Lead Development Engineer 4 Rdkv Cpp Manager Consultant Specialist in San Francisco

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Lead Robotics Safety Engineer to define and lead the product safety strategy for our robotics program. You will work closely with leadership, engineering, research, legal, and policy teams to ensure safety is integrated into our products from the earliest stages of development through deployment. This role combines product safety, regulatory strategy, systems engineering, and risk management. You will help shape how we think about safety across robotic platforms, influence product architecture and development decisions, and ensure our systems are designed to meet both current and emerging regulatory expectations. You will serve as a subject matter expert on robotics safety standards, regulatory frameworks, and safety engineering practices while helping establish the long-term safety strategy for our products and organization. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will Define and lead the product safety strategy for robotic systems across the development lifecycle. Monitor and influence emerging regulatory frameworks, industry standards, and policy developments relevant to robotics and autonomous systems. Partner with engineering teams to translate safety requirements into product architecture, design decisions, and engineering requirements. Develop and maintain system-level hazard analyses, risk assessments, and safety cases for robotic products. Establish safety requirements, verification strat

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

Overview: The Data Acquisition team within the Foundations organization at OpenAI is responsible for all aspects of data collection to support our model training operations. Our team manages web crawling and GPTBot services and works closely with Data Processing, Architecture, and Scaling teams. We are looking for a skilled Software Engineer to join our Data Acquisition team. Responsibilities: Own and lead engineering projects in the area of data acquisition including web crawling, data ingestion, and search. Collaborate with other sub-teams, such as Data Processing, Architecture, and Scaling, to ensure smooth data flow and system operability. Work closely with the legal team to handle any compliance or data privacy-related matters. Develop and deploy highly scalable distributed systems capable of handling petabytes of data. Architect and implement algorithms for data indexing and search capabilities. Build and maintain backend services for data storage, including work with key-value databases and synchronization. Deploy solutions in a Kubernetes Infrastructure-as-Code environment and perform routine system checks. Conduct and analyze experiments on data to provide insights into system performance. Qualifications: BS/MS/PhD in Computer Science or a related field. 4+ years of industry experience in software development. Experience with large web crawlers a plus Strong expertise in large stateful distributed systems and data processing. Proficiency in Kubernetes, and Infrastructure-as-Code concepts. Willingness and enthusiasm for trying new approaches and technologies. Ability to handle multiple tasks and adapt to changing priorities. Strong communication skills, both written and verbal. About OpenAI OpenAI is an AI research and deployment company dedicated to ensuring that general-purpose artificial intelligence benefits all of humanity. We push the boundaries of the capabilities of AI systems and seek to safely deploy them to the world through our products. AI is an

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

About Sentry Software runs the world and the pace is faster than ever. Sentry helps developers fix errors and performance issues before users notice, so teams can spend less time firefighting and more time building. Trusted by 200,000+ organizations, Sentry is today’s application monitoring standard and our team is building its AI-native future. About the role Sentry provides developer-first observability to over 4 million developers worldwide. The Events Analytics Platform (EAP) team is at the heart of that mission: it powers how all of Sentry's event data, such as errors, transactions, spans, profiles, replays, and metrics, is stored, queried, and analyzed. It also powers Sentry's latest AI push, Seer. The EAP team makes it possible for developers to efficiently search and debug across massive volumes of data, providing the context needed to understand and fix issues quickly. This team is also a cornerstone of Sentry's long-term strategy to become a context assembly and telemetry platform that unifies different signals so developers can see the complete picture. As an engineering manager on the EAP team, you will lead a group of engineers building and scaling one of Sentry's most critical data platforms. You will be responsible for driving architectural evolution, ensuring system stability, and mentoring a talented team. This is a highly visible leadership role with direct ties to Sentry's long-term product and platform strategy. What you'll do Grow and develop a team of engineers with high expectations for ownership and impact Set the technical and strategic direction for the team, balancing short-term stability with long-term architectural evolution Drive development of core EAP features, including support for complex analytical queries, dynamic routing logic across fidelity levels, storage and compute separation, and modern patterns for analytical storage Ensure EAP can support the workload demands of AI agents and MCP servers that unlock new AI capabilities fo

ABOUT BASETEN Baseten powers mission-critical inference for the world's most dynamic AI companies, like Cursor, Notion, OpenEvidence, Abridge, Clay, Gamma and Writer. By uniting applied AI research, flexible infrastructure, and seamless developer tooling, we enable companies operating at the frontier of AI to bring cutting-edge models into production. We're growing quickly and recently raised our $1.5B Series F , led by Altimeter Capital, Conviction Partners, and Spark Capital. Join us and help build the platform engineers turn to to ship AI products. THE ROLE As a Software Engineer at on the Training Infrastructure team, you'll architect and lead development of our training platform, supporting top tier research engineers and model developers. You'll make key technical decisions for the infrastructure enabling developers to deploy, scale, and monitor their workloads with high performance and reliability. You’ll own scheduling, storage, networking, reliability, and observability of technical systems in the training stack EXAMPLE INITIATIVES Take a look at what we’ve built so far: Overview of the product so far Training docs overview Story of the Training product Research we've done RESPONSIBILITIES Design and architect scalable infrastructure systems for our ML training platform (e.g. scheduling, storage, and networking) Partner closely with developers and research engineers to translate complex training requirements into technical solutions Design and architect a global training scheduler Design and architect reinforcement learning systems and continuous learning pipelines Drive long-term improvements to improve reliability of systems and velocity of development Partner closely with SRE and Capacity teams to unlock state of the art training infrastructure Make critical architectural decisions balancing performance with system reliability Lead technical discussions and mentor junior engineers on infrastructure best practices Contribute to long-term technical strateg

