High Speed Hardware Developer Jobs

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Industries is looking for highly motivated engineers to lead firmware validation of all individual vehicle components as well as system level validation. This role requires strong electrical engineering fundamentals, deep technical understanding of avionics hardware components and experience in design and execution of validation plans from new product design phase to manufacturing. Key Responsibilities Close collaboration with Firmware Engineers, Avionics Engineers, Manufacturing and Flight Operations to enable high quality firmware releases used in flight test operations and deployed to our customer products. Design and execution of system level (airframe) and individual component comprehensive test specifications (nominal and fault-injection scenarios). Develop software in Software-in-the-Loop (SITL) and Hardware-in-the-Loop (HITL) simulation tests scenarios supporting the test specifications. Execute SITL and HITL tests and investigate issues identified in the test runs. Reproduction and investigation of issues found during test flight operations. Constantly improve the available tooling and bring up new tools that will improve the validation iteration times and will scale to all current and future airframe variants. Required Qualificati

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Industries is seeking a GNC Engineer, Modeling & Simulation to design, build, and maintain high-fidelity aircraft simulation environments in support of Guidance, Navigation, and Control (GNC) development. You will be responsible for realizing equations of motion in software, developing and validating aerodynamic and plant models, and creating the simulation infrastructure required for both software-in-the-loop (SITL) and hardware-in-the-loop (HITL) testing. This role is ideal for an engineer who thrives at the intersection of physics-based modeling, software development, and systems integration. You’ll collaborate closely with aerodynamicists, controls engineers, and hardware teams to ensure Mach’s autonomous platforms are accurately modeled and rigorously tested before flight. Key Responsibilities Develop and maintain high-fidelity flight dynamics and vehicle simulation models. Implement equations of motion in C++ and Python for real-time and offline simulation environments. Collaborate with the aerodynamics team to incorporate aerodynamic models derived from CFD and wind tunnel testing. Perform system identification and parameter estimation to generate accurate plant models. Build and sustain simulation infrastructure supp

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Energetics is seeking a Manufacturing Engineer to own the industrialization of our products for high-rate production. In this role, you will work closely with the mechanical design and production teams to develop processes, tooling, and build documentation that ensure builds are repeatable, cost-effective, and meet stringent quality standards. This role is focused on building at scale—delivering reliable hardware every time. Key Responsibilities Fully own production processes from build readiness through steady-state manufacturing. Design and qualify manufacturing equipment, fixtures, tools, and jigs to enable repeatable builds. Develop, document, and release controlled work instructions and quality gates to ensure repeatability and reliability. Drive the optimization of Design for Manufacturing (DFM) and Assembly processes, focusing on content reduction, assembly simplification, and built-in quality. Provide daily production support and implement SPC, PFMEA, and root cause corrective action for non-conformances. Travel to machine suppliers and contract manufacturers to oversee equipment bring-up and manufacturing trials. Partner with technicians to train, enforce standard work, and improve safety/ergonomics. Work with supply chain to ensur

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role The Fabrication Technician plays a critical role in hands-on prototyping and advanced manufacturing, supporting a wide range of projects including custom test rig builds, structural aircraft modifications, and bespoke hardware for R&D efforts. This position demands precision welding, sheet metal fabrication, and machining expertise, particularly in aluminum, stainless steel, and titanium, as well as the ability to read and interpret technical drawings and CAD models. Candidates should bring a deep understanding of fabrication techniques, including basic CNC, waterjet operation, TIG welding, and general metalworking. Being comfortable adapting processes in a fast-moving, highly iterative environment is of utmost importance as well. Success in this role requires an eye for detail, a strong mechanical aptitude, and seamless collaboration with engineers and technicians across disciplines. The technician must be willing and available to work swing shifts to support critical development timelines. Key Responsibilities Fabricate vehicle components, structural assemblies, and custom test fixtures using TIG welding, sheet metal techniques, and general metalworking. Perform high-quality welds (horizontal, vertical, and overhead) on aluminum, stainless

