Lead Software Development Engineer in United States

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team OpenAI’s Hardware organization develops system and infrastructure solutions designed for the unique demands of advanced AI workloads. We work closely with architecture, infrastructure, and vendor teams to evaluate system performance and guide critical design decisions. Our team focuses on building and applying performance modeling frameworks to understand system behavior, quantify tradeoffs, and support next-generation infrastructure design. About the Role We are seeking an Performance Modeling Engineer to support the development and application of modeling tools used to evaluate AI system performance and inform architectural decisions. In this role, you will partner closely with Senior Performance Modeling Engineers and the Performance Modeling Lead to analyze system behavior, run simulations and analytical models, and help evaluate tradeoffs across compute, memory, networking, and storage. You will contribute to building modeling frameworks while developing a strong foundation in system architecture and AI infrastructure. This role is ideal for early-career engineers with 1–2 years of experience in software engineering, systems analysis, or performance modeling who are excited to grow in large-scale infrastructure and hardware/software systems. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance. Key Responsibilities Support the development and maintenance of performance modeling tools and frameworks Assist in building models to evaluate system behavior across compute, memory, networking, and interconnect subsystems Help analyze distributed system scaling behavior and identify performance bottlenecks Run simulations and analytical models to support architecture and infrastructure decisions Partner with senior engineers to evaluate design tradeoffs across hardware and system components Interpret modeling outputs and help translate findings into clear recommendations Vali

Become a part of our caring community The Senior Full Stack Engineer Performs software engineering activities in all layers of the stack, from setting up the database to programming in the back-end and the appearance at the front-end. The Senior Full Stack Engineer work assignments involve moderately complex to complex issues where the analysis of situations or data requires an in-depth evaluation of variable factors. As Centerwell builds its AI engineering function from the ground up, we need a platform foundation strong enough to support everything that comes next. As Lead Full-Stack Engineer focused on platform and API engineering, you will design and build the service layer that connects AI capabilities, data systems, and product frontends—setting the standards for how services are built, secured, and operated across the team. You will work with meaningful architectural scope, making decisions that span API design, security patterns, and deployment practices. The platform you build will serve care teams and patients across hundreds of Centerwell clinics. If you want to build platforms that others build on—and do it in service of better primary care—this is the role for you. Key Responsibilities Platform and API Architecture: ** Design and lead development of core backend services, REST and GraphQL APIs, and service-to-service integrations that connect all layers of Centerwell's AI product stack. Security and Compliance by Design: ** Establish patterns for authentication, authorization, rate limiting, PHI access control, and audit logging. Ensure HIPAA compliance is embedded in platform design from day one—not bolted on after the fact. AI and LLM Integration Patterns: ** Define and implement reusable patterns for integrating AI capabilities into product

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

Job Details: Job Description: Join an enthusiastic team of engineers in Intel's Networking Solutions Group (NSG) focused on enabling next generation of programmable Infrastructure Processing Units (IPUs) with our lead customers as part of the Customer Experience Support (CES) organization. Intel brings decades of leadership in networking, virtualization, packet processing, storage, and security to a new class of IPU products that accelerate host networking functions and support emerging use cases such as security, virtualization, storage, load balancing, and data path optimization. Working closely with major cloud service providers and Intel development teams, you will help deliver customized IPU based solutions that enhance isolation, security, performance, storage and system management for our customers. A big part of the day-to-day job is to help customers manage feature request processes, enable solutions, and debug issues. Projects and responsibilities include but are not limited to: • Gain our customers' trust, understand their needs, and build POCs to meet them. Work closely with internal and external partners to understand use cases and requirements. • Be the go-to technical resource for customers building complex Datacenters, AI infrastructure as well as helping them understand performance characteristics for solutions. • Prepare and deliver technical content to customers including presentations, workshops, etc. • Contribute across the full IPU lifecycle, including board and platform bring up, low-level device initialization, OS driver and kernel configuration, system management, feature enablement, use case testing, debugging, and verification. • Defines systems implementation and integration solutions and plans to ensure optimum performance and reliability across hardware, firmware and software w

