Actuator Electromagnetic Design Engineer Jobs

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking Manufacturing Engineers to lead the development of processes, tooling, and prototype builds for custom motors and actuators. You will own a primary area as a Stator Process / Manufacturing Engineer, Tooling / Fixture Engineer, or Prototype Manufacturing Engineer, taking that work from early development through validation and repeatable execution in close partnership with mechanical, electromagnetic, electrical, test, quality, and supplier teams. These roles focus on the development, integration, and validation of electromechanical manufacturing capabilities, including stator winding processes, assembly and inspection tooling, and actuator prototype builds. You will help translate engineering designs into reliable hardware while establishing scalable processes, equipment, and build practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 5 days a week. In this role, you will Each opening focuses on one of the three specialties below, with shared responsibility for reliable processes and hardware. Stator Process / Manufacturing: develop and validate stacking, winding, termination, and potting processes. Establish process parameters, work instructions, and defect controls that produce consistent results across trained operators. Tooling / Fixture: design and deliver winding tools, assembly fixtures, inspection gauges, and bench equipment, from CAD and drawings through fabrication, commissioning, and troubleshooting. Improve setup time, labor, and repeatability. Prototype M

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Actuator Gear Design Engineer to lead the development of custom gears and gear stages for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, and reliability teams. You will partner with external suppliers and internal manufacturing to create full gearbox assemblies. This role focuses on the design, integration, and validation of precision gearing, including broader knowledge around motor electromagnetics, transmission types, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuator gearing. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, back drivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-lo

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Senior Actuator Design and Integration Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the architecture, design, and integration of custom robotic actuators, including motors, transmissions, sensing, thermal systems, structural components, and packaging. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, backdrivability, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop pe

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design, build, and own the mechanical side of our robotic actuator dynamometer and test infrastructure. You will create the test stands, couplings, fixtures, load paths, guarding, and serviceable lab hardware that enable rigorous characterization of robotic actuators. This role combines precision mechanical design with hands-on lab work. You will take robotic actuator test infrastructure from requirements and analysis through CAD, fabrication, assembly, commissioning, and iteration, partnering closely with electrical and software engineers to deliver safe, flexible, high-uptime test cells. In this role, you will Own the mechanical architecture of dynamometer and actuator test cells, including frames, bases, load paths, alignment, guarding, and serviceability. Design dynamometer structures, robotic actuator fixtures, load-motor mounts, couplings, shafts, bearings, adapters, and torque-reaction hardware. Translate robotic actuator test requirements into robust mechanical systems for torque, speed, thermal, durability, backdrive, efficiency, and failure testing. Perform first-principles analysis and simulation for stiffness, strength, fatigue, vibration, thermal growth, critical speed, and safety factors. Create precise, repeatable alignment strategies that protect test articles, load machines, sensors, and couplings. Design modular fixturing that supports rapid changeover across actuator and motor variants without compromising measurement quality. Work closely with electrical engineers on cable routing

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

About Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We are looking for a Technical Program Manager to own actuator development and integration from system goals through production readiness. The actuator program spans mechanical, electrical, firmware, harnessing, controls, test, reliability, manufacturing, and supply chain, and needs a TPM who can turn cross-functional decisions into clear scope, executable milestones, and timely decisions. In this role, you will help the team converge on the right technical plan, surface risks early, and deliver reliable actuator systems on schedule. This role is based in San Francisco, CA and requires in-person presence 4 days a week. In this role you will: Drive actuator programs end-to-end, aligning scope, milestones, interfaces, dependencies, and exit criteria across engineering teams. Drive scope lock and technical convergence for sprints, MVPs, and stretch goals while connecting component decisions to system performance. Coordinate actuator development across motors, gears, sensing, electronics, and firmware, and align the electrical and mechanical interfaces that connect actuators to the broader robot. Lead validation planning from early prototypes through engineering validation, reliability testing, and production readiness. Drive tradeoff decisions across cost, quality, performance, schedule, and lead time by collaborating cross-functionally and quantifying impact to meet program deliverables. Establish effective mechanisms for technical reviews, change control, design releases, decision tracking, and manufacturing readiness.