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Industries is seeking Mechanical Design Engineers to join our revolutionary new division, Mach Propulsion. We’re developing a high-performance small turbine engine from the ground up, designed for scalable, high-rate manufacturing. This is a unique opportunity to apply your experience to a first-of-its-kind propulsion system. We’re looking for engineers with foundational experience in propulsion, drivetrain systems, or rotating machinery who are excited to solve complex engineering problems in a fast-paced, hands-on environment. Key Responsibilities Design and Development: Design turbojet engine components and subsystems using Siemens NX, leveraging tools such as CAD, CFD, and FEA. Produce 3D models and 2D drawings optimized for manufacturing and performance. Full Lifecycle Ownership: Participate in concept generation, trade studies, prototyping, testing, and iteration. Engage directly with test teams to validate your hardware. Team Collaboration: Work closely with fabrication, machining, test, and engineering teams to ensure high-quality, on-time delivery of components. Required Qualifications BS in Mechanical, Aerospace, Electrical Engineering or related field. 1+ years of mechanical engineering experience in propulsion, powertrain,

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role As Lead Manufacturing Engineer, Test, you will be the technical owner of production testing across all products and subsystems. This scope includes PCB flashing and configuration, component and subassembly test, end-of-line (EOL) system functional test, and final acceptance. You will define what gets tested, where, and how. You will design, source, and launch the stations, fixtures, software, and data flows that make it work at rate. You will work across Product Engineering, Firmware, Manufacturing Engineering, Controls, Quality, Supply Chain, and Operations so that design intent becomes repeatable, high-coverage, data-rich production testing. This is a hands-on technical role with direct reports. You will set the technical direction for your test area and guide the engineers, technicians, and integrators working on it. You will also be on the floor bringing up stations, debugging failures, and keeping hardware moving. Key Responsibilities Own production test strategy and execution for assigned products and subsystems, from incoming and component test through subassembly test, EOL functional test, rework and retest, and final acceptance. Turn product requirements, design intent, and DFMEA/PFMEA risks into test requirements, coverage maps, test l

About Goods & Services Goods & Services is a product design and engineering company. We solve mission-critical challenges for some of the world’s largest enterprises, with deep expertise in highly regulated industries—including life sciences and financial services . Our design-led approach allows us to apply cutting-edge capabilities in AI, Data and Hardware Engineering to companies of any size. Headquartered in the United States , we operate regional development centers in Mexico and the United Kingdom . This global footprint—anchored by our nearshore model—enables us to deliver at scale with the speed, efficiency, and cultural alignment our clients expect. At Goods and Services, we value diversity and are committed to creating an inclusive workplace where everyone can thrive. We are proud to be an Equal Opportunity Employer and welcome qualified applicants from all backgrounds. About the job Goods & Services is looking for a Senior Mobile Engineer (AI-Assisted) to design, develop, and maintain a cross-platform mobile application serving both iOS and Android users. The ideal candidate has strong experience building production-ready mobile applications using React, TypeScript, and Capacitor, and has successfully managed deployments to both the Apple App Store and Google Play Store. This role requires a hands-on engineer who is comfortable working across web and mobile technologies, developing native integrations when needed, and maintaining high standards for code quality and type safety. This is an Onsite position in South Carolina. What you’ll do: Design, develop, and maintain mobile applications for iOS and Android using React and Capacitor. Build scalable, maintainable, and high-performance user interfaces using React 18 and TypeScript. Develop and maintain native mobile integrations and Capacitor plugins as needed. Configure and manage build environments using Vite. Collaborate with backend, product,

