Recruiter in Berkeley

Tactical RF Sensors Subsystem Lead Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Tactical RF Sensors Subsystem Lead Engineer to be the lead for sensor subsystem in Berkeley, MO , supporting a proprietary Air Dominance Fixed Wing program . You will be joining a fast-paced program where you will be responsible for developing and integrating complex, highly integrated, radio frequency (RF) sensor systems. In this role, you will be joining a cross-functional team integrating next generation capabilities as part of a very exciting and critically important development effort. Your role will be to oversee and coordinate the work of a team of engineers throughout the various stages of the program development life cycle. You will have the opportunity to operate in an agile development environment to mature our products, work on next generation open-architecture model-based designs, and to collaborate across multiple disciplines. The day-to-day activities of this position will be a combination of traditional design engineering, coordinating the daily activity of the engineering team, overseeing and approving technical work, collaborating with cross-functional peers, and presenting technical challenges and solutions to leadership. Frequent interaction with program leadership, customers, and industry partners during critical design phases will be key elements of this position. This position will provide the candidate an opportunity to develop their engineering skills with potential growth into a leadership role. Position Responsibilities: Coordinate the daily activity of an engineering team using agile toolsets (JIRA, Confluence, etc.) Provide technical l

Lead RF Engineer - Aperture Architect Company: The Boeing Company Boeing Defense, Space & Security is seeking a Lead RF Engineer – Aperture Architect to serve as the engineering lead for the antennas and apertures on a major air proprietary program. As the Lead RF Engineer – Aperture Architect, you will provide technical leadership and drive technical execution in the development of advanced RF antennas that balance performance across sensing, structural, and low observable requirements. You will be the technical lead for a team of engineers designing and integrating modern RF apertures and antennas. You will work with the IPT leader and IPT Chief Engineer to ensure the team produces a compliant system design. Position Responsibilities: Drives technical excellence throughout all aperture design activities Provides technical leadership and ensures use of best practices across programs Provides oversight and approval of technical approaches, products, and processes. Works closely with program managers, program chief engineers, and other Boeing teams to ensure mission success and prompt resolution of anomalies Provides mentoring and coaching to other aperture design engineers Captures lessons learned and best practices for implementation on future programs Resolves complex problems impacting completion of program milestones Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement <

Experienced Product Security Engineer (Software) ***Signing Bonus Potential*** Company: The Boeing Company Boeing is hiring for an Experienced Product Security Engineer (Software) to join our team located in Berkeley, MO. At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us to build something better for yourself and for our customers and for the world. Be part of a team that designs and protects our nation’s most advanced capabilities. The Boeing Company is seeking experienced engineers to contribute to the design and development efforts for key computing assets embedded in the most advanced Boeing defense platforms. This job is an opportunity to be part of the Boeing Anti-Tamper Engineering Capability Center, which is tasked with the protection of all critical computers across all defense products developed within Boeing. Unlike most aerospace jobs where a team is focused on building a singular product for a specific customer, a career in Boeing’s Anti-Tamper Engineering Capability Center offers the opportunity to contribute to products across Boeing’s entire elite defense portfolio. These positions are based in St. Louis, MO and are focused on software development. Experienced Software Engineers support requirements definition, create software architectures, implement software designs, and test our security solutions and the computing devices into which they are included. We a

Nondestructive Test (NDT) Technician - UT & RT Company: Boeing Defense, Space & Security (BDS) has exciting opportunities for Nondestructive Test (NDT) Technicians (Associate or Experienced) in St. Louis, MO! Join our dynamic and supportive Quality team! In this role, you will conduct Non-Destructive Testing (NDT) on aerospace products using cutting edge methods including ultrasonic (UT), eddy current (ET), and radiographic (RT). You will work with digital and automated inspection systems in an aerospace environment aligned with industry standards and regulations. Opportunities for rapid skill growth and progress depending on performance. Employees will be required to obtain Boeing NDT certification and pass a vision exam. Failure to achieve or maintain certification requirements may lead to termination of employment. Candidates must have documented evidence of NDT education and/or OJT hours in UT or RT available for Boeing Level 3 review. Work Environment: May be exposed to noise, dust, fumes, airborne particles, smoke (not over OSHA permissible exposure levels). This position requires the applicant to work in a radiation environment and involves exposure to radiation. Candidates must demonstrate a strong understanding of relevant safety and health regulations, protocols, policies, and procedures to ensure a safe working atmosphere for self and others. Safety training and equipment are provided by Boeing in accordance with applicable laws, industry standards, and company policies. Will be required to wear Personal Protective Equipment (PPE) applicable to the testing method being used. Able and willing

