Firmware Engineer Bios Uefi in San Francisco

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team The Consumer Devices team at OpenAI builds end-to-end hardware and software systems that bring AI into the physical world. We work at the intersection of custom silicon, embedded systems, operating systems, and cloud services to deliver reliable, production-ready devices at scale. About the role We are looking for an Operating Systems Engineer to build and harden the OS foundations for OpenAI products. We are especially interested in experienced, passionate, and innovative operating systems developers who thrive on building foundational platform software and solving hard problems in security, privacy, performance, power, and reliability. You will work across the OS kernel, core OS services, security and privacy primitives, performance and power, and the frameworks that connect applications and UI to the system. This role emphasizes deep debugging and systems ownership from development through production. You will collaborate closely with embedded, firmware, hardware, application, and product engineering teams. Experience with hardware bring-up is a plus, but not required. What you will do Work on end-to-end OS capabilities spanning the OS kernel, userspace services, application frameworks, UI toolkits, and application-facing APIs. Develop, integrate, and maintain OS components, both kernel-bound and in userspace, including scheduling, memory management, filesystems, drivers, IPC/RPC mechanisms, and security-relevant subsystems. Build and maintain core OS services and daemons (init, service management, device discovery, networking primitives, time, logging, update hooks, crash handling, and so on). Design and implement security and privacy mechanisms: Secure boot and measured boot integration points (where applicable). Mandatory access control and sandboxing. Secrets management, secure storage, key handling, and least-privilege service design. Privacy-preserving telemetry, data minimization, and user-consent oriented system behaviors. Establish a perfo

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role You will work on the systems software strategy and execution that brings new AI silicon from first power-on to a fully integrated system running production-representative models at expected functionality and performance. You will define how software exercises and validates compute, memory, interconnect, and I/O subsystems, then build the diagnostics, automation, and observability needed to find issues quickly. This role sits at the center of silicon, firmware, platform, systems, and workload teams. You will turn hardware specifications and performance targets into an end-to-end bringup plan, drive cross-functional debug, and establish the stress and regression infrastructure that makes each new platform reliable across operating environments. In this role, you will: Contribute to the end-to-end software bringup and validation strategy for new silicon and first-party systems. Define software-driven test coverage across compute, memory, interconnect, I/O, and their system-level interactions. Build diagnostics, test automation, telemetry, and regression infrastructure that accelerate first-silicon learning and issue isolation. Lead bringup from initial silicon arrival through board and system integration, docking, runtime enablement, and model execution. Design stress tests that characterize reliability, performance, and stability across workloads and operating conditions. Translate architecture specifications and performance models into measurable acceptance crit

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role We're seeking a Security Engineer to join our First-Party Hardware team. In this role, you will own the end-to-end security foundation for OpenAI's first-party AI hardware systems, working across hardware security, embedded security, system security, and practical deployment at data center scale. You will partner with silicon, hardware, firmware, infrastructure, manufacturing, operations, and security teams to define and deliver system-level device trust. This includes boot integrity, device identity, provisioning, attestation, management-plane security, storage encryption, debug controls, firmware update and recovery, RMA, and decommissioning. You will be accountable for turning threat models into requirements, requirements into implementation, and implementation into validation evidence that can support launch decisions. Location: San Francisco, CA (Hybrid: 3 days/week onsite) Relocation assistance available. In this role, you will: Own security requirements, threat models, validation strategy, and launch-readiness evidence for first-party hardware platforms from early design through production deployment. Design and review secure boot, measured boot, roots of trust, platform firmware resilience, firmware signing, recovery, and anti-rollback strategies across heterogeneous devices. Own device identity, provisioning, enrollment, attestation, certificate lifecycle, and key-management requirements across manufacturing and data center bring-up. Harden management

