Electrical in United States

Lead Electrical System Design & Analysis Engineer — USA - Tukwila, WA. Apply via Workday.

What you’ll do Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control). Mentor and grow the electrical function; select and manage external design partners where leverage is high. What we’re looking for Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains. Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts. Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware. Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces. Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis. Technical leadership: clear trade-offs, strong written documentation, and the ability to set

Entry-Level Electrical / Wire Harness Assembly Technician Company: Boeing is currently seeking Entry-Level Electrical / Wire Harness Assembly Technicians in Mesa, AZ . Fabricate, assemble, modify, repair, test development, production and prototype wire harnesses and electrical assemblies. Utilize the Boeing Quality management system to identify and document nonconforming detail parts, assemblies and processes. Work with support teams including engineering, material management, and quality to improve manufacturing processes. Fabricate, assemble, modify, repair, test development, production and prototype wire harnesses and electrical assemblies. Construct wire harnesses and panels by cutting, sorting, color-coding, measuring, stripping, crimping, soldering, routing, and inspecting various lengths, types, and gauges of wire, heat-shrink, and other related materials including use of ruler, scale, and other measurement devices to interpret lengths. Operate tools and equipment such as wire strippers, crimpers, solder iron, wire identification and cutting machines, heat guns, and associated tools. Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformance issues. Complete and maintain all required training and certifications needed to do your job efficiently. Maintain safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Knowledgeable and able to interpret blueprints, sketches, specifications and written or verbal instructions. Knowledgeable and skilled in electrical (wire harness) materials, fabrication and assembly methods and common shop practices. Knowledgeable and able to apply basic mathematics. Tr

Test & Evaluation Lab Tech (Electrical/Electronic Equipment) Company: The Boeing Company The Boeing Company has an exciting opportunity for Test & Evaluation Lab Tech to join Boeing Defense, Space & Security (BDS) in Berkeley, MO. As a Boeing employee you’ll be part of a winning team that does great things every day BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: • Installing and maintaining Flight Simulation equipment consisting of computers, monitors, audio systems, visual systems, crew stations and rack equipment • Troubleshoot and resolve electronic hardware issues with minimum down time • Plans, conducts and documents tests on products, systems, components, materials, and manufacturing processes and technologies • Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies • Coordinates test requirements, determines test methods and capabilities • Conducts system test preparations by coordinating system integration, fabrication, modification, setup, checkout and tear-down • Troubleshoots and resolves laboratory and test-related problems • Coordinates test laboratory activities and maintenance and repairs • Coaches and trains others • Works under general direction </

Test & Evaluation Lab Tech (Electrical/Electronic Equipment) Company: The Boeing Company Job Description The Boeing Company has an exciting opportunity for Test & Evaluation Lab Tech to join Boeing Defense, Space & Security (BDS) in Berkeley, MO. As a Boeing employee you’ll be part of a winning team that does great things every day BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: • Installing and maintaining Flight Simulation equipment consisting of computers, monitors, audio systems, visual systems, crew stations and rack equipment • Troubleshoot and resolve electronic hardware issues with minimum down time • Plans, conducts and documents tests on products, systems, components, materials, and manufacturing processes and technologies • Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies <span style

We anticipate the application window for this opening will close on - 28 Sep 2026 Careers that change lives start here. Medtronic is a global leader in healthcare technology with a Mission to alleviate pain, restore health, and extend life. Our 95,000 employees work across more than 150 countries to put patients first — developing innovative medical technologies that improve the lives of 72&#43; million patients each year. Your unique talents will help shape the future of healthcare while building a career grounded in purpose, growth, and impact. A Day in the Life At Medtronic, we bring bold ideas forward with speed and decisiveness to put patients first in everything we do. In-person exchanges are invaluable to our work. We’re working a minimum of 5 days a week onsite as part of our commitment to fostering a culture of professional growth and cross-functional collaboration as we work together to engineer the extraordinary. The Cardiac Rhythm Management (CRM) portfolio delivers therapies designed to restore, support, and protect every heartbeat through advanced pacing, defibrillation, and remote monitoring solutions. CRM's unique ability to pair proven life-saving therapies with intelligent technology gives clinicians and patients greater confidence. Clinical impact and innovation come together to improve lives through meaningful patient outcomes. The Senior Principal Electrical Engineer is a key individual contributor within the Medtronic Cardiac Rhythm Management (CRM) Electrical System Design Team. In this role, you will drive the definition, design, integration, and verification of complex mixed-signal electronics for active implantable cardiac devices and external patient systems

Receiving Quality Inspector Senior – Electrical (First Shift) - Millennium Space Systems — USA - El Segundo, CA. Apply via Workday.

