Senior Hrbp Manager in United States

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design and prototype novel tactile, proprioceptive and force sensor solutions. You will work closely with experienced engineers and cross-functional partners to set functional requirements, develop and iterate on hardware to meet program expectations. This role is aimed at candidates with strong fundamentals in mechanical system design and robotic sensing including tactile sensors, force sensing and position sensing. You will contribute to real hardware programs moving from prototype through early production. You will lead both new sensor subsystem development and ongoing improvements to existing systems based on testing, field performance, and manufacturing feedback. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will Lead the design and iteration of mechanical subsystems, including tactile sensors, load cells, force torque sensors and joint encoders. Create and maintain CAD models, assemblies, and drawings with appropriate tolerancing and documentation. Build and test prototypes, supporting debugging of mechanical issues such as fit, alignment, friction, and wear. Assist in developing test methods and executing validation to evaluate performance, durability, calibration and failure modes. Work with cross-functional teams to integrate mechanical components with sensors, actuators, and control systems. Support transition of designs from prototype to manufacturable assemblies, incorporating DFM and DFA considerations. Collaborate with manufact

Principal Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is seeking a Principal Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 6) for a satellite development program in Huntington Beach or El Segundo, California. This position will lead a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Drives technical excellence throughout all Optical Sensor development activities Troubleshoots sensor design and integration issues with the telescope and sensor focal plane Provides technical leadership to SMS and BTI sensor teams Serves as the primary technical interface with the EO/IR suppliers Provides oversight and approval of technical approaches, products and processes. Works closely with program manager, program chief engineer, and other Boeing teams Ensure mission success and prompt resolution of anomalies Provides mentoring and coaching to Optical Sensor Engineers and Technicians Performs Technical Lead Engi

Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Experienced Electro-Optical Infrared Design, Assembly, Integration, and Test Engineer (Level 3) to join our team in Huntington Beach or El Segundo, California. This position will be joining a team of engineers, analysts and staff within the Space and Missile Systems (SMS) and Boeing Technology and Innovation (BTI) Mission Systems organizations in the development, assembly, integration, and test of a constellation of satellites. The SMS and BTI organizations develop and capture technology for designing disruptive Mission Systems solutions. Focused on visible and infrared spectrum Electro-Optics Infrared (EO/IR) sensors operating in Space and Air domains, our growing team is leaping ahead of our competition with an exceptional mix of mission architectures, sensor designs, and algorithms for advanced image and data processing. Position Responsibilities: Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures Develops architectures to integrate systems and components into higher level systems and platforms Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements Defines and conducts tests to validate performance of designs to requirements Manages appropriate aspe

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. About our Team: Micron’s Industrial and Physical AI team is driving the transformation of semiconductor manufacturing through Autonomous Operations, AI, robotics, and digital twin technologies! We develop and deploy innovative solutions across Micron’s global fabrication and assembly/test facilities, enabling smarter, safer, and more efficient operations at scale. Position Overview: We are seeking a hands-on Full-Stack AI Engineer to design, build, and deploy production-grade AI applications that support Micron's Autonomous Operations initiatives. This role owns the end-to-end development lifecycle, from data pipelines and AI models to APIs, web applications, digital twin integrations, and cloud/edge deployments, delivering impactful solutions for engineers, operators, and business leaders worldwide. Responsibilities: Design, architect, and deliver end-to-end AI products, including data ingestion pipelines, feature engineering, model training/inference, APIs, user interfaces, and application monitoring. Build and maintain modern front-end applications using React, Angular, or Streamlit, supported by backend services in Python and FastAPI. Develop scalable integrations between manufacturing systems, robotics platforms, AMRs, sensor networks, and enterprise applications to enable intelligent factory operations. Design and implement digital twin environments using platforms such as NVIDIA Omniverse, Gazebo, or Unity Robotics Hub to support simulation, validation, and o

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time. Company: Oak Street Health Title: Welcome Coordinator Location: 1113 Carlisle Rd, York, PA 17404 Role Description: Welcome Coordinators at Oak Street Health are the faces of our clinics, creating positive and lasting impressions on our patients and community members. They are the glue to our center operations, and help ensure a seamless, unmatched experience by performing high-touch tasks, such as scheduling, managing inbound and outbound phone calls, and performing daily administrative workflows, like mail and fax distribution. Oak Street Health provides care to older adults and seniors, with a mission to rebuild healthcare as it should be. Successful Welcome Coordinators help create a welcoming and inclusive environment for our patients, and exhibit high levels of flexibility, empathy, and compassion. They are responsible for delivering excellent administrative assistance to our patients and guests every day. Check out this pamphlet for a sneak peek into the life of an Oak Street Welcome Coordinator! Core Responsibilities: Welcoming patients and guests <l

