Electrical Engineer in San Francisco

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking an Electrical Engineer to build and own the electrical backbone of our robotic actuator dynamometer and test infrastructure. You will design, integrate, and operate the load motor drives, power distribution, instrumentation wiring, DAQ interfaces, and safety systems that make high-performance robotic actuator testing repeatable, safe, and scalable. This role spans hands-on lab execution and system architecture: selecting and commissioning power electronics, designing robust test-cell electrical systems, bringing up sensors and DAQ, and partnering with mechanical and software engineers to turn robotic actuator hardware into trustworthy data. In this role, you will Own the electrical architecture of dynamometer and actuator test cells, from mains distribution and protection through load motor drives, braking, and auxiliary power. Specify, integrate, commission, and tune motor drives and load machines for robotic actuator torque, speed, efficiency, thermal, and durability testing. Design power distribution, grounding, shielding, cable routing, and connectorization for high-current, high-voltage, and low-level measurement systems. Integrate torque, position, speed, temperature, voltage, current, vibration, and other instrumentation from robotic actuators into DAQ and control systems. Develop electrical schematics, wiring diagrams, panel layouts, harness documentation, and test-cell interface definitions. Build, debug, and maintain test-cell electrical hardware, rapidly diagnosing noise, EMI, grounding, drive, sensor, and power-q

What you’ll do Be the generalist EE for the scanner system: integration, bring-up, debugging, and making the electrical side of the device reliable and serviceable. Own ultrasound experimentations that feeds the image reconstruction team Design and execute experiment setups for transducer characterization (element sensitivity, bandwidth, cross-talk mapping, beam profile measurements) and ex vivo / phantom clinical testing. Acquire, process, and analyze RF and baseband signals for data quality assessment and benchmarking. Design simple boards and adapters as needed (monitoring, power/safety, interface/conditioning), and take them from prototype through a stable revision. Prototype quickly, then harden what works: wiring/harnessing, grounding, safety interlocks, and reliable integration across subsystems. Own practical test setups and documentation (fixtures, scripts, procedures) that make experiments repeatable and results comparable over time. What we’re looking for Strong hands-on EE background with experience building, debugging, and iterating on real systems in the lab. Solid understanding of signal processing fundamentals — knows what to measure, how to condition and digitize it, and how to evaluate signal quality in the context of an imaging system (SNR, bandwidth, dynamic range, artifacts). Comfortable spanning system integration + occasional design work (schematics/layout reviews or light PCB design) in a fast-moving environment. Ability to work at the boundary between hardware and algorithms: measure reality, communicate constraints, and help close gaps vs simulation. High agency and practicality: able to set up experiments, get trustworthy data, and unblock others on a lean team. Useful experience Analog/mixed-signal, or high-speed data capture experience; strong instincts for instrumentation and noise/debugging. Ultrasound or acoustic sensor handling: hydrophone calibration and field mapping, transducer impedance characterization, element-level sensitivity

About the Team Our Robotics team is focused on unlocking general-purpose robotics and advancing toward AGI-level intelligence in dynamic, real-world environments. Working across the full model and systems stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the physical constraints of real-world systems to improve people’s lives. About the Role We're looking for an experienced Electrical Engineer to help develop the next generation of robotic systems at OpenAI. This role spans the full lifecycle of hardware development, from early concept exploration and prototyping through circuit design, component selection, PCB layout, bring-up, integration, and deployment. Engineers in this role are expected to independently drive significant hardware efforts from initial concept through deployment. You will translate ambiguous goals into concrete engineering plans, make key technical decisions, coordinate closely with cross-functional partners, and own execution through the iterations required to deliver a successful system. Many of the systems we build are still being defined. You will work closely with mechanical, firmware, software, controls, and research teams to evaluate new ideas, develop novel hardware, and integrate it into robotic platforms. Success in this role requires strong engineering judgment, comfort operating in ambiguous spaces, and the ability to balance rapid experimentation with the discipline required to build reliable and scalable systems. The ideal candidate enjoys building things from first principles and is equally comfortable evaluating a new technology, debugging a prototype on the bench, reviewing PCB layout details, and driving system integration efforts. You should be able to move quickly when appropriate, but also know when investing in robustness, simplicity, or infrastructure will create leverage for future development. This role is

