Hardware Lead Engineer in United States

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the team: OpenAI’s Hardware organization develops AI-native silicon and system-level solutions for the unique demands of advanced AI workloads. Building on efforts like Jalapeño, the team is developing future generations of AI-native silicon and tightly integrated systems to power the next generation of frontier models. By co-designing chips, systems, tools, and methodologies, the team helps deliver faster, more efficient, and production-ready hardware for OpenAI’s supercomputing platform. About the role: We are seeking an experienced Optical Network Engineer to lead Laser related work within our optical interconnect efforts for large-scale compute systems. The role also requires broad, hands-on optical validation experience across IM/DD-based interconnects, working from lab characterization through production readiness and scaled deployment. In this role you will: Drive laser-focused requirements and technical direction within the broader optical interconnect roadmap. Lead evaluation and validation of optical components and subsystems, including laser-based elements, in lab and production-representative environments. Support end-to-end optical testing for IM/DD interconnects (e.g., module/system bring-up, characterization, debug, and readiness for scale). Work with external partners to align on development milestones, performance targets, and quality expectations. Own technical issue triage and resolution across performance, reliability, and manufacturability topics. Collaborate across internal teams to support integration, rollout, and operational success at scale. You might thrive in this role if you have: Strong experience in laser-focused optical engineering (development, validation, manufacturing readiness, or field support). Broad hands-on background with IM/DD optical technologies and optical test/debug workflows. Experience working with external suppliers/manufacturing partners and production-oriented execution. Demonstrated ability to debug complex t

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

Senior Software Engineer - Vehicle Health Management Company: The Boeing Company The Boeing Company is looking for Senior Software Engineer – Vehicle Health Management to join our Government Vehicle Health Management Systems (GHVMS) software team in Hazelwood, MO . This position in the Boeing Global Services (BGS) organization will primarily support Boeing Defense, Space & Security (BDS) Air Dominance programs. The Senior Project Engineer will lead the full lifecycle of embedded software development integrated within specialized devices and systems, ensuring compliance with industry, customer, safety, and regulatory standards. This role directs the translation of complex customer requirements into effective software designs, overseeing code reviews, system integration, and improving software efficiency and stability on specialized hardware. Serving as a technical authority, the engineer guides testing, debugging, and the adoption of emerging technologies, tools, and regulatory changes to advance product performance. Additionally, the position leads the evaluation and coordination of internal and supplier teams, ensuring adherence to project plans and quality standards while providing strategic oversight of embedded software project management activities. In GVHMS, we develop software that enables maintainers to keep military aircraft mission-ready and safe. As a software engineer on our team, you will create solutions that monitor and predict the health of aircraft throughout their lifecycle. Your solutions will be used to enable smarter maintenance decisions, automate processes, and reduce costs. You will also have the opportunity to develop with emerging technologies, such as AI, to advance our software capabilities and drive the future of predictive

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

Every day, tens of millions of people come to Roblox to explore, create, play, learn, and connect with friends in 3D immersive digital experiences– all created by our global community of developers and creators. At Roblox, we’re building the tools and platform that empower our community to bring any experience that they can imagine to life. Our vision is to reimagine the way people come together, from anywhere in the world, and on any device. We’re on a mission to connect a billion people with optimism and civility, and looking for amazing talent to help us get there. A career at Roblox means you’ll be working to shape the future of human interaction, solving unique technical challenges at scale, and helping to create safer, more civil shared experiences for everyone. As a Data Center Engineer , you'll help us scale our Core/Edge Data Centers and hardware infrastructure at a time of incredible growth for our business. At Roblox, you'll have boundless opportunities to shape the future of the Imagination Platform™ and demonstrate your passion for delivering thoughtful solutions in front of a global audience. If you know what it takes to build and operate hardware infrastructure that can sustain millions of concurrent players year-round and you take play as seriously as we do, you'll fit right into our highly experienced and ever-expanding engineering team. You will report to the Technical Lead Data Center Engineer. You will: Develop and maintain the Core/Edge Data Center and hardware infrastructure to meet the large scale and real-time requirements of our Imagination Platform™ to ensure our community has an awesome experience anywhere in the world. This includes all aspects of the server, network infrastructure, power, and environmental life cycles. Own efforts to track and mitigate systemic issues preventing hosts from returning to service. Identify and solve critical problems and prevent them from re-occurring via root cause analysis and giving rec