Experienced Engineering Technical Specialist Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking Experienced Engineering Technical Specialists (Level 3) to join the team in Berkeley, MO. This position supports Risk Managed Framework compliance across multiple avionics test labs as well as the administration of embedded PCs and host PCs on avionics test benches. The Lab Infrastructure team is responsible for the design, modification, and troubleshooting of all test benches used in the avionics' lab to support systems integration testing on the F-15. Position Responsibilities Build and configure embedded PCs and host PCs on test benches Support RHEL 9 Installation, configuration, patching and maintenance of Linux server environments Support containerization Provide active directory management and file server management Troubleshoot user problems related to hardware, software, or processes Conduct monthly OS patching and anti-virus updates Create user accounts and reset passwords Run backups on workstations and servers Maintain compliance with Risk Managed Framework and NISPOM rules Keep facility signage up to date Maintain lab access list Travel may be required up to 10% of the time; domestically and/or internationally depending on business needs. This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications (Required Skills/Experience) <ul

Ship Suitability Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Ship Suitability Engineer (Level 5) to support the Systems Engineering Integration & Test ( SEIT) Team in Berkeley, MO . Located within the BDS Air Dominance Systems Engineering core group in St Louis, Missouri supporting the Ship Suitability functions in the core and across individual programs. The candidate will support core efforts in development and maintenance processes and tools and will act as the “user/customer advocate” on naval programs to instill operational quality in Boeing’s products. The candidate will collaborate with Boeing Integrated Product Teams and the maritime customer, working to inform integration into the shipboard environment including approaches to launch and recovery, deck handling, communication modes with the ship, and shipboard qualification testing. The candidate will support engineering and test efforts on programs at the systems level by analyzing designs, participating in trade studies, designing/developing concepts, and assisting with drafting and executing test plans for air ship integration of weapons systems. The candidate will also lead and support training efforts to educate Boeing and customer engineers in naval aviation operations, procedures, equipment and environments pertaining to ship suitability. Training efforts may include, but are not limited to, classroom training at Boeing facilities and leading groups of engineers aboard ships at sea and land-based facilities. Position Responsibilities Applies an interdisciplinary, collaborative approach to lead activities to plan, design, develop and verify complex lifecycle balanced system of

Lead Analyst Company: The Boeing Company Boeing F-22 Mission Systems team is hiring for a Lead Analyst located in Berkeley, MO . As Lead Analyst, you will be responsible for analyzing engineering solutions for the F-22 Raptor, including both enhancing existing field units with the addition of new capabilities as well as architecting and testing completely new systems. In this role you will be joining a cross-functional team to progress our products through the development lifecycle. Position Responsibilities: Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Must be able to work in a fast-paced, collaborative environment, engaging with multiple teams and being responsive to agile requirements and critical path customer need dates. Collaborates with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system requirements for F-22 avionics sub-systems and weapon system architecture Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications in support of lab and operational environments Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a US Secret Security Clearance for which the US Government requires US Citizenship A final Secret Clearance

Air Proprietary Tooling Engineer (Entry-Level or Associate) Company: The Boeing Company The Boeing Defense, Space & Security (BDS) team is seeking motivated Tooling Engineers located in Berkeley, MO . This role will support design, development, installation, and sustainment of production tooling and assembly aids used across manufacturing and maintenance programs. The role partners with manufacturing, quality, suppliers, and design engineering to deliver safe, compliant, and cost-effective tooling solutions that enable efficient production. At The Boeing Company, our mission is to connect, protect, and explore our world and beyond. Position Responsibilities Develop and qualify production tooling, jigs, fixtures, and assembly aids from concept through production release Translate manufacturing and design requirements into tooling specifications, drawings, 3D CAD models, and bill of materials Perform tolerance stack-up, fit checks, and tooling validation through analysis, prototyping, and hands-on trials Support tooling fabrication and inspection, including supplier management, fabrication oversight, and acceptance criteria verification Lead root-cause analyses for tooling-related manufacturing issues and implement corrective actions and continuous improvement Create and maintain tooling documentation: process plans, safety assessments, work instructions, inspection plans, and change records Collaborate with multidisciplinary teams—manufacturing, quality, stress, systems, and supply chain—to ensure tooling meets program schedule, safety, and quality goals Ensure compliance with company and regulatory standards, maintain configuration control and toolin

