Lead Electrical Boiler Turbine Generator in United States

Lead Electrical System Design & Analysis Engineer — USA - Tukwila, WA. Apply via Workday.

About us Graphcore is one of the world’s leading innovators in artificial intelligence compute. We are developing hardware, software and systems infrastructure that will unlock the next generation of AI breakthroughs and support the widespread adoption of AI solutions across every industry. As part of the SoftBank Group, Graphcore is a member of a family of companies responsible for some of the world’s most transformative technologies. Together, we share a bold vision to enable advanced artificial intelligence and ensure its benefits are accessible to everyone. Graphcore brings together AI researchers, silicon designers, software engineers and systems architects to solve complex technical challenges and deliver innovative computing solutions. Job Summary The Principal Electrical Engineer will be a technical authority within Data Center Engineering, leading the architecture and delivery of safe, resilient and scalable electrical infrastructure for high-density AI computing environments. Working with internal teams, data center developers, utilities, consultants and equipment partners, this role will guide projects from early technical studies through design, construction, commissioning, operation and lifecycle improvement. The successful candidate must reside in, or be willing to relocate to, Austin, Texas. Approximately 10% travel may be required. The Team The Data Center Engineering team is responsible for defining and enabling the infrastructure needed to deploy and operate Graphcore’s computing systems at scale. The team works across electrical, mechanical, thermal, controls, systems and operational disciplines, collaborating with external engineering and construction partners to deliver reliable, efficient and maintainable data center environments. Responsibilities and Duties Act as the technical authority for electrical engineering across data center infrastructure projects, from the utility or on-site power source through to the IT rack. Lead electrical archit

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Role The Electrical Commissioning Lead owns electrical commissioning planning, readiness, quality coordination, and test execution oversight for the project. This role ensures electrical systems are inspectable, testable, safe to energize, and ready for coordinated functional and integrated systems testing. Reports to the Commissioning Project Lead and partners closely with electrical contractors, equipment vendors, design/engineering teams, the mechanical commissioning lead, controls stakeholders, and vendor field/test engineers. Key Responsibilities Develop and maintain the electrical commissioning scope, readiness criteria, inspection strategy, and test execution plan. Review electrical design packages, specifications, submittals, method statements, sequence assumptions, and testing requirements for commissionability and risk. Coordinate electrical QA/QC inspections with contractors and vendor field/test engineers, including installation checks, pre-functional readiness, deficiency capture, and closeout tracking. Own electrical commissioning procedure development and review, including startup, energization readiness, functional testing, failure mode validation, controls interfaces, and integrated systems testing inputs. Coordinate with equipment vendors on factory/site acceptance requirements, startup support, test prerequisites, documentation packages, and vendor participation during critical tests. Support energization planning, switching and safety coordination, access sequencing, temporary conditions, witness points, and hold points. Lead discipline-level review of electrical test results, deficiencies, corrective actions, retest requirements, and acceptance evidence. Maintain electrical commissioning dashboards and status inputs for the Commissioning Project Lead, including risk items, resource needs, test readiness, and issue aging. Partner with the Mechanical Commissioning Lead on cross-discipline dependencies, including controls, life safety int

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer. Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardwar

About the Role The Mechanical Commissioning Project Engineer owns mechanical commissioning planning, readiness, quality coordination, and test execution oversight for the project. This role ensures mechanical systems are installed, inspected, started, balanced, controlled, and tested in a way that supports reliable integrated facility performance. Reports to the Commissioning Project Lead and partners closely with mechanical contractors, equipment vendors, design/engineering teams, the electrical commissioning lead, controls stakeholders, and vendor field/test engineers. Key Responsibilities Develop and maintain the mechanical commissioning scope, readiness criteria, inspection strategy, and discipline test execution plan. Review mechanical design packages, specifications, submittals, method statements, controls narratives, sequence assumptions, and testing requirements for commissionability and risk. Coordinate mechanical QA/QC inspections with contractors and vendor field/test engineers, including installation checks, pre-functional readiness, deficiency capture, and closeout tracking. Own mechanical commissioning procedure development and review, including equipment startup, functional testing, controls verification, balancing prerequisites, failure mode validation, and integrated systems testing inputs. Coordinate with equipment vendors on factory/site acceptance requirements, startup support, test prerequisites, documentation packages, and vendor participation during critical tests. Support readiness and execution for cooling, ventilation, hydronic, pumping, heat rejection, controls, and other project-specific mechanical systems. Lead discipline-level review of mechanical test results, deficiencies, corrective actions, retest requirements, trend logs, and acceptance evidence. Maintain mechanical commissioning dashboards and status inputs for the Commissioning Project Lead, including risk items, resource needs, test readiness, and issue aging. Partner with the E

