Electronic And Electrical System Design Engineer in Austin

1743 - This position is in Austin, Texas. Position Summary We are seeking an experienced Board-Level Hardware Validation Engineer to define and execute the validation and verification of complex electronic systems throughout the product lifecycle. This role is responsible for defining validation strategies, developing test plans, executing hands-on testing, analyzing failures, and working directly with ODM partners to ensure products meet performance, reliability, quality, and compliance requirements before mass production. The ideal candidate combines strong electrical engineering fundamentals with practical lab expertise and is comfortable personally performing validation activities while coordinating with cross-functional teams and manufacturing partners. Key Responsibilities Validation Strategy & Planning Define comprehensive board-level and inter-board validation plans based on product requirements, design specifications, and customer use cases. Develop validation methodologies covering functional, electrical, thermal, power, signal integrity, reliability, and stress testing. Establish test coverage, acceptance criteria, qualification requirements, and release gates. Review hardware architecture, schematics, component specifications, and interface topologies to identify validation risks early in the design cycle. Define incremental validation and regression coverage for component substitutions, design changes, and firmware updates. Hands-On Validation Execution Develop, automate, and execute validation tests on prototype and production-intent hardware. Perform board bring-up, functional verification, electrical characterization, and system-level integration testing. Validate communication interfaces, control signals, and timing requirements. Verify power sequencing, reset behavior, leakage current, and recovery across operating states. Execute temperature and voltage corner testing against approved operating limits. Use oscilloscopes, logic an

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer. Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardwar

Tenstorrent is leading the industry on cutting-edge AI technology, revolutionizing performance expectations, ease of use, and cost efficiency. With AI redefining the computing paradigm, solutions must evolve to unify innovations in software models, compilers, platforms, networking, and semiconductors. Our diverse team of technologists have developed a high performance RISC-V CPU from scratch, and share a passion for AI and a deep desire to build the best AI platform possible. We value collaboration, curiosity, and a commitment to solving hard problems. We are growing our team and looking for contributors of all seniorities. Tenstorrent is seeking a Signal Integrity Engineer to join our growing team. The ideal candidate will have a wealth of exposure designing high speed interconnects, breakout design, material trade-offs and verification. A background in electrical engineering, electronics or relevant fields is required. Must love all things high speed! This role is hybrid, based out of Santa Clara, CA or Austin, TX or Toronto, ON. We welcome candidates at various experience levels for this role. During the interview process, candidates will be assessed for the appropriate level, and offers will align with that level, which may differ from the one in this posting. Who You Are You have a Bachelor’s degree in Electrical Engineering (or equivalent) and 5+ years working in high-speed digital design with a focus in high-speed PCB or package design at 10Gbps and above (e.g. 100GbE, GDDR6, PCIe Gen5+). You’re comfortable working with high-speed performance metrics such as ICR, ERL, COM, NEXT, and FEXT as well as knowledge of high-speed connector technologies, including NPO, CPO, and emerging standards. You are proficient with PCB ECAD tools (ideally Cadence Allegro). You communicate clearly (written and verbal), think critically, and love solving complex signal integrity problems. You’re enthusiastic about all things high speed and enjoy collaborating acro

We are seeking a detail-oriented PCB Layout Engineer to maintain electronic component libraries and develop printed circuit board layouts. This role works closely with electrical engineering, mechanical engineering, procurement, and NPI to ensure component data and PCB designs are accurate, consistent, and ready for production. This position is in Austin, Texas. Key Responsibilities Create, verify, and maintain schematic symbols, PCB footprints, and associated 3D models. Validate component pin assignments, dimensions, land patterns, and library attributes against manufacturer documentation. Maintain library naming conventions, revision control, and component approval processes. Develop PCB layouts from approved schematics, including component placement, routing, stackup coordination, and design rule setup. Collaborate with engineers to address electrical, mechanical, thermal, and manufacturing requirements. Run design rule checks, resolve layout issues, and participate in design reviews. Prepare fabrication and assembly deliverables, including Gerber or ODB++ files, drill files, drawings, and pick-and-place data. Coordinate with PCB fabricators and assembly suppliers to resolve manufacturing questions. Support engineering changes and maintain accurate release documentation. Work with procurement and engineering to identify obsolete components and evaluate suitable alternatives. Required Qualifications Experience with setting up PCB design and electronic component library management. Proficiency in Cadence Allegro/OrCAD. Ability to interpret schematics, component datasheets, and mechanical drawings. Working knowledge of PCB fabrication, assembly processes, and design for manufacturability. Familiarity with relevant IPC standards for PCB design and component land patterns. Strong attention to detail, documentation skills, and ability to manage competing priorities. Experience with multilayer, high-density, mixed-signal, and high-speed PCB designs. Familiarity w

