Engineering Architect in Berkeley

Senior Low Observables (LO) Mission Systems Integration Engineer Company: The Boeing Company The Senior LO Mission Systems Integration Engineer will lead design, integration, analysis, test, and production activities for low observable materials, structures, apertures, sensors, and radomes for mission systems. The role requires strong technical leadership, independent execution of complex tasks, advanced use of computational electromagnetic (CEM) solvers, and the ability to produce and defend technical results with minimal oversight. Key Responsibilities Lead design, modeling, and analysis efforts for LO materials, coatings, structures, and integrated mission systems to meet signature reduction and performance requirements. Independently apply CEM solvers (e.g., FEKO, HFSS, CST, WIPL‑D, xFDTD, or equivalent) to model antennas, apertures, radomes, and LO treatments; perform design optimization and trade studies. Drive integration of LO treatments with mechanical, thermal, and sensor/antenna system constraints; identify and mitigate producibility, testability, and sustainment risks. Plan, execute, and oversee laboratory and field tests (anechoic chamber measurements, antenna/radome characterization, RCS measurements); lead data collection, reduction, and validation activities. Develop and validate predictive models, reconcile simulations with measurements, perform uncertainty quantification, and provide actionable recommendations to engineering and program leadership. Produce high-quality technical documentation: test plans, test reports, technical memoranda, design reviews, and customer briefings. Mentor and provide technical oversight to junior engineers and technicians; ensure adherence to engineering processes, qual

Experienced Low Observables Mission Systems Integration Engineer Company: The Boeing Company We are seeking a Low Observables (LO) Design & Integration Engineer to support design and analysis activities for stealth/low-signature systems. The engineer will perform LO material and structure design, electromagnetic analysis, integration and test support, data processing, and technical reporting. The role requires practical experience with LO materials and technologies, solid electromagnetics knowledge, and hands-on expertise with computational electromagnetic (CEM) solvers used to design and optimize LO solutions. Key Responsibilities Perform design and analysis tasks for LO materials, coatings, treatments, and structural treatments to minimize radar, infrared, and other signatures. Develop and validate LO integration concepts for aircraft/vehicle structures and subsystems, including manufacturability and testability considerations. Use CEM solvers to model, simulate, and optimize LO components and systems (e.g., surface treatments, RAM, apertures, seams, RAM-structure interactions). Perform sensitivity studies and trade-offs across materials, geometry, and integration approaches to meet system-level LO requirements. Process and analyze measured test data from laboratory and flight/field tests; compare test results to simulation and iterate designs. Produce technical documentation: detailed analysis reports, integration guidance, test plans, and summaries suitable for engineering and program management audiences. Communicate technical results and recommendations to multidisciplinary teams and support design reviews. Support manufacturing and test engineering to ensure LO design intent is preserved through fab

Vehicle Management System (VMS) Hardware Engineer (Experienced) Company: The Boeing Company Boeing Defense, Space & Security (BDS) Flight Systems Engineering Capability is currently seeking an Experienced Vehicle Management Systems Hardware Engineer to join the Air Dominance Vehicle Management System (VMS), Hardware team located in Berkeley, MO. You will work across engineering disciplines to help us design elements of the Vehicle Management Systems (VMS) hardware. You will collaborate with our requirements and labs teams to implement and test your designs. Mechanical, Electrical, Aerodynamics, and other engineers are all welcome – to succeed in this role, you will need to leverage your area of expertise and quickly learn on the job about other areas to develop capabilities for our Vehicle Management System Computer. You will get to see tangible results of your efforts as you contribute to exciting aircraft development programs in St. Louis. Develops and documents moderately complex electronic and electrical s system requirements. Design hardware, and interfaces specifications. Test and validates to ensure designs meet operational and functional requirements Assist in monitoring supplier performance to ensure integration and compliance with requirements Solves problems concerning fielded hardware over the entire product cycle Researches specific technology advances for potential application to company business Analyze solutions to ensure ongoing operation of products thru life cycle Position Responsibilities: Lead requirements decomposition and traceability from customer need to testable design Develop, document,