Lead Design and Analysis Engineer (Electrical Systems Design) Company: The Boeing Company Boeing is currently hiring for a Lead Design and Analysis Engineer located in Berkeley, MO to be a part of the MQ-25 Electrical and Equipment Installation team. The MQ-25 Stingray is a new autonomous, unmanned carrier based refueling air vehicle. The selected candidate will be a part of aviation history by helping our Navy customer productization Autonomous Carrier landing, takeoff and refueling capabilities. The MQ-25 program is currently building the Engineering and Manufacturing Development (EMD) vehicles for the Navy. Additional work is under way for the beginning of the Low Rate Initial Production (LRIP) program for additional vehicles. The MQ-25 Electrical & Equipment team is responsible for the power architecture & design, electrical equipment technical management, electrical installation design, wire harness design, and integrating avionics and other equipment into the vehicle. This role will be focused on the power architecture & design. Position Responsibilities: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. This position is expected to be 100% onsite. The selected candidate will be require

Job Details: Job Description: In this role, you will lead cross-functional collaboration to advance circuit simulation and modeling capabilities for advanced foundry technologies. Your responsibilities will include: Vendor collaboration: Partnering with EDA vendors to enhance and validate industry-standard simulation tools and design flows. Technology alignment: Working closely with technology leaders, VLSI physical design teams, and PDK teams to ensure simulation and modeling capabilities are aligned with roadmap needs. PDK readiness: Driving readiness of high quality simulation and modeling solutions so they are available in time for PDK delivery. Qualifications: You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Minimum Qualifications: Bachelor’s degree in electrical engineering or computer engineering or related engineering discipline with 12&#43; years or master’s degree in electrical engineering or a related discipline and at least 10 years of industry experience in the semiconductor field; or Ph.D. in Electrical Engineering or a related discipline with a minimum of 8 years of industry experience in the semiconductor field. 5&#43; years supporting circuit simulation tools and working with circuit simulation vendors to develop solutions. 5&#43; years collaborating with EDA vendors on optimizing circuit simulation and modeling for advanced technology nodes. 3&#43; years of hands-on experience with BSIM or other compact models for transistor modeling at advanced nodes (e.g., FinFET, GAA).</

Lead Analyst Company: The Boeing Company Boeing F-22 Mission Systems team is hiring for a Lead Analyst located in Berkeley, MO . As Lead Analyst, you will be responsible for analyzing engineering solutions for the F-22 Raptor, including both enhancing existing field units with the addition of new capabilities as well as architecting and testing completely new systems. In this role you will be joining a cross-functional team to progress our products through the development lifecycle. Position Responsibilities: Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Must be able to work in a fast-paced, collaborative environment, engaging with multiple teams and being responsive to agile requirements and critical path customer need dates. Collaborates with Responsible Engineers, customer technical staff, suppliers, and Lockheed Martin teammates to develop and document complex electronic and electrical system requirements for F-22 avionics sub-systems and weapon system architecture Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications in support of lab and operational environments Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a US Secret Security Clearance for which the US Government requires US Citizenship A final Secret Clearance

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

Lead RF Systems and Defense Engineer- HP IQ Description - Who We Are HP IQ is HP’s new AI innovation lab. Combining startup agility with HP’s global scale, we’re building intelligent technologies that redefine how the world works, creates, and collaborates. We’re assembling a diverse, world-class team—engineers, designers, researchers, and product minds—focused on creating an intelligent ecosystem across HP’s portfolio. Together, we’re developing intuitive, adaptive solutions that spark creativity, boost productivity, and make collaboration seamless. We create breakthrough solutions that make complex tasks feel effortless, teamwork more natural, and ideas more impactful—always with a human-centric mindset. By embedding AI advancements into every HP product and service, we’re expanding what’s possible for individuals, organisations, and the future of work. Join us as we reinvent work, so people everywhere can do their best work. About The Role HP IQ's Wireless Technology Team works cross-functionally with Electrical Engineering, Software, Mechanical Engineering, Product Design, Industrial Design, Program Management, and Operations to develop next-generation wearable and AI-connected products. As a Lead RF Systems & Desense Engineer, you will own the RF system architecture from concept through mass production. You will lead RF integration across Wi-Fi, Bluetooth, UWB, NFC and emerging wireless technologies while driving RF desense, coexistence, and wireless performance for highly integrated products. <span style=