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

About the Team OpenAI is building the infrastructure foundation for the next generation of AI. The Data Center Engineering team defines the strategy, reference architectures, technical requirements, and delivery standards for the large-scale data centers that support OpenAI research, products, and infrastructure partners. As a Data Center Infrastructure Electrical Engineer, you will help define, validate, and scale the electrical power systems that support high-density AI compute. You will translate evolving compute requirements into practical facility and rack-power architectures, evaluate new technologies and vendor solutions, and drive technical decisions across design, manufacturing validation, construction, commissioning, deployment, and operations. This role is best suited for a senior hands-on engineer with deep experience in mission-critical power systems, strong judgment under ambiguity, and the ability to connect facility infrastructure, hardware requirements, controls, telemetry, reliability, and operations. About the Role We are seeking a senior electrical infrastructure engineer to lead the development of reliable, scalable, and efficient power architectures for high-density, liquid-cooled AI data centers. The ideal candidate has strong practical experience with critical electrical systems at data centers or comparable industrial scale, including medium-voltage and low-voltage distribution, utility interfaces, backup power, UPS and battery systems, rack power delivery, grounding, protection, controls, and monitoring systems. You should be comfortable moving between long-range architecture, detailed engineering review, lab validation, vendor qualification, field deployment, and operational troubleshooting. Key Responsibilities Design and optimize electrical topologies and equipment strategies that reduce cost, accelerate schedules, improve efficiency, increase scalability, and maintain high reliability and maintainability. Review and develop basis-of-des

About the Team The Consumer Devices team at OpenAI builds end-to-end hardware and software systems that bring AI into the physical world. We work at the intersection of custom silicon, embedded systems, operating systems, cloud services, mechanical engineering, electrical engineering, and product design to deliver reliable, production-ready devices at scale. Within Consumer Devices, Hardware Engineering eXperience, or HEX, is a new bootstrapped team building the environments, applications, compute, product-data systems, and workflows that let hardware engineers do their work without needing to troubleshoot the machinery underneath. HEX owns virtual engineering environments, HPC/GPU compute, storage, networking, licensing, MCAD/ECAD/CAE applications, PLM, product data, automation, validation, and support as one connected system. About the Role As a Staff PLM & Engineering Applications Engineer, you will be one of the first technical builders of HEX and the primary counterpart to the HEX lead. You will own the engineering-application and product-data side of the hardware engineering experience, with an initial focus on NX, Teamcenter, licensing, parts import, integrations, packaging, validation, and user workflows. This is not a traditional Teamcenter administration role and not a Corporate IT application-support role. You will take complex, fragile workflows and turn them into reliable engineering systems. This role is highly hands-on and systems-oriented. You will not inherit a mature environment and support queue. You will help build a fresh one, replacing manual setup guides, tribal knowledge, repeated support issues, and team handoffs with tested automation and reliable workflows. In This Role, You Will Own the technical architecture, deployment, configuration, integration, validation, and long-term operation of NX and Teamcenter. Build reliable workflows for parts import, product-data migration, metadata quality, BOMs, revisions, lifecycle states, and releas

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a Mechanical Engineer to design, build, and own the mechanical side of our robotic actuator dynamometer and test infrastructure. You will create the test stands, couplings, fixtures, load paths, guarding, and serviceable lab hardware that enable rigorous characterization of robotic actuators. This role combines precision mechanical design with hands-on lab work. You will take robotic actuator test infrastructure from requirements and analysis through CAD, fabrication, assembly, commissioning, and iteration, partnering closely with electrical and software engineers to deliver safe, flexible, high-uptime test cells. In this role, you will Own the mechanical architecture of dynamometer and actuator test cells, including frames, bases, load paths, alignment, guarding, and serviceability. Design dynamometer structures, robotic actuator fixtures, load-motor mounts, couplings, shafts, bearings, adapters, and torque-reaction hardware. Translate robotic actuator test requirements into robust mechanical systems for torque, speed, thermal, durability, backdrive, efficiency, and failure testing. Perform first-principles analysis and simulation for stiffness, strength, fatigue, vibration, thermal growth, critical speed, and safety factors. Create precise, repeatable alignment strategies that protect test articles, load machines, sensors, and couplings. Design modular fixturing that supports rapid changeover across actuator and motor variants without compromising measurement quality. Work closely with electrical engineers on cable routing

