Robotics Platform Development Manager in San Francisco

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Lead Robotics Safety Engineer to define and lead the product safety strategy for our robotics program. You will work closely with leadership, engineering, research, legal, and policy teams to ensure safety is integrated into our products from the earliest stages of development through deployment. This role combines product safety, regulatory strategy, systems engineering, and risk management. You will help shape how we think about safety across robotic platforms, influence product architecture and development decisions, and ensure our systems are designed to meet both current and emerging regulatory expectations. You will serve as a subject matter expert on robotics safety standards, regulatory frameworks, and safety engineering practices while helping establish the long-term safety strategy for our products and organization. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will Define and lead the product safety strategy for robotic systems across the development lifecycle. Monitor and influence emerging regulatory frameworks, industry standards, and policy developments relevant to robotics and autonomous systems. Partner with engineering teams to translate safety requirements into product architecture, design decisions, and engineering requirements. Develop and maintain system-level hazard analyses, risk assessments, and safety cases for robotic products. Establish safety requirements, verification strat

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We're looking for an experienced Electrical Engineer to help develop the next generation of robotic systems at OpenAI. This role spans the full lifecycle of hardware development, from early concept exploration and prototyping through circuit design, component selection, PCB layout, bring-up, integration, and deployment. Engineers in this role are expected to independently drive significant hardware efforts from initial concept through deployment. You will translate ambiguous goals into concrete engineering plans, make key technical decisions, coordinate closely with cross-functional partners, and own execution through the iterations required to deliver a successful system. Many of the systems we build are still being defined. You will work closely with mechanical, firmware, software, controls, and research teams to evaluate new ideas, develop novel hardware, and integrate it into robotic platforms. Success in this role requires strong engineering judgment, comfort operating in ambiguous spaces, and the ability to balance rapid experimentation with the discipline required to build reliable and scalable systems. The ideal candidate enjoys building things from first principles and is equally comfortable evaluating a new technology, debugging a prototype on the bench, reviewing PCB layout details, and driving system integration efforts. You should be able to move quickly when appropriate, but also know when investing in robustness, simplicity, or infrastructure will create leverage for future development. This role is

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Design Engineer to lead the development of motor mechanical designs and prototype hardware for advanced robotic systems. You will own stator and rotor mechanical development from early concepts and detailed design through hands-on builds and prototype validation, partnering closely with electromagnetic, electrical, test, and manufacturing teams. This role focuses on the design, integration, and validation of motor components and prototype processes, including laminations, stack assemblies, bobbins, winding interfaces, and fixtures. You will help drive motor development from initial design through repeatable low-volume builds while establishing the tooling, work instructions, and validation practices needed for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Own stator and rotor mechanical designs and released CAD and drawings, including geometry, interfaces, fits, tolerances, retention, assembly access, and mechanical validation. Develop laminations, stack assembly methods, bobbins, and winding interfaces that control alignment, insulation, conductor placement, and end-turn packaging. Design, fabricate, and debug fixtures for winding, stacking, assembly, alignment, and inspection. Build and troubleshoot prototypes. Use measurements, defects, rework, and assembly effort to improve designs and processes. Establish low-volume prototype production with equipment, build sequences, work instructions, revision control, traceability

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Mechanical Engineer to lead the design, integration, and sustaining engineering of mechanical subsystems in robotic platforms. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design — including tolerance, alignment, load paths, wear, and failure modes — and robotics. You will contribute to real hardware programs moving from prototype through early production. You will lead both new subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including structures, mechanisms, and actuators. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufacturing partners

About the Team The Software Engineering Firmware team builds reliable, high-performance systems on custom hardware. We work closely with hardware engineers to design, optimize, and ship software that bridges cutting-edge devices and real-world constraints like memory, power, and latency. Our work spans early prototyping through product launch, ensuring that our embedded platforms are robust, efficient, and production-ready. About the Role As a Firmware Engineer , you will design, implement, and debug software for embedded devices. You’ll own low-level bring-up, write production C/C++ code, and partner closely with hardware teams to deliver reliable, high-performance systems. We’re looking for engineers with deep embedded expertise, strong debugging skills, and a passion for building systems that perform under real-world conditions. This role is based in San Francisco, CA . We use a hybrid work model of four days in the office per week and offer relocation assistance to new employees. In this role, you will: Design, implement, and debug software for embedded devices. Contribute to defining software requirements, interfaces, and test plans. Bring up and debug new boards. Analyze performance, memory, and power profiles and implement optimizations. Investigate field issues, perform root-cause analysis, and deliver robust fixes. Foster good software engineering practices. You might thrive in this role if you: Have deep experience shipping embedded systems (around 10+ years). Are proficient in C and C++. Are familiar with embedded toolchains, operating systems, and debugging tools. Have experience with both rapid prototyping and scalable product development. (Nice to have) Have experience with Zephyr RTOS. (Nice to have) Have worked with networking/wireless stacks (BLE, Wi-Fi). (Nice to have) Have experience with robotic system bring-up or Linux kernel development. About OpenAI OpenAI is an AI research and deployment company dedicated to ensuring that general-purpose arti

About the Team The OpenAI Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role As a Software Engineer, Distributed Data Systems, you will design, build, and operate some of the largest distributed data systems in the world. You will be responsible for the end-to-end stack to deliver and consume top-quality data for robotics training at exabyte-scale. You’ll manage distributed data pipelines, collaborate closely with researchers to translate requirements into robust systems, and harden pipelines that serve as the backbone for OpenAI’s rapid iteration cycles. We’re looking for engineers who are detail-oriented, have strong experience with distributed systems, and excel at building reliable, large-scale systems in high-stakes environments. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Design, build, and maintain data infrastructure such as exabyte-scale distributed data processing, data selection, automated labeling, and training data loaders. Ensure our data platform can scale by orders of magnitude while remaining reliable and efficient. Partner with researchers to deeply understand requirements and translate them into production-ready systems. Harden, optimize, and maintain critical data infrastructure systems that power multimodal training and evaluation. Deliver the best possible data for training robotics models. You might thrive in this role if you: Have strong experience with distributed systems and large-scale infrastructure with a strong interest in data. Are detail-oriented a