Lead Systems Integrator Company: The Boeing Company Boeing Defense, Space & Security (BDS) is seeking a Lead Systems Integrator (Level 4) to support an Air Dominance Fixed Wing Proprietary Program in St. Louis, MO . Step into a fast-paced, cutting-edge program where your expertise will drive the design, integration, and testing of advanced, cloud-based systems that empower mission planning, debrief, and tactical Command & Control (C2) solutions for fixed-wing platforms. In this role, you will lead the development, analysis, and integration of innovative engineering solutions for critical Ground System capabilities and ensure seamless support for ground systems from initial design through to final delivery. You will partner closely with the team’s test lead as well as the overall chief integrator who oversees all activities related to design, integration, and test. You will work with a high-performing, cross-functional team in an agile environment, driving next-generation capabilities from design through delivery. This role offers the chance to innovate with open-architecture, model-based designs and collaborate across disciplines to support critical defense missions. You champion best practices, processes, and standards for the integration team, mentor systems and electrical engineers, and coach solution leads on execution. If you’re passionate about advancing mission-critical systems and thrive in a collaborative, fast-moving environment, this is your opportunity to make a significant impact. Position Responsibilities Lead team of systems and electrical engineers in behavior modeling and requirements decomposition for system, sub-system, and software design

JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Lead Operating Engineer – JLL What this job involves: The Lead Operating Engineer supports the facility management team in delivering reliable building operations and exceptional client service. This position is responsible for maintaining building systems, responding to facility requests, coordinating repairs, and supporting preventive maintenance activities to ensure a safe, efficient, and well-maintained environment. The role requires strong technical knowledge, customer service skills, and the ability to work effectively in a fast-paced facilities management environment while contributing to JLL’s commitment to operational excellence and client satisfaction. What your day-to-day will look like: Respond to client inquiries, service requests, and facility-related concerns in a timely and professional manner. Perform preventive maintenance, troubleshooting, and repairs on building systems including HVAC, plumbing, electrical, fire protection, generators, and related equipment. Monitor building systems, record operational readings, and identify corrective actions for equipment malfunctions. Coordinate and communicate with vendors, subcontractors

Lead RF Engineer - Aperture Architect Company: The Boeing Company Boeing Defense, Space & Security is seeking a Lead RF Engineer – Aperture Architect to serve as the engineering lead for the antennas and apertures on a major air proprietary program. As the Lead RF Engineer – Aperture Architect, you will provide technical leadership and drive technical execution in the development of advanced RF antennas that balance performance across sensing, structural, and low observable requirements. You will be the technical lead for a team of engineers designing and integrating modern RF apertures and antennas. You will work with the IPT leader and IPT Chief Engineer to ensure the team produces a compliant system design. Position Responsibilities: Drives technical excellence throughout all aperture design activities Provides technical leadership and ensures use of best practices across programs Provides oversight and approval of technical approaches, products, and processes. Works closely with program managers, program chief engineers, and other Boeing teams to ensure mission success and prompt resolution of anomalies Provides mentoring and coaching to other aperture design engineers Captures lessons learned and best practices for implementation on future programs Resolves complex problems impacting completion of program milestones Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement <

About us Graphcore is one of the world’s leading innovators in Artificial Intelligence compute. It is developing hardware, software and systems infrastructure that will unlock the next generation of AI breakthroughs and power the widespread adoption of AI solutions across every industry. As part of the SoftBank Group, Graphcore is a member of a best-in-class family of companies responsible for some of the world’s most transformative technologies. Together, they share a bold vision: to enable Artificial Super Intelligence and ensure its benefits are accessible to everyone. Graphcore’s teams are drawn from a diverse group of backgrounds and bring a broad range of skills and perspectives. A melting pot of AI research specialists, silicon designers, software engineers and systems architects, Graphcore enjoys a culture of continuous learning and constant innovation. Job Summary We are seeking a senior validation lead engineer to lead at-scale rack validation efforts for next-generation AI hyperscale systems. This role focuses on post-silicon system validation across the full lifecycle, ensuring functional, electrical, and thermal performance meets product objectives. You will own end-to-end blade and rack validation including planning, development, execution, and debug while collaborating across firmware, systems, and hardware teams. The Team The Rack Validation team is responsible for ensuring system readiness and quality at scale. The team works cross-functionally with firmware, silicon, and system engineering teams to validate complex AI compute platforms. Responsibilities and Duties Lead post-silicon validation of AI compute blades and racks including test planning, development, and automation. Drive provisioning and integration of system components (SoC FW, BMC, RMC, OS) for rack-level readiness. Own execution against program achievements and report validation progress and risks. Triage test failures, collect debug data, and collaborate on root cause analysis. Track