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We’re looking for a Robotics Control Systems Engineer to take on a foundational role within our robotics team. You’ll help architect, implement, tune, and verify the control infrastructure that enables intelligent, reliable, and responsive robot behavior. This is a deeply hands-on role focused on real-time systems, actuation, dynamics, low-level hardware interaction, and whole-robot performance. You’ll spend significant time working directly with robots onsite: debugging behavior, tuning subsystems, running experiments, and providing feedback across mechanical, electrical, and software teams. This role is based in San Francisco, CA, and requires in-person 5 days a week. In this role, you will: Design and implement real-time control algorithms for robotic systems, including motion control, feedback loops, state estimation, actuator control, and subsystem tuning. Define the control architecture from low-level actuators and hardware interfaces through whole-robot behavior and policy. Identify and characterize actuator, hardware, and software parameters through rigorous experimentation, testing, commissioning, and verification. Work with machine learning engineers to implement reinforcement learning models. Collaborate across mechanical, electrical, and software teams to integrate control logic with sensing and actuation hardware. Help inform the mechanical and electrical design to maximize capability and flexibility. Create the control system architecture; determine the correct level of abstraction from actuators all the way up to whole-robot

About Us: Samara Aerospace is revolutionizing satellite design by addressing the challenges of deploying and managing large satellite constellations. Our innovative Hummingbird spacecraft bus offers a modular and scalable platform that streamlines satellite production and deployment, significantly reducing launch costs. Hummingbird's compact architecture maximizes launch capacity, making it the most efficient and agile spacecraft in the industry. At the core of our technology is the patented Multifunctional Structures for Attitude Control (MSAC) system. Unlike traditional wheel-based pointing control systems, MSAC utilizes actuators embedded in the hinges of deployable solar panels to provide 3-axis attitude control and active jitter cancellation. This design eliminates the need for spinning wheels, reducing mass and potential points of failure, while enhancing pointing precision. Role: The Electrical Engineering team at Samara is seeking an Electrical Engineer to lead the design, layout, and testing of printed circuit boards for spacecraft electronics at our headquarters in San Francisco. This is a startup environment where you will own designs end-to-end, from early concept through production. A strong problem-solving background, hands-on testing skills, and experience with high-density PCB design and electronics integration. You'll work closely with experienced electrical, mechanical, and embedded software engineers to ensure the Hummingbird satellite's electronics are robust, manufacturable, and ready for the space environment. Responsibilities: Own PCB Design from circuit design, schematic capture, and PCB layout through bring up testing. Conduct trade studies that balance electrical performance, signal integrity, thermal management, manufacturability, cost, and schedule. Collaborate with embedded software engineers during board bring-up, debugging, and hardware-software integration. Support spacecraft and board-level integration, including hands-on assi

IoT Hardware Engineer Build the Future of Smart Connected Devices Join our growing team as an IoT Hardware Engineer and work on exciting IoT solutions that combine electronics, embedded systems, and smart technologies. We are looking for a passionate, hands-on engineer who enjoys designing, building, testing, and improving real-world connected devices. Key Responsibilities: Design, develop, and prototype IoT devices using ESP32 microcontrollers. Develop and integrate firmware, hardware components, and embedded systems. Select and evaluate sensors, actuators, communication modules, and electronic components for IoT applications. Participate in hardware design reviews and product improvement discussions. Assemble, test, and debug electronic prototypes for performance and reliability. Troubleshoot hardware and software issues using professional debugging techniques. Required Skills & Experience: ITI, Diploma in IT Hardware Engineering, Computer Engineering, Electronics, or related field (highly preferred). Strong experience in programming and working with microcontrollers, especially ESP32. Experience with embedded platforms such as ESP32, STM, and similar systems. Knowledge of sensor interfacing using I2C, SPI, UART, and other communication protocols. Excellent PCB soldering skills and experience building complex electronic prototypes. Strong understanding of electronics fundamentals including resistors, voltage levels, power management, and circuit design. Ability to use testing tools such as oscilloscopes and logic analyzers for debugging circuits. Preferred Skills: Experience with KiCad or other hardware design tools. Knowledge of low-power design techniques for battery-operated IoT devices. Understanding of power optimization and embedded system efficiency. Familiarity with Agile development methodologies. Who We’re Looking For: A creative and skilled IoT enthusiast who loves turning ideas into working hardware products. If you enjoy experimenting with e

