Physical Security Agent in San Francisco

About the Team The Consumer Products team at OpenAI builds end-to-end hardware and software systems that bring AI into the physical world. We work at the intersection of custom silicon, embedded systems, operating systems, and cloud services to deliver reliable, production-ready devices at scale. Within Consumer Products, the camera stack is a critical sensing component. The team partners closely with electrical engineering, silicon vendors, systems, and higher-level perception and product teams to bring up new hardware, stabilize capture pipelines, and ensure camera systems are robust, debuggable, and ready for real-world deployment. This work spans early prototypes through production, with a strong emphasis on correctness, repeatability, and long-term reliability. About the Role As a Camera Firmware Engineer, you will own low-level camera enablement on custom hardware—from early board bring-up through stable production capture. You will develop and maintain the firmware and software that makes camera sensors reliable, controllable, and debuggable, forming the foundation for higher-level camera pipelines and product features. This role is highly hands-on and systems-oriented. You will work close to the hardware, diagnose real-world timing and integration issues, and build tooling that accelerates iteration across the entire camera stack. This role is based in San Francisco, CA. We follow a hybrid work model with four days per week in the office and offer relocation assistance to new employees. In This Role, You Will Bring up new camera sensors and modules on prototype and production boards, including link stability, sensor control, and correct power, reset, and clock sequencing. Develop and maintain low-level camera software, including sensor drivers, board configuration, and camera subsystem integration across hardware revisions. Enable and validate core capture paths for development and production, including RAW capture for debugging, still capture, and hardware-

About the Team OpenAI’s Industrial Compute team is building and productizing infrastructure capabilities that help organizations deploy and operate advanced AI systems at scale. The team works across AI hardware, systems engineering, physical infrastructure, and customer delivery to turn emerging technologies into reliable, repeatable infrastructure solutions. Our work sits at the intersection of technical strategy, product development, engineering, and deployment. We partner closely with customers and internal engineering teams to solve complex infrastructure challenges spanning compute, power, cooling, controls, and facility efficiency. About the Role We are seeking a senior, hands-on Data Center Infrastructure Architect to develop and optimize the physical infrastructure required for large-scale AI deployments. This is a broad technical role spanning data center architecture, electrical and mechanical systems, high-density compute, controls, telemetry, and digital modeling. You will use simulation, operational data, and digital-twin approaches to evaluate infrastructure designs, identify system-level constraints, and improve efficiency, reliability, cost, and speed of deployment. The ideal candidate can move fluidly between first-principles analysis, facility and equipment design, computational modeling, engineering review, and real-world implementation. You should be comfortable working across disciplines rather than operating solely within electrical, mechanical, or software boundaries. Key Responsibilities Define system-level architectures for high-density AI data centers across power, cooling, IT equipment, controls, and facility infrastructure. Develop digital twins and other computational models that represent the behavior of data center systems under changing workloads, environmental conditions, equipment configurations, and failure scenarios. Use design and operational data to identify constraints, improve PUE and related efficiency metrics, and optimize

About the Team OpenAI’s Industrial Compute organization is building the infrastructure required to support the next generation of frontier AI systems. Through a combination of strategic partnerships and self-built data center campuses, we are scaling the physical infrastructure needed to deliver compute at unprecedented scale. The Commissioning organization is responsible for ensuring this infrastructure is safely tested, validated, integrated, and transitioned into reliable operations. As the portfolio grows, the team is building common standards, processes, tools, and reporting systems that allow commissioning programs to operate consistently across projects while giving teams and leadership clear visibility into readiness, risk, and execution. About the Role We are seeking a Commissioning Program Manager to build and scale the operating systems behind OpenAI’s infrastructure commissioning programs. You will own the development and continuous improvement of commissioning standards, processes, tools, dashboards, and KPIs across the infrastructure portfolio. You will work closely with commissioning and construction teams to translate field execution needs into practical playbooks, workflows, templates, metrics, and reporting mechanisms that teams can use from construction readiness through testing and turnover. This role sits at the intersection of infrastructure delivery, program management, process design, and data. The ideal candidate understands how complex construction projects operate and can turn fragmented workflows and project data into repeatable systems that improve execution without creating unnecessary administrative burden. Key Responsibilities Develop and maintain commissioning program standards, playbooks, process maps, templates, checklists, stage gates, and acceptance criteria across infrastructure projects. Establish consistent workflows for commissioning planning, construction readiness, QA/QC, issue management, document control, testing evidence