Own the end-to-end execution that takes NVIDIA DRIVE Autonomous Driving Software (NDAS) from product definition to production deployment across major OEM vehicle lines. We are seeking an accomplished engineering execution leader to lead adaptation, integration, validation, and production readiness of NVIDIA Autonomous driving solution (NDAS) for strategic automotive OEMs. You will work between NVIDIA product and engineering teams and the OEM's vehicle, software, systems, and validation groups. The role involves converting an agreed feature set into a deliverable vehicle program. This entails clarifying requirements, coordinating interfaces and responsibilities, setting the engineering plan, building consistent productization workflows, and managing issue resolution. You will influence teams such as systems engineering, autonomous-driving development, platform software, functional safety, cybersecurity, quality, validation, release, and customer engineering. What You'll Be Doing: Lead NDAS execution with major OEMs across the full program lifecycle — from feature definition and technical alignment through vehicle integration, validation, launch, and production ramp — owning the coordinated engineering plan per vehicle line, including requirements, architecture, adaptation scope, achievements, staffing, validation strategy, release criteria, and production-readiness gates. Translate OEM vehicle requirements and use cases into clear commitments for NVIDIA teams, while ensuring OEM partners understand product capabilities, constraints, assumptions, and the work required on their side; build scalable, repeatable workflows for adapting NDAS to specific OEM platforms, vehicle architectures, sensor configurations, compute platforms, networks, and development processes. Drive multi-functional implementation across autonomous-driving features, systems, platform software, vehicle integratio

At Freddie Mac, our mission of Making Home Possible is what motivates us, and it’s at the core of everything we do. Since our charter in 1970, we have made home possible for more than 90 million families across the country. Join an organization where your work contributes to a greater purpose. We are accepting applications for this position until 10/16/2026 Position Overview: The Multifamily Division within Freddie Mac is searching for curious, motivated, and collaborative individuals to support the division's objectives, projects, and strategic initiatives. Freddie Mac Multifamily is a dynamic organization that provides interns with meaningful opportunities to gain exposure across the business while developing both technical and professional skills. As a Multifamily Business Intern, you will work on real-world projects, interact with professionals across the organization, and develop a deeper understanding of the Multifamily housing finance industry. This internship offers an opportunity to build business acumen, strengthen communication skills, and gain experience working in a mission-driven organization that supports housing affordability nationwide. Our Impact: Freddie Mac Multifamily helps deliver an ample supply of affordable rental housing by purchasing mortgages secured by apartment buildings with five or more units. We provide liquidity to the multifamily housing market by purchasing loans from lenders nationwide and securitizing them to support continued housing finance availability. Our financing supports communities across the country—from large metropolitan areas to smaller markets—and serves a diverse population of renters, including students, working families, seniors, and underserved communities. Your Impact: Engage with team members across the organization to develop a broad understandi

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

What you’ll do Be the generalist EE for the scanner system: integration, bring-up, debugging, and making the electrical side of the device reliable and serviceable. Own ultrasound experimentations that feeds the image reconstruction team Design and execute experiment setups for transducer characterization (element sensitivity, bandwidth, cross-talk mapping, beam profile measurements) and ex vivo / phantom clinical testing. Acquire, process, and analyze RF and baseband signals for data quality assessment and benchmarking. Design simple boards and adapters as needed (monitoring, power/safety, interface/conditioning), and take them from prototype through a stable revision. Prototype quickly, then harden what works: wiring/harnessing, grounding, safety interlocks, and reliable integration across subsystems. Own practical test setups and documentation (fixtures, scripts, procedures) that make experiments repeatable and results comparable over time. What we’re looking for Strong hands-on EE background with experience building, debugging, and iterating on real systems in the lab. Solid understanding of signal processing fundamentals — knows what to measure, how to condition and digitize it, and how to evaluate signal quality in the context of an imaging system (SNR, bandwidth, dynamic range, artifacts). Comfortable spanning system integration + occasional design work (schematics/layout reviews or light PCB design) in a fast-moving environment. Ability to work at the boundary between hardware and algorithms: measure reality, communicate constraints, and help close gaps vs simulation. High agency and practicality: able to set up experiments, get trustworthy data, and unblock others on a lean team. Useful experience Analog/mixed-signal, or high-speed data capture experience; strong instincts for instrumentation and noise/debugging. Ultrasound or acoustic sensor handling: hydrophone calibration and field mapping, transducer impedance characterization, element-level sensitivity

About the Team The Consumer Products team at OpenAI builds end-to-end hardware and software systems that bring AI into the physical world. We work at the intersection of custom silicon, embedded systems, operating systems, and cloud services to deliver reliable, production-ready devices at scale. Within Consumer Products, the camera stack is a critical sensing component. The team partners closely with electrical engineering, silicon vendors, systems, and higher-level perception and product teams to bring up new hardware, stabilize capture pipelines, and ensure camera systems are robust, debuggable, and ready for real-world deployment. This work spans early prototypes through production, with a strong emphasis on correctness, repeatability, and long-term reliability. About the Role As a Camera Firmware Engineer, you will own low-level camera enablement on custom hardware—from early board bring-up through stable production capture. You will develop and maintain the firmware and software that makes camera sensors reliable, controllable, and debuggable, forming the foundation for higher-level camera pipelines and product features. This role is highly hands-on and systems-oriented. You will work close to the hardware, diagnose real-world timing and integration issues, and build tooling that accelerates iteration across the entire camera stack. This role is based in San Francisco, CA. We follow a hybrid work model with four days per week in the office and offer relocation assistance to new employees. In This Role, You Will Bring up new camera sensors and modules on prototype and production boards, including link stability, sensor control, and correct power, reset, and clock sequencing. Develop and maintain low-level camera software, including sensor drivers, board configuration, and camera subsystem integration across hardware revisions. Enable and validate core capture paths for development and production, including RAW capture for debugging, still capture, and hardware-