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We are seeking a senior Actuator Electromagnetic Design Engineer to lead the development of custom electromechanical actuators for advanced robotic systems. You will own actuator development from early architecture and concept generation through prototype validation and system integration, partnering closely with mechanical, electrical, controls, firmware, reliability, and manufacturing teams. This role focuses on the design, integration, and validation of precision electromechanical systems, including motors, transmissions, sensing, structural components, and thermal architectures. You will help drive actuator development across the full engineering lifecycle while establishing scalable design, test, and integration practices for future robotic platforms. This role is based in San Francisco, CA, and requires in-person presence 4 days a week. In this role, you will: Lead the architecture, design, and integration of custom robotic actuators, including the design, simulation, integration and sourcing of custom electromagnetic components. Define actuator requirements and system-level trade studies around torque density, bandwidth, efficiency, thermal performance, inertia, reliability, manufacturability, and cost. Design precision electromechanical assemblies with strong attention to tolerances, alignment, load paths, thermal expansion, sealing, wear, and serviceability. Drive actuator integration into robotic systems, partnering closely with controls, firmware, electrical, and robotics software teams to optimize closed-loop performance. Devel

About the Team OpenAI's mission is to ensure that artificial general intelligence benefits all of humanity. The Consumer Devices team is building a new generation of AI-powered products that seamlessly integrate hardware and software to create intuitive, transformative experiences. We bring together experts across embedded systems, machine learning, hardware, design, and product engineering to develop products at the intersection of AI and consumer technology. About the Role OpenAI is seeking a System Power Engineer to characterize, measure, and optimize power consumption across our embedded hardware products. In this role, you will work closely with Electrical Engineering and system software teams to build power test automation, measure subsystem-level power usage, and drive improvements that directly impact battery life, thermal behavior, charging performance, and system reliability. You will help establish the methodologies and metrics used to understand and improve power efficiency across real-world product experiences, from controlled lab environments to representative day-in-the-life usage scenarios. This role requires hands-on experience with embedded hardware platforms, power instrumentation, and the analysis of power profiles and system behavior. This role is based in San Francisco, CA. We use a hybrid work model of four days per week in the office and one day working remotely. Relocation assistance is available for new hires. In this role, you will: Define and develop power testing automation to evaluate system behavior across a range of workloads and operating conditions. Measure subsystem-level power consumption using power breakout probes and other lab instrumentation. Develop and execute power characterization tests spanning basic workloads, complex mixed-use scenarios, and representative day-of-use experiences. Partner closely with Electrical Engineers to identify opportunities to improve system power efficiency. Collaborate with software engineering

About the Team OpenAI is building the infrastructure foundation for the next generation of AI. The Data Center Engineering team defines the strategy, reference architectures, technical requirements, and delivery standards for the large-scale data centers that support OpenAI research, products, and infrastructure partners. As a Data Center Controls Network Engineer, you will design, validate, and scale the controls and OT network architectures that support high-density AI data centers. You will work across controls systems, OT infrastructure, telemetry, commissioning, deployment, and operations, partnering with mechanical, electrical, IT/networking, security, and external delivery teams. About the Role We are seeking a mid to senior OT Network Engineer with a strong controls systems background to lead the design and operation of resilient, secure, and scalable OT network architectures for high-density AI data centers. This role translates compute, power, cooling, and operational requirements into practical OT network designs, evaluates vendor solutions, and drives technical decisions across controls infrastructure, telemetry, commissioning, and operations. The ideal candidate has strong hands-on experience in mission-critical OT environments, including industrial networking, virtualized infrastructure, and OT network operations, with expertise in routing, switching, segmentation, firewall policy, time synchronization, monitoring, and network lifecycle support. Key Responsibilities Define controls, automation, and OT network requirements for AI data center campuses. Develop reference architectures, engineering standards, and reusable design templates. Review and develop basis-of-design and functional design documents, including OT network diagrams, IP/VLAN schemes, telemetry architectures, data flow diagrams, and commissioning requirements. Design OT and infrastructure network architectures, including physical topology, logical topology, IP addressing, subnetting, VLA