About the Team OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the Role We’re looking for an experienced systems software engineer to help define and build the host software stack for our custom next-generation AI systems. You will work close to the hardware on performance-critical software, including Linux kernel drivers, high-throughput I/O paths, and system-scale networking and RDMA. This role spans architecture, implementation, platform bring-up, debugging, and performance optimization. You will work across hardware and software boundaries to make new systems usable end to end, from low-level device interfaces through userspace tooling and production validation. In this role you will: Design, implement, and debug host-side systems software for AI infrastructure, including Linux kernel drivers and supporting userspace components. Build and optimize software paths for high-throughput, low-latency communication, including RDMA and related networking functionality. Develop software around PCIe, DMA, NICs, accelerators, memory movement, and device interaction. Bring up new hardware platforms and diagnose complex issues across kernel, firmware, networking, and hardware boundaries. Build tooling for integration, testing, diagnostics, observability, qualification, and performance characterization. Collaborate with hardware, networking, and platform teams to define interfaces and integrate new capabilities. Work with external vendors where needed to integrate technologies and drive issues to resolution. Contribute across the systems sof

About the Team OpenAI Consumer Devices is building the next generation of products that bring powerful AI into people’s everyday lives. Guided by OpenAI’s mission to ensure AGI benefits all of humanity, our team combines world-class researchers, engineers, designers, and operators who care deeply about creating useful, intuitive, and responsible technology. You’ll have the opportunity to work alongside exceptional people on ambitious, zero-to-one challenges at the intersection of hardware, software, and AI. This is a chance to help define an entirely new category of products—and shape how people experience AI in the future. The Systems Integration team is critical in this mission, turning complex hardware-software development into reliable product signals. We build the shared infrastructure, tooling, and lab environments that let teams test quickly, understand failures, and ship with confidence. About the Role As a Systems Integration Manager , you will lead the team responsible for device validation infrastructure, test automation, developer tooling, and lab operations. This is a player-coach leadership role: you’ll set technical and operational direction, build and develop a team of engineers and lab operations professionals, and stay close to the architecture and hardest systems problems. You will partner closely with device software, OS, firmware, hardware, reliability, QA, and release infrastructure teams to define validation strategy, improve release readiness, and ensure our test environments and quality signals scale with the product. Because this is a new category of devices, you’ll have the rare opportunity to build the validation foundation early—shaping the systems, standards, and operating model that will support products from prototype through launch. We’re looking for a leader who combines strong technical judgment with people leadership, operational rigor, and experience building reliable systems for complex hardware-software products. This role is b

About the Team OpenAI Consumer Devices is building the next generation of products that bring powerful AI into people’s everyday lives. Guided by OpenAI’s mission to ensure AGI benefits all of humanity, our team combines world-class researchers, engineers, designers, and operators who care deeply about creating useful, intuitive, and responsible technology. You’ll have the opportunity to work alongside exceptional people on ambitious, zero-to-one challenges at the intersection of hardware, software, and AI. This is a chance to help define an entirely new category of products—and shape how people experience AI in the future. The Operating Systems team is critical in this mission, turning sophisticated hardware and AI capabilities into a reliable, trusted platform. Security is central to that work: we define trust boundaries, integrate hardware-backed protections, isolate sensitive context, and establish the guardrails that let AI applications and agents act safely, privately, and under user control. About the Role We’re looking for a Software Security Architect to define the security architecture for OpenAI’s next-generation operating system. You’ll work alongside hardware security architects and partner with operating system, silicon, firmware, privacy, and product teams to protect users, their devices, and their data. This is a senior, hands-on role for someone who can connect operating system internals, hardware-backed security, and real-world product constraints. Your work will shape the platform’s trust model, protect sensitive information, and set the technical foundations for AI that is safe, private, and under user control. In this role, you will: Define the operating system’s security architecture, trust boundaries, privilege model, and protections for sensitive user data. Partner with hardware security architects to integrate roots of trust, secure elements, trusted execution environments, and processor security capabilities into the operating system. Desig

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.