Mechanical Building Engineer in United States

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Role The Electrical Commissioning Lead owns electrical commissioning planning, readiness, quality coordination, and test execution oversight for the project. This role ensures electrical systems are inspectable, testable, safe to energize, and ready for coordinated functional and integrated systems testing. Reports to the Commissioning Project Lead and partners closely with electrical contractors, equipment vendors, design/engineering teams, the mechanical commissioning lead, controls stakeholders, and vendor field/test engineers. Key Responsibilities Develop and maintain the electrical commissioning scope, readiness criteria, inspection strategy, and test execution plan. Review electrical design packages, specifications, submittals, method statements, sequence assumptions, and testing requirements for commissionability and risk. Coordinate electrical QA/QC inspections with contractors and vendor field/test engineers, including installation checks, pre-functional readiness, deficiency capture, and closeout tracking. Own electrical commissioning procedure development and review, including startup, energization readiness, functional testing, failure mode validation, controls interfaces, and integrated systems testing inputs. Coordinate with equipment vendors on factory/site acceptance requirements, startup support, test prerequisites, documentation packages, and vendor participation during critical tests. Support energization planning, switching and safety coordination, access sequencing, temporary conditions, witness points, and hold points. Lead discipline-level review of electrical test results, deficiencies, corrective actions, retest requirements, and acceptance evidence. Maintain electrical commissioning dashboards and status inputs for the Commissioning Project Lead, including risk items, resource needs, test readiness, and issue aging. Partner with the Mechanical Commissioning Lead on cross-discipline dependencies, including controls, life safety int

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve people's lives. About the Role We are seeking a lead thermal simulation engineer to help accelerate the design and development of next-generation robotic systems through modeling, simulation, and analysis. You will work closely with mechanical, electrical, controls, and robotics engineers to evaluate designs before hardware is built, identify risks early, and guide critical architecture decisions. This role spans structural and thermal analysis and design across robotic subsystems including actuators, mechanisms, structures, electronics, and integrated systems. You will develop simulation workflows that improve engineering velocity, increase confidence in design decisions, and help us build more capable, reliable, and manufacturable robotic platforms. This role is based in San Francisco, CA. This role will be expected to be in office 4 days per week and offer relocation assistance to new employees. In this role, you will: Perform thermal simulations to assess heat generation, cooling strategies, thermal interfaces, and system-level thermal performance Partner with mechanical, electrical, and controls engineers to influence design decisions early in development Build simulation models to evaluate robotic actuators, transmissions, mechanisms, structures, soft goods, and integrated assemblies Correlate simulation results with physical testing and develop methodologies to improve model accuracy Support architecture trade studies by evaluating design concepts before hardware is built Develop simulation workflows, standards, and best practices that scale across the robotics o

Job Title Field Service Engineer, Multimodality Imaging (Travel: Honolulu, HI) Job Description Allow your passion for improving lives to shine in this role where you’ll be responsible for customer relationship management through the effective use of technical knowledge to install, troubleshoot, service, and maintain equipment at customer sites. Considering candidates who are willing to relocate to Honolulu, HI. Your role: Provide exceptional customer service by adhering to customer entitlements, setting clear expectations, and meeting commitments and arrival times to address and resolve customer needs. Understand the customer's business and competitive environment; generate service revenue. Actively participate as a member of the regional work team; work to improve team processes and identify training gaps. Seek out opportunities to increase capability and capacity (i.e. may be required to become qualified in multiple modalities, learns new tools). Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, Field Change Orders (FCO), preventative maintenance (PM), installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements. Utilize tools, support, resources, and escalation processes within required time frames to resolve customer and system problems timely and effectively. Complete PMs, FCOs, installation and all related tasks (diagnose and resolve electronic, network, and mechanical problems). Approximately 70% travel across the specified geography is required. The average driving time is 1-4 hours daily. Occasional overnight stays and travel by air and/or train may be required. You're the right fit

JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. RME Operator - JLL What this job involves: At JLL, we are collectively shaping a brighter way for our clients, ourselves, and our fellow employees—and nowhere is that more evident than in our operations partnership with our client . As an RME Operator, you'll be at the heart of business operations, working behind the scenes to maintain the speed, accuracy, and exceptional service they're known for worldwide. In this role, you'll combine electronic, mechanical, computer, and automation engineering skills to keep complex high-performance manufacturing systems running smoothly. You'll work with cutting-edge robotics and material handling equipment that enables tens of thousands of products to reach hundreds of customers

JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. RME Operator - JLL What this job involves: At JLL, we are collectively shaping a brighter way for our clients, ourselves, and our fellow employees—and nowhere is that more evident than in our operations partnership with our client . As an RME Operator, you'll be at the heart of business operations, working behind the scenes to maintain the speed, accuracy, and exceptional service they're known for worldwide. In this role, you'll combine electronic, mechanical, computer, and automation engineering skills to keep complex high-performance manufacturing systems running smoothly. You'll work with cutting-edge robotics and material handling equipment that enables tens of thousands of products to reach hundreds of customers

Job Details: Job Description: As a Module Equipment Technician, you will play a vital role in ensuring the smooth operation of advanced manufacturing equipment used in semiconductor production. You will perform hands-on troubleshooting, maintenance, and calibration of electromechanical systems while supporting experiments and equipment modifications that drive cutting-edge advancements. Your work will directly contribute to enhancing equipment reliability and optimizing production efficiency, making an essential impact on Intel's manufacturing operations. Business Group Join Intel's Advanced Packaging Technology Development - Substrate and Wafer Assembly (ATPD: SWA) organization, a leader in delivering innovative and cost-effective substrate packaging solutions. This business group is focused on advancing Intel's capabilities in manufacturing technology to maintain competitive excellence across global markets. As part of this dynamic team, you will support critical equipment and collaborate on continuous improvement initiatives that align with Intel's broader mission of innovation and growth. Key Responsibilities Perform electrical and mechanical troubleshooting to diagnose issues with manufacturing equipment. Execute setup, calibration, corrective and preventative maintenance on production equipment, including wet chemistry, plating, and dry high-vacuum toolsets. Monitor tool performance and analyze data to identify and address equipment-related issues. Collaborate with engineering and support teams to improve equipment reliability and reduce downtime. Document maintenance activities, repair findings, and parts usage using established systems and procedures. Lead or contribute to continuous improvement projects, focusing on equipment optimization and yie

Radiation Environmental Test Engineer (Mid-Level or Senior) Company: The Boeing Company Boeing Missile & Weapons Systems is seeking a Radiation Environmental Test Engineer (Mid-Level or Senior) to lead radiation and environmental test efforts supporting ICBM modernization at the Little Mountain Test Facility in Hill Air Force Base, UT. This hands-on role combines test design, execution, data analysis, and facility/test-stand maintenance. The position supports ongoing modernization efforts to enhance current test capabilities and new developing capabilities—identifying, designing, managing, and integration of new test stands, diagnostics, and data systems to meet evolving mission requirements. Position Responsibilities: Lead and execute complex radiation and environmental test machine design and facility integration Identify interface requirements, CDRLs, configuration control documentation, and change orders Design, specify, and integrate test hardware, sub-assemblies, fixtures, and instrumentation Assist in configuring, validating, and operating data acquisition systems and custom software (LabVIEW) for diagnostics and event capture Support pulse power and flash X-ray systems: theory, operation, diagnostics, and data capture Perform technical evaluation of subcontractors Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 3: 5+ years of related work experience and a bachelor’s degree or an equivalent combination of related work

Training Device Technician (Training Device Maintenance) Company: Boeing Aerospace Operations Boeing Global Services (BGS) and the F-22 GTE Services Team are seeking a Mid-Level Training Device Technician (Maintenance) to support our team in Sheppard AFB, TX . This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the Sheppard AFB, Texas facility. Position Responsibilities: Provide F-22 training device maintenance services at Sheppard AFB, TX. Assists in repairs, tests, installs, configures, upgrades and assists in the modification of F-22 Maintenance Training Device (MTD) components, devices, hardware and software. Performs detailed inspections for pre-operations, post-operations and component handling. Inspect components and LRU's to verify status prior to installation. Consults with engineers in troubleshooting systems and support equipment. Troubleshoot to isolate mechanical or electrical faults and repair faulty components. Performs functional test of training device systems and monitors device instrumentation and indicators. Performs a multi-disciplined range of technical systems applications and activities. Installs, configures and maintains multi-platform systems hardware, software and components. Ensuring systems conform to architectural objectives. Evaluates complex system’s production readiness and supportability. Documents work by engineering planning documents and/or technical manuals. Excellent customer interface skills and communication skills, both oral and written, are required. Must be able to work independently, one-on-one, and in a team setting. Logisti

Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 3) to join our team in Huntington Beach or El Segundo, California. This position will be joining a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures Develops architectures to integrate systems and components into higher level systems and platforms Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements Defines and conducts tests to validate performance of designs to requirements Manages appropriate aspe