Wire Design & Install Engr (Electrical/Electronic Installation Design) — USA - Hazelwood, MO. Apply via Workday.

About the Team OpenAI is building the infrastructure foundation for the next generation of AI. The Data Center Engineering team defines the strategy, reference architectures, technical requirements, and delivery standards for the large-scale data centers that support OpenAI research, products, and infrastructure partners. As a Data Center Infrastructure Electrical Engineer, you will help define, validate, and scale the electrical power systems that support high-density AI compute. You will translate evolving compute requirements into practical facility and rack-power architectures, evaluate new technologies and vendor solutions, and drive technical decisions across design, manufacturing validation, construction, commissioning, deployment, and operations. This role is best suited for a senior hands-on engineer with deep experience in mission-critical power systems, strong judgment under ambiguity, and the ability to connect facility infrastructure, hardware requirements, controls, telemetry, reliability, and operations. About the Role We are seeking a senior electrical infrastructure engineer to lead the development of reliable, scalable, and efficient power architectures for high-density, liquid-cooled AI data centers. The ideal candidate has strong practical experience with critical electrical systems at data centers or comparable industrial scale, including medium-voltage and low-voltage distribution, utility interfaces, backup power, UPS and battery systems, rack power delivery, grounding, protection, controls, and monitoring systems. You should be comfortable moving between long-range architecture, detailed engineering review, lab validation, vendor qualification, field deployment, and operational troubleshooting. Key Responsibilities Design and optimize electrical topologies and equipment strategies that reduce cost, accelerate schedules, improve efficiency, increase scalability, and maintain high reliability and maintainability. Review and develop basis-of-des

Lead Design and Analysis Engineer (Electrical Systems Design) Company: The Boeing Company Boeing is currently hiring for a Lead Design and Analysis Engineer located in Berkeley, MO to be a part of the MQ-25 Electrical and Equipment Installation team. The MQ-25 Stingray is a new autonomous, unmanned carrier based refueling air vehicle. The selected candidate will be a part of aviation history by helping our Navy customer productization Autonomous Carrier landing, takeoff and refueling capabilities. The MQ-25 program is currently building the Engineering and Manufacturing Development (EMD) vehicles for the Navy. Additional work is under way for the beginning of the Low Rate Initial Production (LRIP) program for additional vehicles. The MQ-25 Electrical & Equipment team is responsible for the power architecture & design, electrical equipment technical management, electrical installation design, wire harness design, and integrating avionics and other equipment into the vehicle. This role will be focused on the power architecture & design. Position Responsibilities: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. This position is expected to be 100% onsite. The selected candidate will be require

Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company’s primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer. Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardwar

About the Team OpenAI, in close collaboration with our capital partners, is embarking on a journey to build the world’s most advanced AI infrastructure ecosystem. This team is central to this mission, setting the core infra strategy and implementing this vision. From site selection to the buildout process, this team sits at the intersection of commercial, technical, strategy, and operations, interacting with teams and executives inside and outside of OpenAI. About the Role We are seeking experienced Data Center Mechanical and Electrical/Power Design Engineers with expertise in designing, operating, and maintaining large-scale data center campuses. The ideal candidate for this role will have extensive background and experience in design and managing critical equipment and facilities, design and operation of MEP (Mechanical, Electrical, Plumbing) systems, and overseeing operational activities from initial phases of Data Center build through delivery and ongoing maintenance. The ideal candidate will have a strong technical background, operational leadership experience, and a proven ability to collaborate with external vendors on critical infrastructure. This role offers the opportunity to lead transformative data center projects with high visibility and impact. If you are passionate about delivering cutting-edge infrastructure solutions, we encourage you to apply. Key Responsibilities Oversee building and MEP design, operation, and maintenance, including reviewing building and MEP drawings and proposals across all project phases. Lead operational activities for large-scale data center campuses, from early design phases through delivery and daily operation. Operate and maintain critical data center facilities and equipment, ensuring reliability and performance. Collaborate with external vendors to select, procure, and manage critical equipment, such as generators, UPS, chillers, and CDUs. Provide technical expertise on all aspects of data center building, equipment, and