ABOUT BASETEN Baseten powers mission-critical inference for the world's most dynamic AI companies, like Cursor, Notion, OpenEvidence, Abridge, Clay, Gamma and Writer. By uniting applied AI research, flexible infrastructure, and seamless developer tooling, we enable companies operating at the frontier of AI to bring cutting-edge models into production. We're growing quickly and recently raised our $1.5B Series F , led by Altimeter Capital, Conviction Partners, and Spark Capital. Join us and help build the platform engineers turn to to ship AI products. At Baseten, we are building the global operating system for distributed, heterogeneous AI hardware. We believe that as LLM and multi-modal workloads scale, the network is the computer. We are looking for foundational engineers to lead our GPU Networking efforts, making RDMA a first-class building block in our infrastructure and unlocking the next generation of distributed inference optimizations. THE OPPORTUNITY Networking and compute are no longer separate disciplines; they are converging. The massive throughput of H100, B200, and NVL72 architectures enables and demands a new approach where communication is co-optimized alongside computation. We are entering an era where the network is an active accelerator, leveraging smart hardware offloads and direct interconnects to ensure that data movement operates at wire-speed. In this role, you will go beyond network configuration to architect the software fabric that unifies thousands of GPUs into a cohesive operating system. While you will leverage the best of the open-source ecosystem, you won't be limited by it. Where off-the-shelf solutions stop, you will build from scratch, engineering the primitives required to co-optimize communication and compute for Disaggregated Serving, Wide Expert Parallelism (WideEP), and lightening cold starts. WHAT YOU'LL DO Make RDMA First-Class: You will work on integrating RDMA/RoCE/InfiniBand capabilities directly into our inference stack,

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer. Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardwar

NVIDIA has been transforming computer graphics, PC gaming, and accelerated computing for more than 25 years. It’s a unique legacy of innovation that’s fueled by great technology and amazing people. Today, we’re tapping into the unlimited potential of AI to define the next era of computing. An era in which our GPU acts as the brains of computers, robots, and self-driving cars that can understand the world. Doing what’s never been done before takes vision, innovation, and the world’s best talent. As an NVIDIAN, you’ll be immersed in a diverse, supportive environment where everyone is inspired to do their best work. NVIDIA has a rapidly expanding ecosystem of data center platform designs. From single node HGX/DGX systems all the way up to large multi-node NVLink domain rack architectures. These designs have become core to NVIDIA's rapidly growing enterprise and cloud provider businesses. Each brings together the full power of NVIDIA GPUs, NVIDIA NVLink, NVIDIA InfiniBand networking, NVIDIA Grace CPUs, and a fully optimized NVIDIA AI and HPC software stack. We are searching for a highly motivated engineer to lead performance benchmarking and optimization efforts for our data center products. You will be instrumental in ensuring our data center solutions deliver industry-leading performance for accelerated computing workloads. What you will be doing: Design and execute comprehensive performance benchmarking strategies for our data center platforms and products Characterize real-world AI training, inference, and HPC workloads at scale Define, track, and report key performance indicators (throughput, latency, efficiency, scaling) Build automation tools and frameworks for performance monitoring and analysis Identify and analyze performance bottlenecks across compute, memory, network and storage subsystems Work closely with architecture, hardware,

About the Team OpenAI is building the infrastructure foundation for the next generation of AI. The Data Center Engineering team defines the strategy, reference architectures, technical requirements, and delivery standards for the large-scale data centers that support OpenAI research, products, and infrastructure partners. As a Data Center Infrastructure Electrical Engineer, you will help define, validate, and scale the electrical power systems that support high-density AI compute. You will translate evolving compute requirements into practical facility and rack-power architectures, evaluate new technologies and vendor solutions, and drive technical decisions across design, manufacturing validation, construction, commissioning, deployment, and operations. This role is best suited for a senior hands-on engineer with deep experience in mission-critical power systems, strong judgment under ambiguity, and the ability to connect facility infrastructure, hardware requirements, controls, telemetry, reliability, and operations. About the Role We are seeking a senior electrical infrastructure engineer to lead the development of reliable, scalable, and efficient power architectures for high-density, liquid-cooled AI data centers. The ideal candidate has strong practical experience with critical electrical systems at data centers or comparable industrial scale, including medium-voltage and low-voltage distribution, utility interfaces, backup power, UPS and battery systems, rack power delivery, grounding, protection, controls, and monitoring systems. You should be comfortable moving between long-range architecture, detailed engineering review, lab validation, vendor qualification, field deployment, and operational troubleshooting. Key Responsibilities Design and optimize electrical topologies and equipment strategies that reduce cost, accelerate schedules, improve efficiency, increase scalability, and maintain high reliability and maintainability. Review and develop basis-of-des

Work Flexibility: Onsite It's Time to Join Stryker! Stryker is seeking a Manager, Robotics Platform Development to lead a growing engineering organization supporting the development and evolution of complex robotic medical technology. In this role, you will lead a multidisciplinary team spanning electrical engineering, systems engineering, product safety, and engineering contractors. You will focus on people leadership, organizational scalability, and engineering execution , ensuring teams are appropriately staffed, supported, and positioned to deliver complex platform development commitments. You will partner closely with project management and senior technical leaders, helping translate program priorities into executable plans while enabling technical leaders to remain focused on architecture, systems strategy, and technical excellence. What You Will Do People and Organizational Leadership Lead, coach, develop, and engage a multidisciplinary engineering organization supporting complex robotic platform development. Establish clear performance expectations, provide actionable feedback, and support career and professional development. Lead a blended organization of full-time employees and contractors, including workload planning, onboarding, integration, and day-to-day coordination. Support staffing and organizational planning as program and business needs evolve. Build a collaborative, accountable team culture focused on execution, quality, and continuous improvement. Engineering and Program Execution Drive execution across complex hardware and systems development activities, ensuring teams have the resources, priorities, and support needed to deliver program commitments. Partner with project and progr