs for flight worthiness requirements. Oversees training Works under general direction Basic Qualifications (Required Skills/Experie

Job Details: Job Description: As one of the world's largest semiconductor manufacturers, Intel is committed to advancing every aspect of semiconductor technology, from process development and manufacturing to advanced packaging and reliability characterization. Employees within Intel Foundry are part of a global network spanning technology development, manufacturing, assembly, test, and quality organizations across both front-end silicon and advanced packaging facilities. You will join the Foundry Lab Network (FLN), a key organization within Foundry Quality, Reliability, and Labs (FQRL), located at Intel's growing Chandler, Arizona site. This site serves as the technology development hub for Intel's most advanced packaging technologies, including Hybrid Bond Interconnect (HBI), Embedded Multi-die Interconnect Bridge (EMIB-T), glass substrates, Foveros, and future advanced packaging innovations. FLN is actively expanding its laboratory capabilities and capacity to support Intel Foundry's roadmap, enabling faster technology qualification and accelerating development cycles through Quick Turn Monitoring (QTM) solutions that significantly reduce time-to-data. As the Stress Test and Reliability (STaR) Back-End Laboratory Manager, you will play a critical leadership role within FLN. You will partner closely with Packaging Technology Development, Quality and Reliability, and Failure Analysis teams to establish and enhance laboratory capabilities that support qualification and certification of next-generation packaging technologies and products. This position offers a unique combination of people leadership, technical problem solving, and organizational strategy. You will lead a team of 7-10 talented engineers, spearhead cross-functional efforts to resolve complex reliability and technology challenges, drive strong quality and operati

F/A-18 Super Hornet Avionics Technician Company: Boeing Aerospace Operations Boeing Global Services is searching for a F/A-18 Super Hornet Avionics Technician to join the team at NAS JRB New Orleans in Belle Chasse, LA. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at NAS JRB New Orleans in Belle Chasse, Louisiana. This position may be required to work at Stennis Facility in Kiln, Mississippi as required Position Responsibilities: Technician maintains the following: Aircraft avionics/electrical and associated equipment Remove and install avionics/electrical and related components and gear Perform Daily, pre and post flight and periodic aircraft inspections. Perform flight operation activities to include daily, turnaround, launch and recovery including plane captain activities Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mecha

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role We’re looking for a product manufacturing & quality engineer, who will be responsible for driving technical initiatives related to the manufacturing, quality and reliability of our AI supercomputer hardware systems to ensure product success from concept to launch and through mass production. You’ll have the opportunity to coordinate with functional SMEs and work with a wide range of stakeholders, from design engineering and operations teams, TPMs, external industry vendors and partners to ensure that all products are developed and delivered on time and to the highest quality standards. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees In this role, you will: Own the integrated manufacturing and quality readiness for a product across L6, L10, and L11, with clear gates, milestones, deliverables, owners, and closure criteria. Lead readiness of process flows, tooling, fixtures, assembly operations, test interfaces, and production controls. Review and contribute to work instructions. Translate product requirements into qualification plans, process controls, test requirements and acceptance criteria with design engineering and Area SMEs Coordinate and drive execution of product and process qualification, reliability testing, and validation with the relevant SMEs. Maintain traceable evidence that assigned products and processes meet agreed performance, reliability,

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Department Intro: The Advanced Packaging Technology Development (APTD) department at Micron Technology is at the forefront of innovation, driving the advancement of memory and storage Interconnects and Packaging solutions that transform how the world uses information. Our team is dedicated to developing innovative processes and technologies that enable the creation of next-generation semiconductor products which drive the AI revolution. Position Overview: As a Staff Process Engineer in Advanced Packaging CMP team, you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. This position requires communication and collaboration with associates both within the region and internationally. Strict adherence to Micron Intellectual Property Protection policy is vital. This role will also extensively collaborate with vendors to develop processes that meet integration requirements. Responsibilities: Perform fundamental research, consumables development, and hardware evaluation, as well as test processes for novel applications Initiate and manage experiments to widen process margins and evaluate man