Manufacturing Operation Manager in United States

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About Role We're a growing hardware company. As we scale, we also need a supply chain that evolves and stays nimble to the changing shape and direction our engineers designs. Today we need someone who understands the iterative process of R&D but is also ready to expand into new product introduction (NPI), and after that, high-volume manufacturing. We're hiring for where we're headed, not just where we are today. This role prioritizes judgment, adaptability, and analytical ability over years of experience alone. A strong candidate will be able to reason from first principles, quickly develop expertise in new commodities, and identify potential commercial or technical issues before they affect the program. While extensive tenure is not required, this is not an entry-level position; candidates should have a solid foundation in strategic sourcing, supplier management, and hardware manufacturing. Over time, you'll help us build out a full supply chain organization: buyers, global supply managers (GSMs), contract manufacturing leads, and specialists across categories like precision machining, gears and mechanical components, EMS/PCBA, electrical components, and contract/JDM manufacturing. Where this role goes - into a specific commodity, into people management, into ops - will depend on where you're strongest and where the business needs you most. This role is based in San Francisco, CA and requires in-person presence 4 days a week and up to 30% travel to vendor sites. In this role you will: Partner directly with engineering during R&

Where Performance Meets Purpose Join a team that values excellence and innovation, at a company known for its iconic golf brands. At Acushnet Company, your background and experience contribute to creating the best products for dedicated golfers worldwide. Here, your performance has purpose. What You Will Be Doing The Graphics Technician plays an important role in bringing custom golf ball and packaging designs to life while ensuring the highest standards of quality and accuracy. In this fast-paced position, you will create, maintain, and prepare production-ready graphic files for custom golf ball orders and packaging, supporting customers from proof creation through final production. Working closely with Customer Service, Quality, Production, and external packaging vendors, you will troubleshoot artwork issues, prepare logos and graphics for manufacturing, and help ensure flawless order execution. This role combines technical expertise, attention to detail, and collaboration to deliver exceptional custom products that enhance customer experience and uphold the brand's premium standards. This is a seasonal position with a flexible timeline based on business demands. There is no set start or end date, as employment duration and scheduling are determined by workload, production volumes, and overall business need s. What You Bring High school diploma or equivalent required 1-2 years of Graphic Arts education preferred Minimum of 2 years of graphic design experience Intermediate proficiency with Adobe Illustrator Basic experience with Adobe Photoshop and Adobe InDesign Experience with Adobe Dimension is a plus Strong attention to detail and ability to maintain accur

Where Performance Meets Purpose Join a team that values excellence and innovation, at a company known for its iconic golf brands. At Acushnet Company, your background and experience contribute to creating the best products for dedicated golfers worldwide. Here, your performance has purpose. What You Will Be Doing: Titleist is seeking a passionate and driven Associate Research Engineer to help shape the future of golf club performance through innovation, engineering, and data-driven design. In this role, you will apply engineering principles, scientific methods, and advanced computational tools to explore emerging technologies, analyze golf club designs and biomechanical swing dynamics, and validate concepts that contribute to next-generation Titleist products. Working alongside world-class researchers, engineers, and product designers, you will leverage modeling, simulation, and testing techniques to solve complex design challenges and uncover new opportunities for performance advancement. You'll collaborate across Research, Design, Product Development, Testing, Manufacturing, Sales, and Marketing to evaluate concepts, support product innovation, and translate technical findings into meaningful product improvements. This is a unique opportunity to deepen your expertise in golf club research and development, contribute to patentable technologies, and play a direct role in creating the high-performance products trusted by golfers around the world. What You Bring: Bachelor’s degree in Mechanical Engineering, Engineering, Computer Science, or a related field required. Strong foundation in engineering analysis, problem-solving, and product development. Experience with MATLAB and/or Python required. Exposure

Where Performance Meets Purpose Join a team that values excellence and innovation, at a company known for its iconic golf brands. At Acushnet Company, your background and experience contribute to creating the best products for dedicated golfers worldwide. Here, your performance has purpose. What You Will Be Doing Help shape the future of golf innovation as a CAD/CAM Programmer and Prototype Engineer . In this highly hands-on role, you will partner closely with R&D and engineering teams to transform new product concepts into functional prototypes that support next-generation golf equipment development. Using CAD/CAM software and advanced CNC machining technologies, you will design, program, machine, and refine prototype club heads, components, and precision fixtures. You will play a key role in bringing ideas from concept to physical reality by developing machining strategies, optimizing designs for manufacturability, and solving complex manufacturing challenges throughout the product development process. This role combines CAD/CAM programming, prototype machining, fabrication, and product development collaboration. Successful candidates enjoy working both at the computer and on the shop floor, building and improving prototypes while contributing to innovative product solutions. What You Bring Bachelor's degree in Mechanical Engineering or a related field, or equivalent professional experience in CAD/CAM programming, CNC machining, and prototype development. 3&#43; years of CAD/CAM programming experience, preferably with Siemens NX, Mastercam, Fusion 360, or similar CAD/CAM platforms. Experience with other advanced CAM systems will also be considered. <