About the Team The OpenAI Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role As a Research Engineer, Distributed Data Systems, you will design and scale the infrastructure that powers large-scale multimodal training and evaluation at OpenAI. You’ll manage distributed data pipelines, collaborate closely with researchers to translate requirements into robust systems, and harden pipelines that serve as the backbone for OpenAI's rapid iteration cycles. We’re looking for engineers who are detail-oriented, have strong experience with distributed systems, and excel at building reliable infrastructure in high-stakes environments. This role is based in San Francisco, CA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. In this role, you will: Design, build, and maintain data infrastructure systems such as distributed compute, data orchestration, distributed storage, streaming infrastructure, machine learning infrastructure while ensuring scalability, reliability, and security. Ensure our data platform can scale by orders of magnitude while remaining reliable and efficient. Partner with researchers to deeply understand requirements and translate them into production-ready systems. Harden, optimize, and maintain critical data infrastructure systems that power multimodal training and evaluation. You might thrive in this role if you: Have strong experience with distributed systems and large-scale infrastructure with a strong interest in data. Are detail-oriented and bring rigor to building and maintaining reliable systems. Demonstrate excellent software enginee

About the Team The Finance Platform & Technology team at OpenAI builds and scales the future-proof systems and data architecture that power our core financial operations. We enable business agility, compliance, and operational excellence across quote-to-cash, procure-to-pay, inventory, and asset management for both B2B and B2C. Our focus is on modernizing workflows through strategic integrations, scalable automation, and seamless data flows empowering smarter decisions, reliable reporting, and sustainable growth as OpenAI evolves About the Role We are looking for a Supply Chain Transformation Architect to redesign and modernize our end-to-end supply chain operations supporting robotics, consumer hardware, and data center infrastructure. This role sits at the intersection of process, systems, and data. Your primary focus will be transforming supply chain processes across planning, procurement, manufacturing, logistics, and fulfillment—then enabling those processes with the right systems architecture, data foundation, and AI-driven automation. You will help move the organization from manual, reactive operations to intelligent, data-driven supply chain execution. In this role you will: Lead End-to-End Supply Chain Transformation Evaluate and redesign core supply chain processes across demand planning, supply planning, procurement, manufacturing operations, logistics, and fulfillment. Identify operational bottlenecks, fragmented workflows, and manual processes that limit scalability. Build standardized process frameworks and operating models that support rapid scaling of hardware programs. Drive Operational Excellence Implement structured supply chain practices such as: S&OP / Integrated Business Planning Supply risk management Inventory optimization Supplier collaboration frameworks Logistics visibility and execution models Establish operational KPIs and governance to improve predictability, responsiveness, and resilience. Architect the Digital Supply Chain Tra

What you’ll do Act as the technical lead for large parts of the scanner platform: system architecture, codebase structure, and long-term maintainability. Own core runtime foundations: distributed control, state management, fault handling, and reliability. Drive engineering rigor: testability, code quality, review standards, performance regression prevention, and release processes. Build robust observability: logs, metrics, traces, and replayable diagnostics (with privacy constraints). Collaborate with hardware and recon/ML teams to define interfaces, data contracts, timing/synchronization, and failure modes. Lead complex refactors (e.g., message passing / RPC boundaries, modularization, concurrency model) without halting forward progress. What we’re looking for Deep software architecture experience for real-world systems: robotics, instrumentation, medical devices, or other complex distributed products. Strong Python and concurrency background (asyncio, multiprocessing, profiling, performance engineering). Track record of shipping systems that are observable, debuggable, and resilient. Strong technical leadership: clarity, pragmatic trade-offs, and mentoring. Useful experience Building but rock-solid systems: clear interfaces (gRPC/protobuf or equivalent), strong state modeling, and failure handling. High-leverage engineering habits on a lean team: good tests, CI, reproducible dev environments, and fast code review. Practical performance + concurrency work in Python (asyncio, profiling, multiprocessing) and comfort debugging distributed behavior. Security-minded device software: safe defaults, encrypted data paths, and disciplined handling of PII/PHI. Operational thinking: remote updates/management, excellent logging, and diagnostics that make real hardware debuggable.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We're seeking talented Robotics Software Engineers to expand our robotics data collection and evaluation program. This highly technical role involves designing, implementing, and optimizing software solutions across diverse robotics hardware. You'll work closely and collaboratively with multidisciplinary teams; including software, hardware, research, and operations - to drive advancements in our robotic systems. This role is based in San Francisco, CA, and requires in-person 4 days a week. In this role, you will: Help develop and grow our data collection labs, owning the entire integration lifecycle, from identifying and sourcing new hardware to collaborating with mechanical and electrical engineers on setup, software integration, and operational deployment. Develop innovative robot control interfaces suited to a variety of morphologies, environments, and tasks. Collaborate closely with research and engineering teams to develop automation tools and machinery that facilitate the evaluation of advanced robotic policies. Lead the design and implementation of data collection, visualization, and quality control processes. You might thrive in this role if you: Have 5+ years of professional software engineering experience developing and shipping production-quality systems in robotics or hardware-integrated environments. Have extensive experience integrating and deploying industrial automation systems, off-the-shelf robotics platforms, or custom hardware into production environments. Bring hands-on experience delivering production-quality software