Lead Analyst Company: The Boeing Company Boeing F-22 Mission Systems team is hiring for a Lead Analyst located in Berkeley, MO . As Lead Analyst, you will be responsible for analyzing engineering solutions for the F-22 Raptor, including both enhancing existing field units with the addition of new capabilities as well as architecting and testing completely new systems. In this role you will be joining a cross-functional team to progress our products through the development lifecycle. Position Responsibilities: Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Must be able to work in a fast-paced, collaborative environment, engaging with multiple teams and being responsive to agile requirements and critical path customer need dates. Collaborates with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system requirements for F-22 avionics sub-systems and weapon system architecture Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications in support of lab and operational environments Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a US Secret Security Clearance for which the US Government requires US Citizenship A final Secret Clearance

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

About the Team We are a small and fast-moving partnerships team that shapes and executes OpenAI’s most important collaborations. Your mission is to build and grow partnerships across the cybersecurity ecosystem. Reporting to the Cybersecurity Partnerships Lead, you will own a portfolio of cybersecurity technology partners and help them validate, launch, and scale solutions powered by OpenAI models and platforms. About the Role You are an experienced partnerships operator who combines business development, partner management, technical curiosity, and strong execution. You can manage external relationships while driving detailed cross-functional work across product, engineering, technical success, sales, marketing, legal, security, and operations. You move with urgency, follow through consistently, and are comfortable managing a portfolio in a fast-changing market. In this role, you will: Source, close and manage a portfolio of cybersecurity technology partners. Identify high-value use cases across security operations, identity, cloud security, application security, threat intelligence, governance, risk, and compliance. Develop partner plans covering integration, launch, enablement, co-marketing, co-sell, and growth. Support partnership structuring and coordinate product, technical, commercial, legal, and security workstreams. Help partners move from concept and technical validation to production launch and scaled customer adoption. Run regular partner reviews, track commitments, resolve blockers, and identify expansion opportunities. Coordinate closely with product, engineering, technical success, sales, marketing, legal, security, and operations. Measure partner pipeline, launches, model adoption, consumption, customer outcomes, and partner health. You might thrive in this role if you have: 8+ years of experience in partnerships, business development, alliances, partner success, or ecosystem roles. Experience in cybersecurity, enterprise software, cloud platforms, o

About the role We are building a higher education researcher motion that helps funded labs adopt OpenAI across core research workflows. This role will develop relationships with principal investigators, researchers, research software engineers, research computing teams, and university technology leaders, then translate high-value use cases into sustained Pro, Codex, API, and ChatGPT Edu usage. This is a hybrid business development and program management role. You will identify and qualify priority labs, design phased access and fellows programs, run pilots, remove technical and institutional blockers, and create repeatable paths from individual researchers to lab- and institution-level adoption. Additionally, this role will launch and manage a community of researchers with events, communications and support. In this role, you will: Build a pipeline of funded labs, research centers, and technical champions at priority R1 universities; qualify opportunities based on workflow value, funding path, influence, and expansion potential. Run discovery with researchers and university stakeholders to understand workflows, data and security needs, procurement constraints, and success criteria. Design and operate phased access and fellows programs, including eligibility, selection, offer mechanics, onboarding, office hours, community programming, and pilot goals. Translate research workflows into effective use of Pro, Codex, API, and ChatGPT Edu in partnership with Solutions, Product, and Education account teams. Manage pilots end to end, remove trust, funding, and technical blockers, and drive measurable activation, retention, and expansion. Turn early usage into product feedback, workflow documentation, peer proof, case studies, and repeatable enablement. Build clear handoffs and expansion paths from researcher to lab to institution; track fellow selection, activation, retained usage, workflow proof, conversion, and expansion. You might thrive in this role if you: Relevant exp

Lead Systems Integrator Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Lead Systems Integrator (Level 4) to support an Air Dominance Fixed Wing Proprietary Program in St. Louis, MO . Step into a fast-paced, cutting-edge program where your expertise will drive the design, integration, and testing of advanced, cloud-based systems that empower mission planning, debrief, and tactical Command & Control (C2) solutions for fixed-wing platforms. In this role, you will lead the development, analysis, and integration of innovative engineering solutions for critical Ground System capabilities and ensure seamless support for ground systems from initial design through to final delivery. You will partner closely with the team’s test lead as well as the overall chief integrator who oversees all activities related to design, integration, and test. You will work with a high-performing, cross-functional team in an agile environment, driving next-generation capabilities from design through delivery. This role offers the chance to innovate with open-architecture, model-based designs and collaborate across disciplines to support critical defense missions. You champion best practices, processes, and standards for the integration team, mentor systems and electrical engineers, and coach solution leads on execution. If you’re passionate about advancing mission-critical systems and thrive in a collaborative, fast-moving environment, this is your opportunity to make a significant impact. Position Responsibilities Lead team of systems and electrical engineers in behavior modeling and requirements decomposition for system, sub-system, and software design