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. As a Government and Public Affairs Intern , you will be responsible for providing support to Micron’s U.S. based Government & Public Affairs team, working on initiatives important to advancing Micron’s position as a world technology leader. You will conduct daily monitoring of political and policy developments, intelligence gathering, and analysis as issues emerge and evolve. This analysis will contribute to how the company understands, navigates, and shapes the policy & legislative systems in the United States at the federal level. You will ideally have knowledge or an interest in the areas of politics, technology, industrial policy and manufacturing, trade, foreign relations, and issues facing global companies. We seek a proactive problem-solver who excels in a fast-paced environment and is ready to dive in. This position will be based in Washington, D.C. Responsibilities include, but not limited to: Work closely with the Global Policy & Business Partnership team, as well as across the broader Government & Public Affairs team, on projects, events, and research to advance the team’s strategic objectives. Develop an understanding of Micron’s current and future potential issues and assess key policy, regulatory risks and opportunities. Conduct

At Gilead, we’re creating a healthier world for all people. For more than 35 years, we’ve tackled diseases such as HIV, viral hepatitis, COVID-19 and cancer – working relentlessly to develop therapies that help improve lives and to ensure access to these therapies across the globe. We continue to fight against the world’s biggest health challenges, and our mission requires collaboration, determination and a relentless drive to make a difference. Every member of Gilead’s team plays a critical role in the discovery and development of life-changing scientific innovations. Our employees are our greatest asset as we work to achieve our bold ambitions, and we’re looking for the next wave of passionate and ambitious people ready to make a direct impact. We believe every employee deserves a great leader. People Leaders are the cornerstone to the employee experience at Gilead and Kite. As a people leader now or in the future, you are the key driver in evolving our culture and creating an environment where every employee feels included, developed and empowered to fulfil their aspirations. Join Gilead and help create possible, together. Job Description Job Responsibilities: Performs a wide variety of activities to ensure compliance with applicable quality objectives and regulatory requirements - supervises QA personnel, including organizing and prioritizing daily tasks, performing training, and writing performance reviews. Participates in writing or suggesting changes to controlled documents (e.g., SOPs, specifications, methods, etc.) as needed to ensure defined quality objectives are met. Maintains programs and processes to ensure high quality products and compliance with current Good Manufacturing Practices (GMPs) and Good Laboratory Practices (GLPs). Reviews manufacturing, environmental monitoring and q

Job Details: Job Description: The Intel Logic Technology development (LTD) organizations delivers process technology innovation to drive Intel's product roadmap. We give you opportunities to transform technology and create a better future by delivering products that touch the lives of every person on earth. As a global leader in innovation and new technology, we foster a collaborative, supportive, and exciting environment where the brightest minds in the world come together to achieve exceptional results. We provide benefits that promote a healthy, enjoyable life: excellent medical plans, wellness programs, and amenities, time off, recreational activities, discounts on various products and services, and many more creative perks that make Intel a Great Place to Work. As a Process Integration Development Engineer, you will play a pivotal role in advancing Intel's semiconductor process technologies within the Logic Technology Development (LTD) group. Your day-to-day involves designing, optimizing, and implementing integrated process solutions that drive Intel's next-generation technology. By leveraging your expertise in process integration, yield analysis, and data-driven problem solving, you will contribute directly to the seamless transition of emerging technologies from development to high-volume manufacturing, ensuring Intel remains at the forefront of semiconductor innovation. Job Responsibilities include but are not limited to: ​ LTD Semiconductor Senior Process Integration Development Engineers are responsible for leading scientific research enabling the manufacture of innovative device architectures but not limited to: Lead scientific research enabling the manufacture of innovative device architectures coupled with the realization of these architectures. <li