Electronic System Design and Analysis Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test Operations and Engineering (TO&E) team in Berkeley , Missouri is seeking an Electronic System Design and Analysis Engineer to join our Instrumentation Installation Design group to support all major programs in the St. Louis area. We are currently hiring for a broad range of experience levels including Experienced and Senior Electronic System Design and Analysis Engineers. Position Responsibilities: Electrical Design & Testing AC and DC power applications Assisting shop with build information Reading electrical drawings/schematics Troubleshooting Electrical component/wiring faults Production Functional and Environmental Acceptance Testing Designing new test sets for various weapon and aircraft electronics Performs system tests to verify operational and functional requirements Supports resolution of product integration issues and production anomalies Researches basic technologies for potential application to company business needs Assists in monitoring suppliers' performance to ensure compliance with requirements Develops or modifies basic hardware and software designs based on defined requirements Assists with the development and documentation of electronic and electrical system requirements This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skill/Experience): <

Manufacturing Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test and Evaluation (BT&E) Test Operations & Engineering (TO&E) Instrumentation Data System Installation Design team located in Berkeley, MO is seeking Manufacturing Engineers to provision Flight Test Instrumentation hardware on multiple aircraft platforms. On this team, a Manufacturing Engineer (Assembly & Installation) has the primary responsibility for the fabrication and installation of the mechanical and electrical hardware required to install a flight test data system. Design-Build Flight Test Manufacturing Engineers work the entire production cycle from review of engineering, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing) and detail planning, and continuing on through installation planning and shipside support. Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements. Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to ensure fabrication meets design, test, and program requirements. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Manufacturing Engineers. Position Responsibilities: Synthesis of test hardware & instrumentation requirements in support of flight test Review of design models and drawings, creating/reviewing redlines and coordinating with design to incorporate updates Authorship of manufacturing plans to facilitate build

Ship Suitability Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Ship Suitability Engineer (Level 5) to support the Systems Engineering Integration & Test ( SEIT) Team in Berkeley, MO . Located within the BDS Air Dominance Systems Engineering core group in St Louis, Missouri supporting the Ship Suitability functions in the core and across individual programs. The candidate will support core efforts in development and maintenance processes and tools and will act as the “user/customer advocate” on naval programs to instill operational quality in Boeing’s products. The candidate will collaborate with Boeing Integrated Product Teams and the maritime customer, working to inform integration into the shipboard environment including approaches to launch and recovery, deck handling, communication modes with the ship, and shipboard qualification testing. The candidate will support engineering and test efforts on programs at the systems level by analyzing designs, participating in trade studies, designing/developing concepts, and assisting with drafting and executing test plans for air ship integration of weapons systems. The candidate will also lead and support training efforts to educate Boeing and customer engineers in naval aviation operations, procedures, equipment and environments pertaining to ship suitability. Training efforts may include, but are not limited to, classroom training at Boeing facilities and leading groups of engineers aboard ships at sea and land-based facilities. Position Responsibilities Applies an interdisciplinary, collaborative approach to lead activities to plan, design, develop and verify complex lifecycle balanced system of

Early Career Mechanical Design Engineer Company: The Boeing Company Boeing Test & Evaluation (BT&E) is looking for an Early Career Mechanical Design Engineer to support the Environmental Test Design Engineering team in Berkeley, MO. The primary focus of this position is to support St. Louis Environmental Lab testing for local Boeing Defense & Space (BDS) programs. The design team works in partnership with the lab test teams to provide the designs and hardware needed to complete testing. Test capabilities within the Environmental labs include vibrational/structural dynamics, acoustic, airflow systems, fuel flow systems, high temperature flow impingement, and environmental control chambers, where temperature, humidity, and pressure are varied. Mechanical Design Engineers on the team design and modify test articles, fixtures, and support structures that integrate with our lab facilities. Design work ranges from adapters and fixtures to full test rigs and complete aircraft subsystems with their support structures. Responsibilities include designing interfaces to facility infrastructure such as supplied pressure, heating/cooling, power, hydraulics, and a full suite of instrumentation. Design Engineers support fabrication, installation, connection, and acceptance/check-out to deliver test-ready hardware. Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. As part of this team, you will have the opportunity to work on the latest military aircraft and weapons programs such as T-7A, F-15, F/A-18, MQ-25, JDAM, SDB, in addition to Phantom Works proprietary efforts. Position Responsibilities: Develop mechanical design criteria from