Manufacturing Engineer (Experienced or Senior) Company: The Boeing Company The Boeing Test and Evaluation (BT&E) Test Operations & Engineering (TO&E) Instrumentation Data System Installation Design team located in Berkeley, MO is seeking Manufacturing Engineers to provision Flight Test Instrumentation hardware on multiple aircraft platforms. On this team, a Manufacturing Engineer (Assembly & Installation) has the primary responsibility for the fabrication and installation of the mechanical and electrical hardware required to install a flight test data system. Design-Build Flight Test Manufacturing Engineers work the entire production cycle from review of engineering, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing) and detail planning, and continuing on through installation planning and shipside support. Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements. Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to ensure fabrication meets design, test, and program requirements. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Manufacturing Engineers. Position Responsibilities: Synthesis of test hardware & instrumentation requirements in support of flight test Review of design models and drawings, creating/reviewing redlines and coordinating with design to incorporate updates Authorship of manufacturing plans to facilitate build

Senior Systems Engineering Manager (Systems Engineering Management) Company: The Boeing Company Boeing Defense, Space & Security (BDS) is looking for a Senior Systems Engineering Manager (Level M) to join the System Engineering, Integration and Test (SEIT) Team in Berkeley, MO . The SEIT Senior Manager will lead a high-performing, cross-functional Systems Engineering, Integration, and Test (SEIT) team, driving the development and delivery of cutting-edge capabilities for the Air Proprietary Program. This position reports directly to the Air Proprietary SEIT Director. This position will plan, organize and direct activities for the Air Proprietary Systems Engineering team. A successful candidate will have familiarity with: Model Based System Engineering (MBSE) using MSOSA tools System Engineering best practices, processes, and procedures Design, Integration, and Test including architecture, interfaces, requirements, modeling, and verification Certification including Airworthiness, Certifications, and SCFTA Configuration Management & Data Management including Teamcenter/IPDM, SSOWs, SDRLs Specialty Engineering including FMECA, R&M, Supportability, System Health, and Human Engineering EME/EEE & Product Security including EMC, TEMPEST, System Security, and Cyber Collaboration with System Safety Function including CSIs, Hazard analysis, and SSWGs Position Responsibilities Responsible for integration across the Air Proprietary program statement of work ensuring synchronized work is accomplished in support of the integrated master schedules and in compliance to customer requirements Oversees translating strategies int

Senior Nondestructive Test (NDT) Technician Company: Boeing Defense, Space & Security (BDS) has an exciting opportunity for a Senior Nondestructive Test (NDT) Technician - UT & RT to join our Quality Fabrication organization in St . Louis, MO! Join our dynamic and supportive Quality team! In this role, you will conduct Non-Destructive Testing (NDT) on aerospace products using cutting edge methods including ultrasonic (UT), eddy current (ET), and/or radiographic (RT). You will work with digital and automated inspection systems in an aerospace environment aligned with industry standards and regulations. Opportunities for rapid skill growth and progress depending on performance. Employees will be required to obtain Boeing NDT certification and pass a vision exam. Failure to achieve or maintain certification requirements may lead to termination of employment. Candidates must have documented evidence of NDT certification, education and/or OJT hours in UT or RT available for Boeing Level 3 review Work Environment : May be exposed to noise, dust, fumes, airborne particles, smoke (not over OSHA permissible exposure levels). This position requires the applicant to work in a radiation environment and involves exposure to radiation. Candidates must demonstrate a strong understanding of relevant safety and health regulations, protocols, policies, and procedures to ensure a safe working atmosphere for self and others. Safety training and equipment are provided by Boeing in accordance with applicable laws, industry standards, and company policies. Will be required to wear Personal Protective Equipment (PPE) applicable to the testi