What if the work you did every day could impact the lives of people you know? Or all of humanity? At Illumina, we are expanding access to genomic technology to realize health equity for billions of people around the world. Our efforts enable life-changing discoveries that are transforming human health through the early detection and diagnosis of diseases and new treatment options for patients. Working at Illumina means being part of something bigger than yourself. Every person, in every role, has the opportunity to make a difference. Surrounded by extraordinary people, inspiring leaders, and world changing projects, you will do more and become more than you ever thought possible. This position maintains and repairs the facility's structure, equipment and ground, including plumbing, electrical and HVAC. Key Responsibilities: Responsible for mechanical service calls and in-house repairs throughout facility and grounds. Performs skilled trade work, such as carpentry or painting in the construction, repair or alteration of structures such as walls, roofs or office fixtures. Monitor, maintain document and perform preventative maintenance on HVAC system including central plant. May provide guidance and oversee other personnel. May work from sketches, blueprints, and drawings. Act as liaison and supervise work of contractors. Be on call and able to respond 7/24/365. Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs. Requirements: Requires 2-5 years of related experience Ability to continually learn through on-t

Job Title Remote Service Engineer, IGT-S (Remote-Based) Job Description Exciting opportunity combine your technical, networking, and customer interaction skills utilizing the latest remote access technologies to assist healthcare customers with IGT - Fixed Systems products. Your role: Acting as a Remote Service Engineer (RSE), the aim of your job is to provide telephone, remote technical support, and remote diagnostics to external healthcare customers and field partners, utilizing the latest remote access technologies. Acting as a Philips Representative in response to customer inquiries and providing telephone and remote technical support to external customers Resolving customer service events by leveraging Philips tools and resources as needed Timely escalation of customer product issues for evaluation and action by higher level support Utilization of appropriate remote tools to resolve issue and thus avoid dispatching of service call to Field Service Engineer Implementing best practices and process improvements while diagnosing problems, apply effective solutions and determine follow up actions Driving increased productivity through utilization of remote tools and technical skills Responds to customer product inquiries via telephone or in written internet-based email or chat sessions. Interpersonal skills and technical product knowledge and expertise are critical to responding to daily customer-centric activities. You're the right fit if: You’ve acquired 2+ years of experience in a diagnostic imaging (field or hospital-based) service environment. Philips Image Guided Therapy (IGT) System - Azurion and/or Alllura systems experience and training is required. Your skills include the ability to understand and apply electronic, mechanical

Job Title Field Service Engineer - CT/MRI (Field: Syracuse, NY) Job Description Allow your passion for improving lives to shine in this role where you’ll be responsible for customer relationship management through the effective use of technical knowledge to install, troubleshoot, service, and maintain equipment at customer sites. Your role: Provide exceptional customer service by adhering to customer entitlements, setting clear expectations, and meeting commitments and arrival times to address and resolve customer needs. Understand the customer's business and competitive environment; generate service revenue. Actively participate as a member of the regional work team; work to improve team processes and identify training gaps. Seek out opportunities to increase capability and capacity (i.e. may be required to become qualified in multiple modalities, learns new tools). Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, Field Change Orders (FCO), preventative maintenance (PM), installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements. Utilize tools, support, resources, and escalation processes within required time frames to resolve customer and system problems timely and effectively. Complete PMs, FCOs, installation and all related tasks (diagnose and resolve electronic, network, and mechanical problems). Approximately 70% travel across the specified geography is required. The average driving time is 1-4 hours daily. Occasional overnight stays and travel by air and/or train may be required. You're the right fit if: You’ve acquired 1+ years of experience in a diagnostic imaging (field or

Job Title Field Service Engineer - Imaging Systems (Field: Kansas City, KS/MO) Job Description Allow your passion for improving lives to shine in this role where you’ll be responsible for customer relationship management through the effective use of technical knowledge to install, troubleshoot, service, and maintain equipment at customer sites. Your role: Provide exceptional customer service by adhering to customer entitlements, setting clear expectations, and meeting commitments and arrival times to address and resolve customer needs. Understand the customer's business and competitive environment; generate service revenue. Actively participate as a member of the regional work team; work to improve team processes and identify training gaps. Seek out opportunities to increase capability and capacity (i.e. may be required to become qualified in multiple modalities, learns new tools). Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, Field Change Orders (FCO), preventative maintenance (PM), installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements. Utilize tools, support, resources, and escalation processes within required time frames to resolve customer and system problems timely and effectively. Complete PMs, FCOs, installation and all related tasks (diagnose and resolve electronic, network, and mechanical problems). Approximately 70% travel across the specified geography is required. The average driving time is 1-4 hours daily. Occasional overnight stays and travel by air and/or train may be required. You're the right fit if: You’ve acquired 1+ years of experience