About the Team The Consumer Products team at OpenAI builds end-to-end hardware and software systems that bring AI into the physical world. We work at the intersection of custom silicon, embedded systems, operating systems, and cloud services to deliver reliable, production-ready devices at scale. Within Consumer Products, the camera stack is a critical sensing component. The team partners closely with electrical engineering, silicon vendors, systems, and higher-level perception and product teams to bring up new hardware, stabilize capture pipelines, and ensure camera systems are robust, debuggable, and ready for real-world deployment. This work spans early prototypes through production, with a strong emphasis on correctness, repeatability, and long-term reliability. About the Role As a Camera Firmware Engineer, you will own low-level camera enablement on custom hardware—from early board bring-up through stable production capture. You will develop and maintain the firmware and software that makes camera sensors reliable, controllable, and debuggable, forming the foundation for higher-level camera pipelines and product features. This role is highly hands-on and systems-oriented. You will work close to the hardware, diagnose real-world timing and integration issues, and build tooling that accelerates iteration across the entire camera stack. This role is based in San Francisco, CA. We follow a hybrid work model with four days per week in the office and offer relocation assistance to new employees. In This Role, You Will Bring up new camera sensors and modules on prototype and production boards, including link stability, sensor control, and correct power, reset, and clock sequencing. Develop and maintain low-level camera software, including sensor drivers, board configuration, and camera subsystem integration across hardware revisions. Enable and validate core capture paths for development and production, including RAW capture for debugging, still capture, and hardware-

About the Team Our Robotics team is focused on unlocking general-purpose robotics and pushing towards AGI-level intelligence in dynamic, real-world settings. Working across the entire model stack, we integrate cutting-edge hardware and software to explore a broad range of robotic form factors. We strive to seamlessly blend high-level AI capabilities with the constraints of physical systems to improve peoples’ lives. About the Role We're seeking talented Robotics Software Engineers to expand our robotics data collection and evaluation program. This highly technical role involves designing, implementing, and optimizing software solutions across diverse robotics hardware. You'll work closely and collaboratively with multidisciplinary teams; including software, hardware, research, and operations - to drive advancements in our robotic systems. This role is based in San Francisco, CA, and requires in-person 4 days a week. In this role, you will: Help develop and grow our data collection labs, owning the entire integration lifecycle, from identifying and sourcing new hardware to collaborating with mechanical and electrical engineers on setup, software integration, and operational deployment. Develop innovative robot control interfaces suited to a variety of morphologies, environments, and tasks. Collaborate closely with research and engineering teams to develop automation tools and machinery that facilitate the evaluation of advanced robotic policies. Lead the design and implementation of data collection, visualization, and quality control processes. You might thrive in this role if you: Have 5+ years of professional software engineering experience developing and shipping production-quality systems in robotics or hardware-integrated environments. Have extensive experience integrating and deploying industrial automation systems, off-the-shelf robotics platforms, or custom hardware into production environments. Bring hands-on experience delivering production-quality software