About Graphcore At Graphcore, we’re building the future of AI compute.We’re a team of semiconductor, software and AI experts, with deep experience in creating the complete AI compute stack - from silicon and software to infrastructure at datacenter scale.As part of the SoftBank Group, backed by significant long-term investment, we are delivering key technology into the fast-growing SoftBank AI ecosystem.To meet the vast and exciting AI opportunity, Graphcore is expanding its teams around the world.We are bringing together the brightest minds to solve the toughest problems, in a place where everyone has the opportunity to make an impact on the company, our products and the future of artificial intelligence. Job Summary We are looking for an experienced System Level Test Engineer to join our Product Test and Diagnosis Department (PTD). In this role, you will lead the development and deployment of System Level Test (SLT) solutions for next-generation AI processors. Working closely with cross-functional teams, you will contribute to the design and implementation of SLT hardware, software, automation, and characterization solutions that support silicon bring-up, yield learning, manufacturing readiness, and production deployment. The ideal candidate will possess strong technical depth in semiconductor test and validation, a passion for solving complex engineering challenges, and a strong focus on product quality and manufacturability. The Team The Product Test and Diagnostics team’s role is to detect and manage hardware defects that arise from the manufacture and use of our products. This covers chips, boards and finished systems and takes place both in the manufacturing sites and in the field. Responsibilities and Duties Lead development and deployment of SLT hardware and software solutions supporting silicon bring-up, charac

About us Graphcore is one of the world’s leading innovators in Artificial Intelligence compute. It is developing hardware, software and systems infrastructure that will unlock the next generation of AI breakthroughs and power the widespread adoption of AI solutions across every industry. As part of the SoftBank Group, Graphcore is a member of an elite family of companies responsible for some of the world’s most transformative technologies. Together, they share a bold vision: to enable Artificial Super Intelligence and ensure its benefits are accessible to everyone. Graphcore’s teams are drawn from diverse backgrounds and bring a broad range of skills and perspectives, spanning AI research specialists, silicon designers, software engineers and systems architects. Job Summary We are looking for an experienced Principal Engineer to join our System Management team and help lead the development of critical interfaces used by internal and external customers to manage system state. You will provide technical leadership within assigned areas of System Management, guide architecture and implementation choices, mentor engineers and translate broader technical direction into effective execution. This is a hands-on engineering role for someone who can lead complex technical work, improve reliability and operational readiness, and collaborate effectively across multiple engineering disciplines. The Team The System Management team sits within the Software Platform group and helps build Graphcore products into large-scale AI solutions for our customers. The team is responsible for developing the interfaces between hardware, AI software and frameworks, as well as providing interfaces for public and private cloud environments. This includes system management capabilities that abstract complex hardware administration and enable reliable deployment and operation at scale. As one of the first teams to work with new hardware and software, we regularly solve complex system-level problems

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

Senior Systems Engineer - Product Owner Company: The Boeing Company The Boeing Company is looking for a Senior Systems Engineer - Product Owner to join our Government Vehicle Health Management Systems (GVHMS) team in Hazelwood, MO . This dynamic team contributes to cutting-edge vehicle health management solutions that enhance mission readiness and operational efficiency across multiple high-profile aerospace platforms. The role offers a unique opportunity to lead efforts in lab testing, requirements development, and advanced Model-Based Systems Engineering (MBSE) practices. By driving system integration, testing, and verification, the Senior Systems Engineer will ensure seamless performance and adherence to stringent customer standards while collaborating with a diverse group of talented software developers, test engineers, and external partners. This position is ideal for professionals passionate about innovative aerospace technologies and solving complex engineering challenges in a fast-paced, mission-critical environment Position Responsibilities: Develop and maintain product roadmaps and system lifecycle plans Develop, document, and verify requirements Develop project schedules and track performance Develop and organize work items for the software team Be responsible for the integration of the components of the GVHMS system to successfully meet customer requirements Coordinate with the customer on a regular basis Document team plans and status, develop meeting agendas and presentations Analyze process compliance and actively work on improvements This position is expected to be 100% onsite. The sel