Hardware Operations Engineer in United States

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a TPM to drive development and integration of a range of sensor systems for robotics. This role will drive cross-functional alignment across requirements, engineering design, integration, validation, manufacturing, supply chain, and release processes, helping turn complex sensor-system needs into clear plans, decisions, and milestones. Location and in-person expectations: This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive requirements alignment across engineering design, integration, testing, and validation for camera modules, LiDAR, IMUs, RADAR, proximity sensors, audio components and the systems they interact with. Coordinate the integration of modules including electrical, mechanical, harnessing, and software interfaces with the full robotic system with deep understanding of timelines to drive the respective PCBAs, enclosures, build and test fixtures, connectors and cables. Establish effective cadences for technical reviews, BOM readiness, change management, production releases, approvals, and decision tracking. Align harnesses, fasteners, assembly fixtures, test fixtures, and documentation so cross-functional teams can execute against a clear plan. Lead validation planning around functional, reliability, NVH failure modes, including testing needs, schedules, and exit criteria. Partner with manufacturing and supply chain to manage handoffs, lead times, dependencies, and production readiness. Drive tradeoff decisions across cost, qua

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

About the Team The OpenAI Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role As a Senior Software Engineer, ML Systems & Training Infrastructure, you will be a deeply hands-on engineering force multiplier for the robotics team. You will help keep the training framework and surrounding infrastructure healthy, review and improve code quickly, debug failures across ML systems and infrastructure, and unblock researchers and engineers when the path from idea to working training job gets rough. We’re looking for people who love writing, reading, reviewing, and fixing code; who can get productive quickly in unfamiliar systems; and who bring strong practical judgment without a lot of ego or process overhead. This role will be based in San Francisco, CA and be expected in office 5 days per week and offer relocation assistance to new employees. In this role, you will: Review, improve, and clean up code across training frameworks and adjacent infrastructure. Identify risky or low-quality changes before they land, and raise the code quality bar without slowing the team down. Debug issues across ML training systems, GPUs, clusters, networking, and related infrastructure. Help researchers and engineers unblock broken training jobs, flaky workflows, and brittle internal tooling. Improve the reliability, maintainability, and usability of the robotics team’s training framework. Move quickly on practical engineering problems that directly affect team velocity. You might thrive in this role if you: Have strong software engineering fundamentals and excellent code review judgment. Have experience with ML systems, training fr

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Lead Robotics Safety Engineer to define and lead the product safety strategy for our robotics program. You will work closely with leadership, engineering, research, legal, and policy teams to ensure safety is integrated into our products from the earliest stages of development through deployment. This role combines product safety, regulatory strategy, systems engineering, and risk management. You will help shape how we think about safety across robotic platforms, influence product architecture and development decisions, and ensure our systems are designed to meet both current and emerging regulatory expectations. You will serve as a subject matter expert on robotics safety standards, regulatory frameworks, and safety engineering practices while helping establish the long-term safety strategy for our products and organization. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will Define and lead the product safety strategy for robotic systems across the development lifecycle. Monitor and influence emerging regulatory frameworks, industry standards, and policy developments relevant to robotics and autonomous systems. Partner with engineering teams to translate safety requirements into product architecture, design decisions, and engineering requirements. Develop and maintain system-level hazard analyses, risk assessments, and safety cases for robotic products. Establish safety requirements, verification strat

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

About the Team The OpenAI Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role As a Software Engineer, Distributed Data Systems, you will design, build, and operate some of the largest distributed data systems in the world. You will be responsible for the end-to-end stack to deliver and consume top-quality data for robotics training at exabyte-scale. You’ll manage distributed data pipelines, collaborate closely with researchers to translate requirements into robust systems, and harden pipelines that serve as the backbone for OpenAI’s rapid iteration cycles. We’re looking for engineers who are detail-oriented, have strong experience with distributed systems, and excel at building reliable, large-scale systems in high-stakes environments. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Design, build, and maintain data infrastructure such as exabyte-scale distributed data processing, data selection, automated labeling, and training data loaders. Ensure our data platform can scale by orders of magnitude while remaining reliable and efficient. Partner with researchers to deeply understand requirements and translate them into production-ready systems. Harden, optimize, and maintain critical data infrastructure systems that power multimodal training and evaluation. Deliver the best possible data for training robotics models. You might thrive in this role if you: Have strong experience with distributed systems and large-scale infrastructure with a strong interest in data. Are detail-oriented a

