Electronic And Electrical System Design Engineer in United States

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

NVIDIA has been transforming computer graphics, PC gaming, and accelerated computing for more than 25 years. It’s a unique legacy of innovation that’s fueled by great technology—and amazing people. Today, we’re tapping into the unlimited potential of AI to define the next era of computing. An era in which our GPU acts as the brains of computers, robots, and self-driving cars that can understand the world. Doing what’s never been done before takes vision, innovation, and the world’s best talent. As an NVIDIAN, you’ll be immersed in a diverse, supportive environment where everyone is inspired to do their best work. Come join the team and see how you can make a lasting impact on the world. Our team builds AI-driven software systems for Circuit Design: combining automation algorithms, DL models and agentic workflows to accelerate end-to-end design automation. Come join this integral team in our Circuit Solutions Group! What you'll be doing: Work within a multi-functional team on various projects involving Pre-silicon and Post Silicon custom circuit design and related data, Circuit/Layout Optimization and Spice correlation Research and implement techniques on frontier solutions of electronic design automation. Build and innovate agentic AI solution for VLSI design problem. Responsible for analyzing the problem or datasets, raise and validate hypotheses, design and build models and algorithm until they reach the desired QOR. What we need to see: MS (or equivalent experience) with 3+ years’ experience or PhD with 1+ years’ experience in Electrical/Computer Engineering degree Experience in the following fields is a strict requirement for this role: Combinatorial Optimization, Agentic AI and large language models, Machine Learning for Chip Design & EDA Experience in Algorithms/Data Structures/

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer. Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardwar

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a PCB Layout Engineer to design high-density electronics for next-generation robotic systems. You will own PCB layout from floor planning through fabrication release, working closely with electrical, SI/PI, mechanical, and manufacturing teams. This role is based in San Francisco and requires in-person presence four days per week. In this role, you will: Own PCB layout, component placement, routing, and fabrication release for complex robotic systems. Collaborate with SI/PI engineers to refine layouts based on simulation results. Implement high-speed routing, controlled impedance, power distribution, decoupling, grounding, EMI/EMC, thermal, and mechanical-integration requirements. Work directly with fabricators and assembly partners to define stack-ups, establish design rules, drive DFM/DFA/DFT reviews, and close findings before release. Prepare fabrication and assembly documentation, including drawings, ODB++, drill files, stack-up tables, and manufacturing notes. Inspect newly received PCBAs and participate in board-level manufacturing failure analysis. Contribute to reusable design constraints and layout workflows, and maintain component-library assets such as symbols, footprints, and 3D models. You might thrive in this role if you: Have 6+ years of experience designing complex, multilayer PCBs. Are fluent in Cadence Allegro PCB Designer and Constraint Manager. Have strong HDI design experience, including fine-pitch BGAs, microvias, blind and buried vias, via-in-pad, and sequential lamination.

Tenstorrent is leading the industry on cutting-edge AI technology, revolutionizing performance expectations, ease of use, and cost efficiency. With AI redefining the computing paradigm, solutions must evolve to unify innovations in software models, compilers, platforms, networking, and semiconductors. Our diverse team of technologists have developed a high performance RISC-V CPU from scratch, and share a passion for AI and a deep desire to build the best AI platform possible. We value collaboration, curiosity, and a commitment to solving hard problems. We are growing our team and looking for contributors of all seniorities. Tenstorrent is seeking a Signal Integrity Engineer to join our growing team. The ideal candidate will have a wealth of exposure designing high speed interconnects, breakout design, material trade-offs and verification. A background in electrical engineering, electronics or relevant fields is required. Must love all things high speed! This role is hybrid, based out of Santa Clara, CA or Austin, TX or Toronto, ON. We welcome candidates at various experience levels for this role. During the interview process, candidates will be assessed for the appropriate level, and offers will align with that level, which may differ from the one in this posting. Who You Are You have a Bachelor’s degree in Electrical Engineering (or equivalent) and 5+ years working in high-speed digital design with a focus in high-speed PCB or package design at 10Gbps and above (e.g. 100GbE, GDDR6, PCIe Gen5+). You’re comfortable working with high-speed performance metrics such as ICR, ERL, COM, NEXT, and FEXT as well as knowledge of high-speed connector technologies, including NPO, CPO, and emerging standards. You are proficient with PCB ECAD tools (ideally Cadence Allegro). You communicate clearly (written and verbal), think critically, and love solving complex signal integrity problems. You’re enthusiastic about all things high speed and enjoy collaborating acro

We are seeking a Manager of Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Supervisor and Engineering Lead on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, you will assist the team, as well as independently perform: engineering analyses, prepare bidding documents, plans, and specifications, and prepare material procurement and construction documents. In this collaborative environment, you will be working alongside project planning, environmental, permitting, and construction management. The position provides the opportunity for you to develop an engineering team with direct report responsibilities. While also being accountable for managing client relations, proposal development, scope creation, and project management. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. Location: This position is 100% REMOTE; preference is for candidate to reside in Texas but all candidates residing anywhere in the U.S. will be considered. The Challenge: Convey clear expectations, goals, and vision. Manage the performance of direct reports. Motivate, coach, and mentor skille

Test & Evaluation Lab Tech (Electrical/Electronic Equipment) Company: The Boeing Company The Boeing Company has an exciting opportunity for Test & Evaluation Lab Tech to join Boeing Defense, Space & Security (BDS) in Berkeley, MO. As a Boeing employee you’ll be part of a winning team that does great things every day BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: • Installing and maintaining Flight Simulation equipment consisting of computers, monitors, audio systems, visual systems, crew stations and rack equipment • Troubleshoot and resolve electronic hardware issues with minimum down time • Plans, conducts and documents tests on products, systems, components, materials, and manufacturing processes and technologies • Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies • Coordinates test requirements, determines test methods and capabilities • Conducts system test preparations by coordinating system integration, fabrication, modification, setup, checkout and tear-down • Troubleshoots and resolves laboratory and test-related problems • Coordinates test laboratory activities and maintenance and repairs • Coaches and trains others • Works under general direction </