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

About ElevenLabs ElevenLabs is an AI research and product company transforming how we interact with technology. We launched in January 2023 with the first human-like AI voice model. Today, we serve millions of users and thousands of businesses - from fast-growing startups to large enterprises like Deutsche Telekom and Meta. Our investors are some of the world's most prominent, including Andreessen Horowitz, ICONIQ Growth and Sequoia. We've raised $781M in funding and our last valuation was $11B - multiples of 11, always. We have expanded from voice into three main platforms: ElevenAgents enables businesses to deliver seamless and intelligent customer experiences, with the integrations, testing, monitoring, and reliability necessary to deploy voice and chat agents at scale. ElevenCreative empowers creators and marketers to generate and edit speech, music, image, and video across 70+ languages. ElevenAPI gives developers access to our leading AI audio foundational models. Everything we do is the result of the creativity and commitment of our team - builders doing the best work of their lives. We are researchers, engineers, and operators. IOI medalists and ex-founders. If you want to work hard and create lasting positive impact, we want to hear from you. How we work High-velocity: Rapid experimentation, lean autonomous teams, and minimal bureaucracy. Impact not job titles: We don’t have job titles. Instead, it’s about the impact you have. No task is above or beneath you. AI first: We use AI to move faster with higher-quality results. We do this across the whole company—from engineering to growth to operations. Excellence everywhere: Everything we do should match the quality of our AI models. Global team: We prioritize your talent, not your location. What we offer Innovative culture: You’ll be part of a generational opportunity to define the trajectory of AI, surrounded by a team pushing the boundaries of what’s possible. Growth paths: Joining ElevenLabs means joining a

About the Team OpenAI is building the infrastructure foundation for the next generation of AI. The Data Center Engineering team defines the strategy, reference architectures, technical requirements, and delivery standards for the large-scale data centers that support OpenAI research, products, and infrastructure partners. As a Data Center Infrastructure Electrical Engineer, you will help define, validate, and scale the electrical power systems that support high-density AI compute. You will translate evolving compute requirements into practical facility and rack-power architectures, evaluate new technologies and vendor solutions, and drive technical decisions across design, manufacturing validation, construction, commissioning, deployment, and operations. This role is best suited for a senior hands-on engineer with deep experience in mission-critical power systems, strong judgment under ambiguity, and the ability to connect facility infrastructure, hardware requirements, controls, telemetry, reliability, and operations. About the Role We are seeking a senior electrical infrastructure engineer to lead the development of reliable, scalable, and efficient power architectures for high-density, liquid-cooled AI data centers. The ideal candidate has strong practical experience with critical electrical systems at data centers or comparable industrial scale, including medium-voltage and low-voltage distribution, utility interfaces, backup power, UPS and battery systems, rack power delivery, grounding, protection, controls, and monitoring systems. You should be comfortable moving between long-range architecture, detailed engineering review, lab validation, vendor qualification, field deployment, and operational troubleshooting. Key Responsibilities Design and optimize electrical topologies and equipment strategies that reduce cost, accelerate schedules, improve efficiency, increase scalability, and maintain high reliability and maintainability. Review and develop basis-of-des

About Sentry Software runs the world and the pace is faster than ever. Sentry helps developers fix errors and performance issues before users notice, so teams can spend less time firefighting and more time building. Trusted by 200,000+ organizations, Sentry is today’s application monitoring standard and our team is building its AI-native future. About the team The Billing team sits at the intersection of product, finance, and infrastructure. They're responsible for ensuring every observable event—errors, logs, traces, tokens—gets accurately measured, priced, and billed. Their work directly impacts company revenue and customer trust, requiring distributed systems expertise, attention to financial accuracy, and deep understanding of product usage patterns. The team works cross-functionally with product, engineering, BizOps, marketing, and sales to build systems that enable new products and pricing models. As an Engineering Manager, you’ll lead a team of engineers owning critical workflows such as checkout and invoicing, while also developing new features to help customers manage their spend growth. In this role, you’ll partner across the organization to ensure our customers redeem everything Sentry has to offer and budget for future expansion. In this role you will Strategic Planning & Roadmap: Define and drive the team's roadmap. Align team goals with organizational objectives and contribute to the overall platform strategy. Technical Guidance & Operational Excellence: Provide technical leadership and guidance on complex distributed systems and design. Ensure the team is proactively identifying areas for improvement. Cross-functional Collaboration: Partner closely with business and technical teams to translate business goals into actionable objectives and scalable solutions. Team Leadership & Development: Lead, mentor, and grow a team of talented engineers, including Staff-level engineers. Build a culture of technical excellence, collaboration, continuous