About the Team OpenAI’s Industrial Compute team is building and productizing infrastructure capabilities that help organizations deploy and operate advanced AI systems at scale. The team works across AI hardware, systems engineering, physical infrastructure, and customer delivery to turn emerging technologies into reliable, repeatable infrastructure solutions. Our work sits at the intersection of technical strategy, product development, engineering, and deployment. We partner closely with customers and internal engineering teams to solve complex infrastructure challenges spanning compute, power, cooling, controls, and facility efficiency. About the Role We are seeking a senior, hands-on Data Center Infrastructure Architect to develop and optimize the physical infrastructure required for large-scale AI deployments. This is a broad technical role spanning data center architecture, electrical and mechanical systems, high-density compute, controls, telemetry, and digital modeling. You will use simulation, operational data, and digital-twin approaches to evaluate infrastructure designs, identify system-level constraints, and improve efficiency, reliability, cost, and speed of deployment. The ideal candidate can move fluidly between first-principles analysis, facility and equipment design, computational modeling, engineering review, and real-world implementation. You should be comfortable working across disciplines rather than operating solely within electrical, mechanical, or software boundaries. Key Responsibilities Define system-level architectures for high-density AI data centers across power, cooling, IT equipment, controls, and facility infrastructure. Develop digital twins and other computational models that represent the behavior of data center systems under changing workloads, environmental conditions, equipment configurations, and failure scenarios. Use design and operational data to identify constraints, improve PUE and related efficiency metrics, and optimize

About the Team OpenAI’s Hardware organization develops silicon and system-level solutions designed for the unique demands of advanced AI workloads. The team builds next-generation AI-native silicon and systems while working closely with software, research, and manufacturing partners to co-design hardware tightly integrated with AI models. In addition to delivering systems for OpenAI’s supercomputing infrastructure, the team develops the tools, methodologies, and strategic partnerships needed to accelerate hardware innovation. About the Role We’re seeking an experienced Hardware Strategic Sourcing Manager to own sourcing strategy and supplier partnerships for fiber and optical interconnect components across OpenAI’s next-generation AI infrastructure. Reporting to the Head of Partnerships & Strategic Sourcing, you will lead sourcing across fiber cable assemblies, internal optical harnesses, fiber shuffles, optical backplane assemblies, connectorized and standalone passive optical assemblies, fiber-array units (FAUs), fiber-to-chip and coupling interfaces, detachable connectors, optical routing, and assigned optical packaging, assembly, and test services. You will work closely with electrical engineering, optical engineering, systems engineering, mechanical and packaging engineering, quality, rack integration, data-center deployment,manufacturing, supply chain, finance, legal, and program management teams to translate demanding bandwidth, signal integrity, reliability, and scale requirements into resilient supplier partnerships and scalable commercial strategies. Your work will directly support the performance, reliability, manufacturability, and scale of the high-speed optical connectivity required for OpenAI’s next-generation AI systems. In this role, you will: Develop and execute a comprehensive sourcing strategy for fiber and optical interconnect components supporting high-bandwidth AI systems and infrastructure. Own sourcing across optical fiber cable assembli

About the Team Industrial Compute is building the world's most advanced AI infrastructure. Working alongside our capital partners, engineering teams, and construction organizations, we design and deliver large-scale, mission-critical compute campuses that power the next generation of AI. Our Design organization brings together engineering, construction, and digital design to ensure facilities are coordinated, constructible, and optimized from the earliest planning phases through deployment. About the Role We are seeking a BIM Designer & Coordinator to support the planning and design of large-scale industrial and mission-critical facilities. In this role, you will develop, coordinate, and maintain multidisciplinary BIM models across Civil, Electrical, Mechanical, Architectural, and Structural disciplines, enabling early design validation, constructability reviews, equipment planning, and cross-functional coordination. You will partner closely with internal engineering teams, external design consultants, contractors, and project stakeholders to produce coordinated BIM deliverables that improve design quality, reduce project risk, and support efficient execution across Industrial Compute's global infrastructure portfolio. Key Responsibilities: Develop and maintain conceptual and schematic BIM models for large-scale industrial and MEP-intensive facilities. Coordinate BIM models across Civil, Electrical, Mechanical, Architectural, and Structural disciplines. Create and maintain federated models used for design reviews, spatial coordination, constructability analysis, and clash detection. Model major building systems including equipment layouts, utility corridors, electrical rooms, mechanical rooms, structural framing, site infrastructure, and architectural constraints. Coordinate equipment clearances, maintenance access, routing zones, shafts, risers, utility entrances, and major MEP pathways. Translate engineering sketches, basis-of-design documents, equipment lists