F/A-18 Senior Systems Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Senior Systems Engineer to join the F/A-18 Systems Engineering Integration and Test (SEIT) Team in Berkeley, MO . The Senior Systems Engineer is responsible for leading cross-functional integration to drive engineering excellence in the execution of our F/A-18 software development activities. The individual selected for this role will be primarily focused on the Technical Integration role for Software Development and Advanced Systems activities. Position Responsibilities Ensure Engineering Excellence: Responsible for leading integration across multiple engineering and program teams to ensure safety, technical excellence, and product integrity. Drives adherence to Boeing and program processes, setting high standards for quality and performance Systems Engineering Approach: Ensure an integrated systems engineering approach. Take ownership to manage requirements and ensure full traceability. Manage the configuration of the integrated system to ensure dependencies are well understood. Responsible for ensuring comprehensive certification and verification activities, demonstrating a commitment to excellence Build Strategic Partnerships: Develop and nurture strong relationships with the United States Navy (USN), engineering functions, and program management. Leverage these partnerships to enhance collaboration and drive program success Manage Technical Baseline: Oversees the technical baseline, including mission systems configuration, technical performance measures, architecture diagrams, and Risk Identification and Opportunity (RIO) assessments. Foster

Senior Low Observables (LO) Mission Systems Integration Engineer Company: The Boeing Company The Senior LO Mission Systems Integration Engineer will lead design, integration, analysis, test, and production activities for low observable materials, structures, apertures, sensors, and radomes for mission systems. The role requires strong technical leadership, independent execution of complex tasks, advanced use of computational electromagnetic (CEM) solvers, and the ability to produce and defend technical results with minimal oversight. Key Responsibilities Lead design, modeling, and analysis efforts for LO materials, coatings, structures, and integrated mission systems to meet signature reduction and performance requirements. Independently apply CEM solvers (e.g., FEKO, HFSS, CST, WIPL‑D, xFDTD, or equivalent) to model antennas, apertures, radomes, and LO treatments; perform design optimization and trade studies. Drive integration of LO treatments with mechanical, thermal, and sensor/antenna system constraints; identify and mitigate producibility, testability, and sustainment risks. Plan, execute, and oversee laboratory and field tests (anechoic chamber measurements, antenna/radome characterization, RCS measurements); lead data collection, reduction, and validation activities. Develop and validate predictive models, reconcile simulations with measurements, perform uncertainty quantification, and provide actionable recommendations to engineering and program leadership. Produce high-quality technical documentation: test plans, test reports, technical memoranda, design reviews, and customer briefings. Mentor and provide technical oversight to junior engineers and technicians; ensure adherence to engineering processes, qual

Experienced Low Observables Mission Systems Integration Engineer Company: The Boeing Company We are seeking a Low Observables (LO) Design & Integration Engineer to support design and analysis activities for stealth/low-signature systems. The engineer will perform LO material and structure design, electromagnetic analysis, integration and test support, data processing, and technical reporting. The role requires practical experience with LO materials and technologies, solid electromagnetics knowledge, and hands-on expertise with computational electromagnetic (CEM) solvers used to design and optimize LO solutions. Key Responsibilities Perform design and analysis tasks for LO materials, coatings, treatments, and structural treatments to minimize radar, infrared, and other signatures. Develop and validate LO integration concepts for aircraft/vehicle structures and subsystems, including manufacturability and testability considerations. Use CEM solvers to model, simulate, and optimize LO components and systems (e.g., surface treatments, RAM, apertures, seams, RAM-structure interactions). Perform sensitivity studies and trade-offs across materials, geometry, and integration approaches to meet system-level LO requirements. Process and analyze measured test data from laboratory and flight/field tests; compare test results to simulation and iterate designs. Produce technical documentation: detailed analysis reports, integration guidance, test plans, and summaries suitable for engineering and program management audiences. Communicate technical results and recommendations to multidisciplinary teams and support design reviews. Support manufacturing and test engineering to ensure LO design intent is preserved through fab

JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. GMP Cleaner - JLL What this job involves: This position requires strict adherence to current Good Manufacturing Practices (cGMPs), established cleaning policies and procedures, to maintain compliance with quality standards and FDA regulations. The incumbent plays a critical role in assuring sanitary conditions of the controlled areas are maintained, to allow for the manufacturing of biopharmaceuticals. Standard Operating Procedures (SOPs) must be followed and strictly enforced to ensure acceptable environmental monitoring results of the cleaned GMP environment are maintained. Appropriate room and equipment sanitization records are neat and accurate, and that professional behavior is always displayed within the controlled areas. What your day-to-day will look like: Perform sanitization and cleaning per governing SOPs in GMP spaces Sanitization activities will be performed with ceiling mops, wall mops, floor mops, and wipers Responsible for verifying that the proper sanitization disinfectant rotation is followed, and that the proper sanitization disinfectant is used for each cleaning assignment Strictly follow Standard Operating Procedures Responsible for completing required GMP documentation to ensure records are properly and accurately maintained Responsib