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Department Intro: The Advanced Packaging Technology Development (APTD) department at Micron Technology is advancing next-generation packaging technologies that enable the performance and scalability requirements of tomorrow’s AI and high-performance computing applications. Our team brings together experts in process integration, materials engineering, and semiconductor development to solve complex technical challenges and turn new ideas into production-ready solutions. Join us and help shape the future of advanced memory and packaging technology! Position Overview: As a Process Integration Engineer for Advanced Packaging, you will play a key role in developing and integrating advanced package architectures, including 2.5D, 3D stacking, HBM, and hybrid bonding technologies. You will work across engineering disciplines to develop new processes, improve performance and yield, and support the transfer of emerging technologies into manufacturing. This is an opportunity to contribute to innovative products while working on some of the industry's most advanced packaging solutions. Responsibilities: Develop and optimize advanced packaging technologies, including 2.5D/3D integration, HBM, hybrid bonding, and advanced interconnects Design and execute experiments to qualify materials, process flows, and design rules for new package architectures Analyze yield, performance, and defect data to identify process improvements using SPC and advanced analytics Drive

Hydraulic Systems Engineer (Associate, Experienced, or Lead) Company: The Boeing Company Boeing Defense, Space & Security (BDS) Mobility, Surveillance and Bombers (MS&B) B-52 Commercial Engine Replacement Program (CERP ) is seeking a Hydraulic Systems Engineer (Associate, Experienced or Senior) to join the Systems Engineering, Integration, and Test (SEIT) team . The selected candidate will drive engineering excellence on this complex development program in Oklahoma City, OK . Position Responsibilities: Operate as the team’s Subject Matter Expert on the B-52 Hydraulics Subsystem. Lead systems and multifunctional engineering efforts for the SEIT IPT, ensuring adherence to technical quality standards throughout the product lifecycle Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to define and implement systems engineering processes and best practices Conduct trade studies and risk assessments to inform design decisions and optimize system performance, cost, and schedule Develop and maintain system requirements, interface control documents, and verification and validation plans to ensure compliance with customer specifications and regulatory standards Oversee the integration of hardware and software components in System Integration Labs in Oklahoma City Oversee the verification and test of hardware and software components supporting the modification in San Antonio

Aerodynamics Engineer (Aero-Stability & Control Analyst) Company: The Boeing Company Boeing Defense, Space & Security (BDS) is hiring an Experienced or Senior Aerodynamics Engineer to perform propulsion system qualification support and analysis in the St. Louis, MO region ! Position Responsibilities: Performs aerodynamic/aerothermodynamics design and analysis of flight vehicles to ensure that the vehicle meets requirements Key contributor to developing new and improving existing technologies, tools and processes to enhance technology readiness, improve vehicle performance and reduce cycle time and cost Conducts, coordinates and/or develops test requirements to meet test objectives using established processes Assesses the impact of proposed regulations to determine the effect on cost, performance, producibility, maintainability and safety Supports certification and qualification processes of the aerodynamic/ aero thermal characteristics of flight vehicles Assists in training others Works under general supervision Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5&#43; years work-related experience with a Bachelors degree OR an equivalent combination of work-related experience and technical education. Preferred Qualifications (Desired Skills and Experience): (Level 4) 9&#43; years work-related experience w

We anticipate the application window for this opening will close on - 28 Sep 2026 Careers that change lives start here. Medtronic is a global leader in healthcare technology with a Mission to alleviate pain, restore health, and extend life. Our 95,000 employees work across more than 150 countries to put patients first — developing innovative medical technologies that improve the lives of 72&#43; million patients each year. Your unique talents will help shape the future of healthcare while building a career grounded in purpose, growth, and impact. A Day in the Life At Medtronic, we not only get the opportunity to manage categories for the largest medical device company in the world, but we also get to experience the immense sense of purpose that comes from knowing that the money we save is reinvested into technology that helps alleviate pain, restore health and extend lives of millions of patients across the world. The work we do supports the Medtronic Mission and it matters. This is a global role that allows you to partner with stakeholders across many functions, regions, and businesses to drive value. Strong business acumen and prior sourcing experience are a must as you will be called upon to support complex engagements with strategic partners. The Associate Category Management Specialist is a key contributor within Medtronic’s Global Materials & Contract Manufacturing organization. In this role, you will help shape and execute category strategies, manage inflationary pressures, drive cost‑savings initiatives, support contract negotiations, and enable pan‑Medtronic category management processes. Your work will directly influence cost, continuity of supply, and supplier performance across the enterprise. At Medtronic, we bring bold ideas forward with speed and decisiveness t