Air Proprietary Tooling Engineer (Entry-Level or Associate) Company: The Boeing Company The Boeing Defense, Space & Security (BDS) team is seeking motivated Tooling Engineers located in Berkeley, MO . This role will support design, development, installation, and sustainment of production tooling and assembly aids used across manufacturing and maintenance programs. The role partners with manufacturing, quality, suppliers, and design engineering to deliver safe, compliant, and cost-effective tooling solutions that enable efficient production. At The Boeing Company, our mission is to connect, protect, and explore our world and beyond. Position Responsibilities Develop and qualify production tooling, jigs, fixtures, and assembly aids from concept through production release Translate manufacturing and design requirements into tooling specifications, drawings, 3D CAD models, and bill of materials Perform tolerance stack-up, fit checks, and tooling validation through analysis, prototyping, and hands-on trials Support tooling fabrication and inspection, including supplier management, fabrication oversight, and acceptance criteria verification Lead root-cause analyses for tooling-related manufacturing issues and implement corrective actions and continuous improvement Create and maintain tooling documentation: process plans, safety assessments, work instructions, inspection plans, and change records Collaborate with multidisciplinary teams—manufacturing, quality, stress, systems, and supply chain—to ensure tooling meets program schedule, safety, and quality goals Ensure compliance with company and regulatory standards, maintain configuration control and toolin

Cloud Infrastructure Administrator (Mid-Level, Senior or Lead) **Sign on Bonus Potential** Company: The Boeing Company The Boeing Company’s Specialized United States Infrastructure Operations organization is currently seeking a Cloud Infrastructure Administrator (Mid-Level, Senior or Lead) to join the team in Berkeley, MO; Seattle, WA; or Daytona Beach, FL . The Infrastructure team is seeking an experienced cloud infrastructure professional to help design, build, and sustain the foundational cloud environment supporting critical program needs. In this role, the selected candidate will help establish and operate secure, scalable, and resilient cloud infrastructure environments in Microsoft Azure to enable enterprise applications, software toolchains, and digital engineering workloads. As both an individual contributor and technical leader, this position will work across network, computer, storage, identity, security, and automation domains to deliver repeatable cloud infrastructure patterns and operational excellence. This role is focused on infrastructure operations, sustainment, automation, and reliability, rather than application software development. Position Responsibilities: Design, implement, and maintain Microsoft Azure-based infrastructure solutions including networking, compute, storage, identity integration, and supporting services Develop and maintain Infrastructure as Code (IaC) and configuration automation solutions using Terraform, Ansible, PowerShell, and Bash Implement cloud policies to enforce security, ensure regulatory compliance, and manage user access Build repeatable landing zones and cloud infrastructure patterns that support mul

Aerodynamics Engineer (Aero-Stability & Control Analyst) Company: The Boeing Company Boeing Defense, Space & Security (BDS) is hiring an Experienced or Senior Aerodynamics Engineer to perform propulsion system qualification support and analysis in the St. Louis, MO region ! Position Responsibilities: Performs aerodynamic/aerothermodynamics design and analysis of flight vehicles to ensure that the vehicle meets requirements Key contributor to developing new and improving existing technologies, tools and processes to enhance technology readiness, improve vehicle performance and reduce cycle time and cost Conducts, coordinates and/or develops test requirements to meet test objectives using established processes Assesses the impact of proposed regulations to determine the effect on cost, performance, producibility, maintainability and safety Supports certification and qualification processes of the aerodynamic/ aero thermal characteristics of flight vehicles Assists in training others Works under general supervision Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5&#43; years work-related experience with a Bachelors degree OR an equivalent combination of work-related experience and technical education. Preferred Qualifications (Desired Skills and Experience): (Level 4) 9&#43; years work-related experience w

Quality Engineer (Associate or Experienced) Company: The Boeing Company Boeing Defense, Space & Security (BDS) has an exciting opportunity for a Quality Engineer to join our dynamic team in Berkeley, MO. Position Responsibilities: Represents Quality function on team activities to integrate contractual and Boeing Quality Management System requirements into all aspects of proposals and program processes and documentation Provides Quality interpretation of requirements Develops quality metrics, design and production certification plans for small programs to ensure compliance with contractual, Company and regulatory requirements Conducts capability assessments and process validations to support supplier selection activities Participates in various reviews to ensure quality attributes are incorporated into product designs Performs analysis, tests and process audits to ensure manufacturing and test readiness Provides material review dispositions for non-conformances Conducts RCCA and CAPA activities Analyzes non-conformance trends to evaluate effectiveness of corrective actions Recommends corrective actions to address non-conformances Performs benchmarking and other forms of analysis to ensure specified processes capability levels are achieved Supports Advanced Product Quality Planning (APQP) activities Works under general direction Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer scien