About the Team: OpenAI, in close collaboration with our capital partners, is embarking on a journey to build the world’s most advanced AI infrastructure ecosystem. Our Stargate program develops and deploys massive, state-of-the-art data center campuses in partnership with industry leaders today—and through future OpenAI infrastructure projects tomorrow. We design for scale, speed, and reliability, and we need experienced technicians who can translate network blueprints into physical reality. About the Role: We are seeking a Senior Data Center Networking Technician who thrives in fast-moving build environments and is eager to roll up their sleeves during active datacenter deployments. Your first assignment will focus on the physical bring-up of network infrastructure at a large partner-operated campus, collaborating with partner teams and their delivery vendors to achieve agreed performance and reliability targets. As that campus reaches steady state, you will transition to lead network deployment for future OpenAI data center projects, defining standards and guiding implementation across multiple locations. Candidates must be able to sit onsite in Abilene, Texas 5 days per week Key Responsibilities Serve as OpenAI’s technical lead technician during the current campus build, partnering with internal engineers and external contractors on design reviews, installation plans, and acceptance criteria. Spend significant time on the data-center floor performing inspections, assisting with cable routing/termination when needed, conducting fiber testing (OTDR, power levels, continuity), and resolving installation challenges in real time. Troubleshoot and optimize cabling routes, patching, and equipment turn-up to ensure clean, reliable handoff to network operations. Contribute to design discussions and peer reviews for structured cabling and physical network layouts, providing practical field feedback to engineering teams. Develop repeatable engineering standards, as-built do

About the Team OpenAI Consumer Devices is building the next generation of products that bring powerful AI into people’s everyday lives. Guided by OpenAI’s mission to ensure AGI benefits all of humanity, our team combines world-class researchers, engineers, designers, and operators who care deeply about creating useful, intuitive, and responsible technology. You’ll have the opportunity to work alongside exceptional people on ambitious, zero-to-one challenges at the intersection of hardware, software, and AI. This is a chance to help define an entirely new category of products—and shape how people experience AI in the future. Our team works across silicon, embedded systems, operating systems, and cloud services to build reliable consumer devices and the novel platforms required to support them. We partner closely with research to bring advanced AI capabilities into the physical world. About the Role As an Operating Systems Engineer focused on on-device inference, you will design, develop, and ship the OS stack that makes advanced AI capabilities reliable, responsive, and energy efficient on consumer devices. Your work will span OS services and frameworks, inference runtime integration, model fitting, scheduling, and performance and power management. You’ll partner with research to adapt models to device constraints, make design decisions across the stack, and carry solutions from early exploration through integration and production. In this role, you will: Build the inference platform: Design and implement maintainable OS services, frameworks, and clear interfaces for inference execution, model loading and lifecycle, and resource management. Fit models to device constraints: Partner with researchers on quantization, runtime integration, and memory optimization to meet memory, compute, and energy budgets while evaluating model quality and product behavior. Coordinate system resources: Develop scheduling and resource policies that balance inference with other device act

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design, build, and own the mechanical side of our robotic actuator dynamometer and test infrastructure. You will create the test stands, couplings, fixtures, load paths, guarding, and serviceable lab hardware that enable rigorous characterization of robotic actuators. This role combines precision mechanical design with hands-on lab work. You will take robotic actuator test infrastructure from requirements and analysis through CAD, fabrication, assembly, commissioning, and iteration, partnering closely with electrical and software engineers to deliver safe, flexible, high-uptime test cells. In this role, you will Own the mechanical architecture of dynamometer and actuator test cells, including frames, bases, load paths, alignment, guarding, and serviceability. Design dynamometer structures, robotic actuator fixtures, load-motor mounts, couplings, shafts, bearings, adapters, and torque-reaction hardware. Translate robotic actuator test requirements into robust mechanical systems for torque, speed, thermal, durability, backdrive, efficiency, and failure testing. Perform first-principles analysis and simulation for stiffness, strength, fatigue, vibration, thermal growth, critical speed, and safety factors. Create precise, repeatable alignment strategies that protect test articles, load machines, sensors, and couplings. Design modular fixturing that supports rapid changeover across actuator and motor variants without compromising measurement quality. Work closely with electrical engineers on cable routing

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We’re looking for a Robotics Control Systems Engineer to take on a foundational role within our robotics team. You’ll help architect, implement, tune, and verify the control infrastructure that enables intelligent, reliable, and responsive robot behavior. This is a deeply hands-on role focused on real-time systems, actuation, dynamics, low-level hardware interaction, and whole-robot performance. You’ll spend significant time working directly with robots onsite: debugging behavior, tuning subsystems, running experiments, and providing feedback across mechanical, electrical, and software teams. This role is based in San Francisco, CA, and requires in-person 5 days a week. In this role, you will: Design and implement real-time control algorithms for robotic systems, including motion control, feedback loops, state estimation, actuator control, and subsystem tuning. Define the control architecture from low-level actuators and hardware interfaces through whole-robot behavior and policy. Identify and characterize actuator, hardware, and software parameters through rigorous experimentation, testing, commissioning, and verification. Work with machine learning engineers to implement reinforcement learning models. Collaborate across mechanical, electrical, and software teams to integrate control logic with sensing and actuation hardware. Help inform the mechanical and electrical design to maximize capability and flexibility. Create the control system architecture; determine the correct level of abstraction from actuators all the way up to whole-robot