A World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role We are seeking a Senior Software Engineer to join a customer-facing product engineering team focused on developing advanced Command and Control (C2) and Agentic Autonomy Software for Autonomous Systems for use in operational and tactical missions. This role involves building, integrating, and deploying state-of-the-art software solutions that combine sensors, actuators, unmanned vehicles, and intelligent decision-making systems including self-hosted and commercial LLMs to enable users to employ and manage robotic and autonomous systems across a variety of mission sets. You will work alongside other experts in sensing, artificial intelligence, physics and simulations, user experience, and edge system engineering to build and deliver solutions that redefine complex military and civilian mission scenarios in the real world. As a part of this team, you will contribute directly to the development of cloud and edge software to command and control autonomous systems, including interfacing with onboard sensors (radar, cameras, RF, and other modalities) and real-time kinetic and non-kinetic systems for individual and swarms of systems. You will work alongside other experts in sensing, artificial intelligence, and systems engineering to shape solutions that redefine complex area defense scenarios.

A World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role We are seeking a Senior Software Engineer to join a customer-facing product engineering team focused on developing advanced Command and Control (C2) and Agentic Autonomy Software for Autonomous Systems for use in operational and tactical missions. This role involves building, integrating, and deploying state-of-the-art software solutions that combine sensors, actuators, unmanned vehicles, and intelligent decision-making systems including self-hosted and commercial LLMs to enable users to employ and manage robotic and autonomous systems across a variety of mission sets. You will work alongside other experts in sensing, artificial intelligence, physics and simulations, user experience, and edge system engineering to build and deliver solutions that redefine complex military and civilian mission scenarios in the real world. As a part of this team, you will contribute directly to the development of cloud and edge software to command and control autonomous systems, including interfacing with onboard sensors (radar, cameras, RF, and other modalities) and real-time kinetic and non-kinetic systems for individual and swarms of systems. You will work alongside other experts in sensing, artificial intelligence, and systems engineering to shape solutions that redefine complex area defense scenarios.

A World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role We are seeking a Senior Software Engineer to join a customer-facing product engineering team focused on developing advanced Command and Control (C2) and Agentic Autonomy Software for Autonomous Systems for use in operational and tactical missions. This role involves building, integrating, and deploying state-of-the-art software solutions that combine sensors, actuators, unmanned vehicles, and intelligent decision-making systems including self-hosted and commercial LLMs to enable users to employ and manage robotic and autonomous systems across a variety of mission sets. You will work alongside other experts in sensing, artificial intelligence, physics and simulations, user experience, and edge system engineering to build and deliver solutions that redefine complex military and civilian mission scenarios in the real world. As a part of this team, you will contribute directly to the development of cloud and edge software to command and control autonomous systems, including interfacing with onboard sensors (radar, cameras, RF, and other modalities) and real-time kinetic and non-kinetic systems for individual and swarms of systems. You will work alongside other experts in sensing, artificial intelligence, and systems engineering to shape solutions that redefine complex area defense scenarios.

A World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role We are seeking a Senior Software Engineer to join a customer-facing product engineering team focused on developing advanced Command and Control (C2) and Agentic Autonomy Software for Autonomous Systems for use in operational and tactical missions. This role involves building, integrating, and deploying state-of-the-art software solutions that combine sensors, actuators, unmanned vehicles, and intelligent decision-making systems including self-hosted and commercial LLMs to enable users to employ and manage robotic and autonomous systems across a variety of mission sets. You will work alongside other experts in sensing, artificial intelligence, physics and simulations, user experience, and edge system engineering to build and deliver solutions that redefine complex military and civilian mission scenarios in the real world. As a part of this team, you will contribute directly to the development of cloud and edge software to command and control autonomous systems, including interfacing with onboard sensors (radar, cameras, RF, and other modalities) and real-time kinetic and non-kinetic systems for individual and swarms of systems. You will work alongside other experts in sensing, artificial intelligence, and systems engineering to shape solutions that redefine complex area defense scenarios.

A World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role We are seeking a Forward Deployed Software Engineer to join a newly-formed team focused on developing advanced autonomous systems for use on the edge and in austere environments for military and commercial uses. This role involves building, integrating, and deploying state-of-the-art solutions that combine sensors, actuators, unmanned systems, and intelligent decision-making systems to provide remote and autonomous control of individual and swarms of systems. As a part of this team, you will contribute directly to the development and deployment of autonomous systems that integrate sensors (IMU, autopilot, cameras, radars, RF, and other modalities) with continuous and real-time response actuation, path planning, and other kinetic and non-kinetic systems. You will work alongside other experts in sensing, artificial intelligence, and systems engineering to build and deliver solutions that redefine complex real world scenarios.