Tenstorrent is leading the industry on cutting-edge AI technology, revolutionizing performance expectations, ease of use, and cost efficiency. With AI redefining the computing paradigm, solutions must evolve to unify innovations in software models, compilers, platforms, networking, and semiconductors. Our diverse team of technologists have developed a high performance RISC-V CPU from scratch, and share a passion for AI and a deep desire to build the best AI platform possible. We value collaboration, curiosity, and a commitment to solving hard problems. We are growing our team and looking for contributors of all seniorities. Tenstorrent is seeking a SoC Physical Design Verification Engineer to drive full-chip signoff and ensure manufacturable, high-quality silicon across advanced technology nodes. You’ll lead physical verification closure (DRC, LVS, ERC, etc.), debug issues using standard industry PV tools, and collaborate across RTL, PD, CAD, and packaging teams to achieve successful tapeouts. If you thrive in a fast-paced environment and enjoy solving complex challenges in cutting-edge silicon, we’d love to hear from you. This role is hybrid , based out of Santa Clara, CA or Austin, TX or Fort Collins, CO. We welcome candidates at various experience levels for this role. During the interview process, candidates will be assessed for the appropriate level, and offers will align with that level, which may differ from the one in this posting. Who You Are A seasoned engineer with a strong background in CPU/IP/SoC physical verification and tapeout closure. A hands-on problem solver who excels at debugging and driving signoff through complex verification flows. A collaborative team player who works effectively across RTL, PD, CAD, and foundry interfaces. A mentor and technical leader passionate about building efficient, manufacturable silicon. What We Need BS/MS in Electrical/Electronics Engineering (or related) with 7–14 years of hands-on CPU/IP/SoC physical verif

Customer Quality & RMA Engineer Job Description POSITION OVERVIEW COMPANY OVERVIEW Infinitum Electric is a technology company pioneering the next generation of axial flux electric motors — lighter, more efficient, and more sustainable than conventional motor designs. Our motors are deployed in mission-critical applications for leading customers including hyperscale data center operators and industrial OEMs. As we scale rapidly in revenue, our Quality function is the backbone of customer trust and product integrity. POSITION SUMMARY The Customer Quality & RMA Engineer serves as the primary technical interface between Infinitum and its customers on all quality-related matters — including field complaints, warranty returns, RMA processing, corrective action management, and customer-facing quality reporting. This role owns the complete RMA lifecycle from customer notification through root cause resolution and verified closure, and is responsible for ensuring that every customer quality event is investigated with rigor, communicated with transparency, and resolved permanently. KEY RESPONSIBILITIES RMA Management & Field Complaint Resolution Own the end-to-end RMA process — from initial customer notification through receipt, inspection, root cause analysis, corrective action, and verified closure Triage and prioritize incoming field complaints and warranty returns based on customer impact, failure mode severity, and strategic account importance Conduct or coordinate physical inspection and failure analysis of returned motors and assemblies Maintain accurate, real-time RMA tracking data including cycle time, failure mode distribution, and cohort maturity trends Communicate RMA status, findings, and corrective actions to customers in a professional, timely, and technically credible manner Drive RMA rate reduction through systemic root cause analysis and closed-loop corrective action — targeting the structural elimination of recurring failure modes Custome

POSITION SUMMARY: Assists in analyzing specimens and maintains equipment in good operating condition. PRIMARY RESPONSIBILITIES: • Assist in testing of patient samples according to standard operating procedure. •Meet expected performance metrics within role as applicable. • Responsible for maintaining updated understanding and knowledge of methods performed in the lab • Provide guidance for new team members. • Follows GLP (good laboratory practice): maintain clean and organized workspace • Completes training and other deadlines on time. • Recognizes, escalates, and troubleshoot equipment malfunctions and common processing errors according to the laboratory’s standard operating procedures • Recognizes, documents, and escalates protocol deviations in lab to lead/supervisor • Communicates with team and other departments on various platforms (including via e-mail) • Provides feedback on day-to-day schedule and tasks to lead/supervisor • Assists teammates in completing daily tasks • Maintains equipment and instruments in good operating condition (such as calibration and expiration date) • Maintain sufficient inventory of material, supplies and equipment in the laboratory for performance of duties. • Participate in Continuous Improvement Projects (TAG, 5S) • Conducts himself/herself in a professional manner • Adheres to Departmental Expectations • This role works with PHI on a regular basis both in paper and electronic form and have access to various technologies to access PHI (paper and electronic) in order to perform the job • Employee must complete training relating to HIPAA/PHI privacy, General Policies and Procedure Compliance training and security training as soon as possible but not later than the first 30 days of hire. • Must maintain a current status on Natera training requirements. • Employee must pass post-offer criminal background check. • Performs other duties as assigned. QUALIFICATIONS: • BS/BA in a biological science or a related field • 0-2 y