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a PCB Layout Engineer to design high-density electronics for next-generation robotic systems. You will own PCB layout from floor planning through fabrication release, working closely with electrical, SI/PI, mechanical, and manufacturing teams. This role is based in San Francisco and requires in-person presence four days per week. In this role, you will: Own PCB layout, component placement, routing, and fabrication release for complex robotic systems. Collaborate with SI/PI engineers to refine layouts based on simulation results. Implement high-speed routing, controlled impedance, power distribution, decoupling, grounding, EMI/EMC, thermal, and mechanical-integration requirements. Work directly with fabricators and assembly partners to define stack-ups, establish design rules, drive DFM/DFA/DFT reviews, and close findings before release. Prepare fabrication and assembly documentation, including drawings, ODB++, drill files, stack-up tables, and manufacturing notes. Inspect newly received PCBAs and participate in board-level manufacturing failure analysis. Contribute to reusable design constraints and layout workflows, and maintain component-library assets such as symbols, footprints, and 3D models. You might thrive in this role if you: Have 6+ years of experience designing complex, multilayer PCBs. Are fluent in Cadence Allegro PCB Designer and Constraint Manager. Have strong HDI design experience, including fine-pitch BGAs, microvias, blind and buried vias, via-in-pad, and sequential lamination.

About the Team OpenAI Consumer Devices is building the next generation of products that bring powerful AI into people’s everyday lives. Guided by OpenAI’s mission to ensure AGI benefits all of humanity, our team combines world-class researchers, engineers, designers, and operators who care deeply about creating useful, intuitive, and responsible technology. You’ll have the opportunity to work alongside exceptional people on ambitious, zero-to-one challenges at the intersection of hardware, software, and AI. This is a chance to help define an entirely new category of products—and shape how people experience AI in the future. The Systems Integration team is critical in this mission, turning complex hardware-software development into reliable product signals. Lab Operations is the physical backbone of that work: we build and maintain the device fleets, test environments, and hardware-in-the-loop labs that let teams test repeatably, understand failures, and ship with confidence. About the Role As a Lab Operations Manager, Systems Integration , you will own the day-to-day operation of a large-scale consumer device test lab. This is a hands-on operations leadership role: you’ll keep device fleets, test rigs, lab infrastructure, inventory, provisioning, maintenance, and logistics running smoothly so engineers and QA technicians have reliable environments for validation and release testing. We’re looking for someone who is highly organized, technically hands-on, comfortable with consumer electronics and lab equipment, and experienced operating complex physical test environments at scale. Because this is a new category of devices, you’ll have the opportunity to build the lab operating model early—shaping the systems, standards, and workflows that support products from prototype through launch. In this role, you will: Own device fleet and inventory: Manage configuration, deployment, tracking, lifecycle, and accurate asset records for a large fleet of consumer devices and test

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a TPM to drive development and integration of a range of sensor systems for robotics. This role will drive cross-functional alignment across requirements, engineering design, integration, validation, manufacturing, supply chain, and release processes, helping turn complex sensor-system needs into clear plans, decisions, and milestones. Location and in-person expectations: This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive requirements alignment across engineering design, integration, testing, and validation for camera modules, LiDAR, IMUs, RADAR, proximity sensors, audio components and the systems they interact with. Coordinate the integration of modules including electrical, mechanical, harnessing, and software interfaces with the full robotic system with deep understanding of timelines to drive the respective PCBAs, enclosures, build and test fixtures, connectors and cables. Establish effective cadences for technical reviews, BOM readiness, change management, production releases, approvals, and decision tracking. Align harnesses, fasteners, assembly fixtures, test fixtures, and documentation so cross-functional teams can execute against a clear plan. Lead validation planning around functional, reliability, NVH failure modes, including testing needs, schedules, and exit criteria. Partner with manufacturing and supply chain to manage handoffs, lead times, dependencies, and production readiness. Drive tradeoff decisions across cost, qua

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.

About the Team The Future of Computing Research team is an applied research team within OpenAI’s Consumer Devices group. We study how AI systems perceive people and their surroundings, and we turn that research into capabilities for future products. Our work spans machine learning, sensing, and hardware, with a focus on building systems that work beyond controlled environments. About the Role We’re looking for a machine learning engineer to help shape how future AI systems understand the physical world and the people in it. The role focuses on multimodal perception and authentication, bringing together signals from cameras, microphones, and other sensors. You’ll work with specialized perception models and larger multimodal models, and partner with hardware, firmware, software, and product teams to bring new research into real-world systems. This role is based in San Francisco. We work in the office three days per week and offer relocation assistance. In this role, you will: Research and develop multimodal perception and authentication methods across visual, audio, and other sensing signals. Explore how specialized perception models and larger multimodal models can work together. Design data, training, and evaluation approaches that improve performance in real-world conditions. Study model behavior, robustness, and failure modes across sensing, data, and deployment environments. Integrate and validate new capabilities in real-time or resource-constrained systems. Work with hardware, firmware, software, and product teams to turn research into working systems. You might thrive in this role if you: Have a strong background in computer vision, audio or speech machine learning, multimodal learning, or sensing. Have experience developing specialized machine learning models, larger multimodal models, or both. Have brought research ideas into practical systems, prototypes, or products. Know how to design experiments, build evaluations, and investigate model behavior. Have wo