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About Role We're a growing hardware company. As we scale, we also need a supply chain that evolves and stays nimble to the changing shape and direction our engineers designs. Today we need someone who understands the iterative process of R&D but is also ready to expand into new product introduction (NPI), and after that, high-volume manufacturing. We're hiring for where we're headed, not just where we are today. This role prioritizes judgment, adaptability, and analytical ability over years of experience alone. A strong candidate will be able to reason from first principles, quickly develop expertise in new commodities, and identify potential commercial or technical issues before they affect the program. While extensive tenure is not required, this is not an entry-level position; candidates should have a solid foundation in strategic sourcing, supplier management, and hardware manufacturing. Over time, you'll help us build out a full supply chain organization: buyers, global supply managers (GSMs), contract manufacturing leads, and specialists across categories like precision machining, gears and mechanical components, EMS/PCBA, electrical components, and contract/JDM manufacturing. Where this role goes - into a specific commodity, into people management, into ops - will depend on where you're strongest and where the business needs you most. This role is based in San Francisco, CA and requires in-person presence 4 days a week and up to 30% travel to vendor sites. In this role you will: Partner directly with engineering during R&

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are hiring a Sim Infrastructure Engineer to turn simulation systems into reliable, automated, production-quality pipelines that power model training, evaluation, and hardware-in-the-loop validation. This role owns the automation, orchestration, and tool integration that apply simulation to concrete robotics tasks: building CI/CD for SIL/HIL, presubmit checks, automatic model evaluation, metric computation and reporting, and the runtime infrastructure to run simulations at scale. You will collaborate closely with Sim Realism, Sim Environments, Research, and Ops to make simulation an integrated, reproducible, and measurable part of our ML and robotics workflows. This role is based in San Francisco, CA, and requires in-person 4 days a week. In this role, you will: Build and maintain presubmit checks, continuous integration and deployment pipelines for simulation code, environments, and tasks so simulation artifacts are testable, versioned, and reproducible. Implement end-to-end automation to run model evaluation in sim (SIL) and orchestrate HIL runs; compute realism and task metrics, generate dashboards and alerts, and ensure evaluation is repeatable and auditable. Create robust APIs and connectors so research, training, and data-collection systems can schedule, seed, and evaluate batches of simulations; support RL rollouts, imitation-data collection, and presubmit model checks. Build scheduling, batching and orchestration for running very large numbers of concurrent rollouts (target tens of thousands of rollouts / large RL workloads), sol

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We’re looking for a GPU Inference Engineer to contribute to improvements in model serving efficiency for our Robotics research. This is a high-impact role where you’ll drive initiatives to optimize inference performance and scalability. You’ll also be engaged in model design, to help assist our researchers in developing inference-friendly models. This role is critical to scaling the team’s broader goals - it will directly enable leadership to focus on higher-leverage initiatives by building a stronger technical foundation. In this role you will: Perform engineering efforts focused on improving model serving, inference performance, and system efficiency Drive optimizations from a kernel and data movement perspective to improve system throughput and reliability Partner closely with research and product teams to ensure our models perform effectively at scale Design, build, and improve critical serving infrastructure to support Robotics growth and reliability needs You might thrive in this role if you: Have deep expertise in model performance optimization, particularly at the inference layer Have a strong background in kernel-level systems, data movement, and low-level performance tuning Are excited about scaling high-performing AI systems that serve real-world, multimodal workloads Can navigate ambiguity, set technical direction, and drive complex initiatives to completion This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. About OpenAI OpenAI i

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples' lives. About the Role You will work at the cutting edge of OpenAI's robotics hardware, partnering with hardware and software teams to develop, build, test, and iterate on robotic systems. Working closely with engineers, you will build prototypes, execute experiments, fabricate fixtures, troubleshoot hardware, and help drive rapid iteration on new robotic technologies. Your practical problem-solving and technical judgment will help move projects from concept to reality. We are looking for versatile, hands-on generalists who enjoy solving problems across mechanical, electrical, fabrication, and experimental domains. The ideal candidate will have strong experience in high-velocity and early-stage hardware development environments, provide thoughtful feedback to engineering teams, and help improve both hardware and development processes. This role will help accelerate robotics development by enabling fast, high-quality iteration on new hardware concepts and systems. This role is based in San Francisco, CA, and is in-person 5 days a week. In this role, you will: Partner closely with engineers, researchers, and other members of the robotics team to support prototype development, experimentation, and hardware iteration. Build, modify, troubleshoot, and repair robotic systems and electromechanical assemblies spanning structural, electrical, sensing, and actuation subsystems. Design and fabricate fixtures, adapters, test equipment, and other prototype hardware that accelerate development efforts. Execute low-volume builds, engineering changes, and rework activities acro