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Department Introduction The Systems Integration Group (SIG) develops advanced test solutions that support semiconductor manufacturing and product quality. The team partners across engineering, operations, procurement, and external suppliers to design, build, and deploy innovative hardware platforms that enable reliable testing and validation of semiconductor devices. Join the team building semiconductor memory test platforms for tomorrow’s AI infrastructure. Position Overview As an Electrical Design Engineer, you will design and develop electronic hardware used in advanced semiconductor test systems. You will apply electrical engineering principles to create analog, digital, and mixed-signal solutions that support manufacturing and product development. This role spans the full hardware development lifecycle, from concept and design through validation, deployment, and sustaining support. You will collaborate with cross-functional teams around the world to deliver reliable, high-quality test solutions. Responsibilities Design analog, digital, and mixed-signal electronic circuits from concept through implementation and validation Evaluate and select electronic components to meet system performance, reliability, and cost objectives Develop schematics and collaborate with PCB designers to create optimized board layouts Perform circuit simulation, analysis, and design verification using industry-standard tools Debug, test, and val

About the Team OpenAI's Industrial Compute organization is building the world's most advanced AI infrastructure ecosystem. Working alongside leading cloud providers, engineering firms, construction partners, utilities, and equipment manufacturers, we are delivering hyperscale AI campuses that enable the next generation of frontier AI models. The Strategic Sourcing team develops and executes the commercial strategies that ensure our infrastructure programs have reliable access to the equipment, materials, and strategic partners needed to deliver at unprecedented scale. We partner closely with Infrastructure Delivery, Capacity Planning, Design Engineering, Hardware Operations, Finance, Legal, and our external suppliers to build a resilient global supply network capable of supporting Industrial Compute's long-term growth. As we continue expanding globally, strategic sourcing becomes a critical competitive advantage, ensuring our infrastructure programs remain cost-effective, resilient, and capable of executing against aggressive deployment timelines. About the Role We are seeking a Strategic Sourcing Manager, Data Center Infrastructure to lead sourcing strategy for the critical infrastructure systems that power Industrial Compute campuses. This role will develop commercial strategies, negotiate strategic supplier agreements, and manage relationships across engineering, construction, manufacturing, and infrastructure partners responsible for delivering mission-critical facilities. You will work closely with Infrastructure Delivery, Capacity Planning, Engineering, Finance, Construction, and external suppliers to ensure Industrial Compute has the capacity, supplier relationships, and commercial frameworks required to support rapid global expansion. The ideal candidate has experience sourcing major infrastructure systems for hyperscale data centers, mission-critical facilities, industrial construction, semiconductor manufacturing, energy infrastructure, or similarly comple

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 122,000 colleagues serve people in more than 160 countries. JOB DESCRIPTION: The Opportunity The Maintenance Technician IV is responsible for operating, maintaining, troubleshooting, and repairing facility related mechanical, electrical, instrumentation, refrigeration, control systems, and equipment located within office, R&D, and GMP manufacturing locations. Additionally, this position supports automated fill, cap, and labeling, conveying, and product finishing equipment from set-up, to change-over and supports associated maintenance and troubleshooting as requested. Shift: 8:00 p.m. – 8:30 a.m., Saturday through Monday (three 12-hour overnight shifts per week). What You’ll Work On Include but are not limited to the following: Communicate facility and safety related issues that arise from daily operations to the Facilities Management to coordinate with internal customers, property owner and/or outside vendors. Own the process in managing spare parts for facility utilities and supplies as needed to minimize equipment downtime. Oversee the facility and utility systems including but not limited to electrical distribution, plumbing, HVAC, compressed air systems, fire and life safety systems and emergency power. Enter, prioritize and complete work orders in the CMMS system. Provide first level review of completed work orders for assigned site. Execute building/facility projects (i.e. installation of new systems, commissioning of building systems). Execute preventive maintenance and demand maintenance tasks