Test & Evaluation Lab Tech (Electrical/Electronic Equipment) Company: The Boeing Company Job Description The Boeing Company has an exciting opportunity for Test & Evaluation Lab Tech to join Boeing Defense, Space & Security (BDS) in Berkeley, MO. As a Boeing employee you’ll be part of a winning team that does great things every day BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: • Installing and maintaining Flight Simulation equipment consisting of computers, monitors, audio systems, visual systems, crew stations and rack equipment • Troubleshoot and resolve electronic hardware issues with minimum down time • Plans, conducts and documents tests on products, systems, components, materials, and manufacturing processes and technologies • Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies <span style

Flight Operations Mechanic Company: Boeing Defense, Space and Security (BDS) has an exciting opportunity for Flight Operations Mechanic to support a variety of programs in Berkeley, MO! Flight encompasses all of the duties of the following job classifications: Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight. Position Responsibilities: • Perform operational checkout of aircraft prior to and during preflight. • Inspect explosive and armament installations. • Maintain aircraft historical records. • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. • Inspect and/or perform bench and flight line operational checkout and inspect, troubleshooting, adjustment and repair of electrical and electronic systems. • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. • Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engin

Flight Operations Mechanic Company: Boeing Defense, Space & Security (BDS) has a number of openings for Flight Operations Mechanics in Mascoutah, IL. Flight encompasses all of the duties of the following job classifications: Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight. Position Responsibilities: • Perform operational checkout of aircraft prior to and during preflight. • Inspect explosive and armament installations. • Maintain aircraft historical records. • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. • Inspect and/or perform bench and flight line operational checkout and inspect, troubleshooting, adjustment and repair of electrical and electronic systems. • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. • Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. • Install or replace r

Entry Level Test and Evaluation Technical Services Specialist Company: The Boeing Company Boeing Defense, Space and Security (BDS), division of Space, Intelligence, and Weapons System (SI&WS) seeks an entry level Test and Evaluation Technical Services Specialist to join the Production, Test and Launch (PT&L) organization located in Heath, Ohio (35 minutes East of Columbus, Ohio). The selected candidate will be responsible for supporting the Test Equipment Maintenance team in performing calibrations, repairs and preventative maintenance on test stations. Position Responsibilities Include: Maintain bench stock inventory, validate accuracy and correct entry into property system, perform inventory audits. Parts research as necessary to assist supplier management in obtaining correct item. Manage all parts ordered through the purchase request tool. Ensure accurate and timely delivery of parts, test equipment, and materials that meet the needs of the test equipment maintenance team. Utilize multiple supplier management systems. Ensure compliance to Electrical, Electronic and Electromechanical (EEE) parts requirements. Assign correct commodity codes. Attend regular meetings as a resource for information on current parts and equipment orders. Provide status updates and estimated costs as well as shipping and delivery dates. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is

Work Flexibility: Onsite Schedule - Friday–Saturday: 5:00 a.m. – 7:00 p.m. Sunday: 5:00 a.m. – 6:30 p.m. Important: Candidates must be able to attend Youniversity training on the weekday their first week. What you will do - As an Assembler I, you will assemble mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Under general supervision, assembles components that may include sub-assemblies, manual components and electrical components and all other related components to contribute to completion of a variety of products. Work from process work instructions and test procedures to complete tasks along with monitoring and recording related documentation to meet quality requirements Follow production build rates, schedules and meet required cycle times Assemble cartons and containers and prepare products for shipment in accordance with domestic, international and/or customer specifications Uses a variety of tools that may include, but are not limited to: manual and power hand tools, pneumatic tools, test equipment, presses, and measuring and cutting devices Responsible for set-ups, work preparation, clean up, and quality assurance of own work and work-area Meet work schedule and overtime requirements, including weekends Medium work: Exerting up to 50 pounds of force occasionally and/ or up to 20 pounds of force constantly to move objects What you need: Preferred Qualifications: High School or GED Manufacturing Experience $20.25/hr. &#43; $2.00 Shift Premium

Work Flexibility: Onsite As an Assembler III, you will perform assembly, testing, inspection, and documentation activities that support production goals, product quality, and operational efficiency. This role offers the opportunity to work across multiple production lines, utilize a variety of manufacturing systems and equipment, and contribute to continuous improvement initiatives. What You Will Do Assemble, install, rework, verify, test, and inspect mechanical, electrical, and sub-assembly components according to documented procedures. Follow work instructions, blueprints, and test procedures to ensure products meet quality and specification requirements. Complete required production documentation and maintain accurate manufacturing records in electronic systems. Monitor production schedules and achieve established build rates and cycle-time requirements. Utilize manufacturing software, electronic documentation systems, and other digital tools to support production activities. Participate in quality improvement, safety observation, and continuous improvement activities to support operational performance. Prepare products, cartons, and containers for domestic and international shipment according to established requirements. Maintain a clean, organized work area and perform setup, work preparation, cleanup, and quality checks for assigned operations. What You Will Need Required High School Diploma or GED equivalent 2&#43; years manufacturing experience Ability to work scheduled shifts and support overtime requirements, including weekends when needed. Role involves medium physical work, including lifting up to 50 pounds occasionally, prolonged standing and w