We’re here for one reason and one reason only – to cure cancer. Every moment is dedicated to developing treatments and every action moves us one step closer to our goal. We’ve made incredible scientific breakthroughs and our pioneering personalized CAR T-cell therapies have changed the paradigm. But we're not finished yet. Join Kite, as we make even bigger advances in cancer therapies, and help shape where our business and medical science goes next. We believe every employee deserves a great leader. People Leaders are the cornerstone to the employee experience at Gilead and Kite. As a people leader now or in the future, you are the key driver in evolving our culture and creating an environment where every employee feels included, developed and empowered to fulfil their aspirations. Join Kite and help create more tomorrows. Job Description This is an office based/hybrid position. The Manager, Regulatory Affairs CMC is located in El Segundo, CA, Thousand Oaks, CA, Foster City, CA or Parsippany, NJ. Kite is transitioning from its current Santa Monica headquarters, with employees expected to relocate to our Thousand Oaks, CA, El Segundo, CA, Foster City CA or Parsippany, NJ office beginning in January 2027. While this role has the option to be based in Santa Monica through 2026, applicants should take this planned relocation into consideration. Kite supports a flexible working policy, offering a balanced approach with two days of remote working and three days working onsite. Support preparation and submission of CMC regulatory filings (INDs, CTAs, BLAs, MAAs, supplements, and variations), including submissions supporting lentiviral vector (LVV) manufacturing, testing, control strategy, and lifecycl

We are seeking a detail-oriented PCB Layout Engineer to maintain electronic component libraries and develop printed circuit board layouts. This role works closely with electrical engineering, mechanical engineering, procurement, and NPI to ensure component data and PCB designs are accurate, consistent, and ready for production. This position is in Austin, Texas. Key Responsibilities Create, verify, and maintain schematic symbols, PCB footprints, and associated 3D models. Validate component pin assignments, dimensions, land patterns, and library attributes against manufacturer documentation. Maintain library naming conventions, revision control, and component approval processes. Develop PCB layouts from approved schematics, including component placement, routing, stackup coordination, and design rule setup. Collaborate with engineers to address electrical, mechanical, thermal, and manufacturing requirements. Run design rule checks, resolve layout issues, and participate in design reviews. Prepare fabrication and assembly deliverables, including Gerber or ODB++ files, drill files, drawings, and pick-and-place data. Coordinate with PCB fabricators and assembly suppliers to resolve manufacturing questions. Support engineering changes and maintain accurate release documentation. Work with procurement and engineering to identify obsolete components and evaluate suitable alternatives. Required Qualifications Experience with setting up PCB design and electronic component library management. Proficiency in Cadence Allegro/OrCAD. Ability to interpret schematics, component datasheets, and mechanical drawings. Working knowledge of PCB fabrication, assembly processes, and design for manufacturability. Familiarity with relevant IPC standards for PCB design and component land patterns. Strong attention to detail, documentation skills, and ability to manage competing priorities. Experience with multilayer, high-density, mixed-signal, and high-speed PCB designs. Familiarity w

About Graphcore Graphcore is a global leader in artificial intelligence computing systems. We design advanced semiconductors and data center hardware that provide the specialized processing power needed to advance AI while improving the efficiency required for broad adoption. As part of SoftBank Group, Graphcore belongs to a family of companies developing transformative technologies. Our AI Engineering Campus in Austin plays an important role in building the hardware platforms that support the next generation of AI systems. The Opportunity We are looking for a recent graduate or early-career engineer to join the Mech/Thermal Platform team as a Graduate Mechanical Engineer. You will contribute to the mechanical design, thermal validation, and verification of advanced AI hardware and data center systems. You will work with experienced mechanical, thermal, hardware, and systems engineers throughout the development lifecycle. The role combines 3D computer-aided design, prototype evaluation, lab testing, data analysis, troubleshooting, and clear engineering documentation. What You Will Do Create and update mechanical parts, assemblies, and drawings using Creo or comparable 3D CAD software. Take ownership of defined mechanical design tasks from requirements and concepts through detailed design, review, release, and verification. Apply mechanical design, materials, manufacturing, heat transfer, and thermodynamics principles to engineering decisions. Develop mechanical and thermal test plans and procedures for prototypes and development systems. Set up and operate laboratory equipment, collect accurate data, analyze results, and document conclusions. Evaluate prototypes and identify mechanical, thermal, assembly, or manufacturability issues. Support design verification, troubleshooting, root-cause analysis, and implementation of verified design improvements. Maintain accurate engineering documentation, including design notes, drawings, test procedures, results, and change r