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach's Summer 2027 Engineering Internship, Software is open for future engineers and builders who want to work with us. This is a paid, in-person, 12-week internship. Depending on your background and team placement, you might work on: Guidance, Navigation & Control (GNC) — guidance algorithms, state estimation, trajectory planning, feedback control, and autonomy for unmanned platforms Flight & autonomy software — real-time software, flight control systems, autonomy stacks, and algorithms for next-generation vehicles Embedded software — low-level firmware, device drivers, hardware interfaces, and real-time systems running on embedded platforms Simulation & modeling — high-fidelity simulations, digital twins, hardware-in-the-loop testing, and tools for developing and validating autonomous systems Perception & sensor fusion — processing data from cameras, IMUs, GPS, radar, and other sensors to enable reliable navigation and situational awareness Testing & validation — software-in-the-loop, hardware-in-the-loop, automated testing, flight testing, and analyzing system performance under demanding conditions Sy

Tenstorrent is leading the industry on cutting-edge AI technology, revolutionizing performance expectations, ease of use, and cost efficiency. With AI redefining the computing paradigm, solutions must evolve to unify innovations in software models, compilers, platforms, networking, and semiconductors. Our diverse team of technologists have developed a high performance RISC-V CPU from scratch, and share a passion for AI and a deep desire to build the best AI platform possible. We value collaboration, curiosity, and a commitment to solving hard problems. We are growing our team and looking for contributors of all seniorities. We are looking for a talented engineer to build and run the performance infrastructure across RISC-V hardware and software. This is the plumbing that both teams' performance work stands on — benchmarking automation, data collection, and workload capture across silicon, FPGA/emulation platforms and performance models. You'll work across both teams, enabling performance and software engineers to spend their time on analysis and optimization instead of running experiments by hand. This role is remote, based out of the US or Australia, can also be hybrid from Austin, TX or Santa Clara, CA. We welcome candidates at various experience levels. During the interview process, candidates will be assessed for the appropriate level, and offers will align with that level, which may differ from the one in this posting. Who You Are Great at identifying problems and developing solutions, with a bias toward owning the systems you build. Enjoys building tools and optimizing workflows so other engineers can move faster. Strong Linux systems engineer, comfortable wrangling lab machines, clusters and flaky hardware platforms. Skilled in Python and shell scripting, with solid CI (GitLab) and container experience. Experienced automating at scale — job scheduling, artifact management, databases and dashboarding; curiosity about CPU performance is a plus, deep micr

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. Role Overview We seek an Mechatronics Engineer to join our new and non-defense consumer robotics program. The engineer in this role will develop mechanical systems end-to-end, from ideation through deployment, working with your peers to make technical and design decisions in the early stages of the product development. High level responsibilities include (but are not limited to): Make early technical and design decisions, from part selection through tradeoffs to ensure we can build and manufacture at scale Anticipate challenges in actuation, kinematics, sensor integration and embedded controls in order to help keep the team moving forward Contribute to test plans, technical documentation, and engineering reviews Validate design and iterate hardware based on performance feedback Build proof-of-concept designs, run experiments, and communicate findings Required Qualifications Foundational understanding of mechatronics, mechanism design, kinematics and dynamics Demonstrated hands-on turning ideas into hardware, bridging theory and practicality Experience taking ambiguous, open-ended problems and creating workable design with minimal oversight An intrinsic curiosity about hard problems and the motivation to learn unfamiliar systems Ability t

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role The Sr Embedded Software Engineer - Radar & DSP will play a key role in developing advanced RF sensing capabilities for Mach’s autonomous defense platforms. You will be responsible for designing, implementing, and optimizing radar software across the full development lifecycle; from algorithm prototyping to embedded deployment. This role involves close collaboration with cross-functional teams to ensure high-performance, low-latency radar systems that meet mission-critical requirements. Success in this role requires strong technical execution, adaptability, and a hands-on approach in a fast-paced, iterative environment. Key Responsibilities Develop, test, and implement radar software for RF sensing technologies ensuring high performance and reliability. Build next generation counter UAV systems through hands on application of radar defense systems to defend human lives, critical infrastructure, and high value assets for the United States and its allies Design and implement efficient, well-tested code in C++, Python or C. Work closely with other engineers to ensure seamless hardware-software integration. Develop and maintain signal processing algorithms tailored for RF sensing systems, ensuring real-time performance and low-latency

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role The RF Firmware Engineer will play a key role in developing advanced RF sensing capabilities for Mach’s autonomous defense platforms. Working on the DART team, you will focus directly on next-generation counter-UAV radar systems and RF seekers. You will be responsible for designing, implementing, verifying and optimizing the embedded firmware that controls the RF front-end of Mach’s RF seeker across the full development lifecycle - bare-metal board bring-up to final deployment. This role involves close collaboration with cross-functional teams that include antenna and RF hardware engineers to ensure the entire radar RF front-end system meets the mission-critical requirements. Success in this role requires strong technical execution, adaptability, and a hands-on approach in a fast-paced, iterative environment. Key Responsibilities Mission : Build next generation counter-UAV defense systems that will be used to defend human lives, critical infrastructure, and high value assets for the United States and its allies. Firmware development : Write high-performance, bare-metal C/C++ firmware for resource constrained microcontrollers powering the RF front-end boards in Mach’s radar products. Hardware co-design : Work with hardware engineers on component

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Industries is seeking a New Grad Software Engineer to join our team in developing the software that powers our autonomous defense systems. You will design, build, and optimize mission-critical software , working across real-time systems, embedded platforms, and autonomy applications. This role demands strong technical fundamentals, adaptability, and ownership , as you will work closely with engineers across software, GNC, embedded systems, and hardware to build and deploy high-performance systems in a fast-paced environment. Key Responsibilities Develop, test, and maintain software for autonomous defense platforms, with a focus on performance, reliability, and scalability. Design and implement clean, efficient, and well-tested code in C++, Rust, Python, or C. Develop software across the stack, from low-level embedded software and firmware to higher-level autonomy and mission applications. Work closely with GNC, embedded, systems, and hardware engineers to integrate software with complex electromechanical systems. Optimize software for real-time execution, low-latency performance, and resource-constrained embedded platforms. Build simulation, testing, and development infrastructure to accelerate software development a

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role The Software Engineer will play a critical role in developing our autonomous defense systems. You will be responsible for designing, building, and optimizing mission-critical applications, with a focus on real-time performance, reliability, and security. This role demands technical excellence, adaptability, and ownership, as you will work across the full software stack to develop and deploy high-performance systems in a fast-paced environment. Key Responsibilities Develop, test, and maintain software for autonomous defense platforms, ensuring high performance, reliability, and security. Design and implement efficient, well-tested code in C++, Rust, Python, or C to power real-time systems. Architect end-to-end software solutions, from low-level firmware to high-level mission software. Work closely with embedded engineers, GNC specialists, and systems engineers to ensure seamless hardware-software integration. Optimize software for real-time execution, ensuring low-latency operation on embedded platforms and edge computing systems. Implement secure coding practices, ensuring software is resilient to cyber threats and meets defense cybersecurity standards. Utilize&

About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Industries is building autonomous systems that must be thoroughly tested and validated in a multi layered process, long before they are flown. As a Senior Software Engineer, Infrastructure & Simulation, you will build the simulation and validation infrastructure that enables rapid iteration and high confidence in real-world performance. Your work will sit at the foundation of our autonomy stack, powering Monte Carlo, software-in-the-loop (SITL), hardware-in-the-loop (HITL) and large-scale simulations across Mach product lines. Key Responsibilities Design, build, and maintain simulation and validation infrastructure for aircraft systems, including discrete simulations of avionics, sensors, power distribution, flight controls, and embedded software. Develop and operate Software-in-the-Loop (SITL) and Hardware-in-the-Loop (HITL) frameworks to support rapid development, regression testing, and system validation across flight autonomy and embedded stacks. Build software infrastructure to emulate bare-metal drivers, avionics peripherals, and aircraft system behaviors, enabling early validation, fault injection, and failure-mode testing. Create and scale automated test pipelines that integrate simulation and HIL into CI/CD workflows to continu